rizoma BMW M1000R B-Pro Frame Sliders Installation Guide
- June 16, 2024
- rizoma
Table of Contents
User Manual Rev.: 00
Welcome to Rizoma
Before you start
We are pleased to welcome you into the world of RIZOMA, and we congratulate
you for your excellent choice. Please carefully follow the instructions in
this guide, which will allow you to mount and use the product correctly and
enjoy all the features it has. For your protection and safety, RIZOMA
expressly recommends that you have the installation of the product performed
by skilled personne. Improper installation, repair or maintenance, can cause
accidents. Keep this user guide as a reference for the future. RIZOMA accepts
no liability for any damage, of any kind, which may be caused, directly or
indirectly, to persons or things as a result of incorrect assembly or faure to
observe all the assembly instructions. We also invite you to compy with the
provisions of the Highway Code and Traf fic rules and/or to additional
regulations in force in your Country.
General conditions
Attention: This component comes assembled for shipping purposes only.
Tighten all fasteners to appropriate torque specifications before riding.
Descriptions preceded by this symbol contain information, instructions, or
procedures, which, if not followed, may result in death or serious injury.
-
Carefully read, understand and follow these instructions, they are an essential part of the product. If you have any doubt whatsoever regarding the installation or use of your RIZOMA product, please see your authorized RIZOMA dealer for assistance (on www.rizoma.com).
-
For correct installation, all tightening has to be done after the correct positioning of the accessories without restricting the moving parts, to not compromise the
correct functioning of the product. -
After installing any Rizoma product, please check that all related components of the motorbike function e.g. brakes, throttle, clutch, lights and steering. We strongly
suggest to repeat these checks periodically, especially after long trips or prolonged periods of not using the bike.
Your RIZOMA products require regular inspection and maintenance. The more you
ride the more often you must inspect your RIZOMA products. If your products
are leaking, bent, deformed, cracked, chipped or worn, no matter how slight,
immediately have a RIZOMA dealer inspect the products before you ride again.
In any case never try to repair or modify the Rizoma products or their
components, always replace with Rizoma original components.
Rizoma products may not be compatible with your motorcycle or with other
aftermarket equipment installed before. For your safety Rizoma suggests to
always contact your RIZOMA dealer.
O.E.M.: original equipment manufacturer.
lider pad mounting kit
– Before you start mountng the product please check the completeness of the kit on the part list. The difficulty level and the time of assembage shown do not include the removal of OEM components. Complete the assembly of the one side before to start the disassembly of the other sde. Warning: Make sure that your motorbike is standing firmly before you start work, as a fall may lead to damage to the motorbike or injury to you or others. WARNING: TO CLEAN YOUR PRODUCT DON’T USE DETERGENT, AGGRESSIVE PRODUCTS OR ABRASIVE SPONGE THAT CAN DAMAGE OR SCRATCH YOUR PRODUCT, BUT USE ONLY NEUTRAL DETERGENT WITH COLD WATER.
– The engine/frame/wheel guards do not provide any protection to any part of your body in the event of a crash. Always wear appropriate protective equpment. The engine/frame/wheel guards are intended to mnmize the damage to your motorcycle in the event of a crash or tip over. However, the guards will not prevent al damage under all circumstances. Improper installation of guards protection can resut in an oil leak, causng an accident, personal injury or death. Follow instructions carefully. Make sure that your motorbke is standing firmly before you start work, as a fall may lead to damage to the motorbike or injury to you or others.
REMOVE RH ORIGINAL SCREW
INSTALL RH SLIDER
REMOVE ORIGINAL SCREW AND SIDE FAIRING
INSTALL BRACKET
INSTALL LH SLIDER
Warnings
– RIZOMA reserves the right, in its sole discretion, to make changes to the
product and this information at any time and without prior notice. Although
many catalogs and advertisements depict riders engaged in extreme or stunt
riding, this activity is extremely dangerous, increases the risk of an
accident, and increases the severity of any injury.
The action depicted is performed by professionals under strictly controlled
riding conditions.
Only you know the limits of your riding ability and only you can control the
conditions under which you ride. By and in consideration for his/her purchase
and use of the RIZOMA product, the user expressly recognizes and agrees that
in the event of any claim arising out of the use of this RIZOMA product,
whether such claim is based in contract, warranty, tort (personal injury or
wrongful death) or otherwise, the laws of the Republic of Italy shall apply
and jurisdiction and venue for any such action shall be in the Courts of Busto
Arsizio, Italy.
All riders are strongly urged to take a motorcycle rider safety clinic. Always
wear a properly fitted and fastened motorcycle helmet (RIZOMA recommends a
full face helmet), that has been approved by ANSI , SNELL, CE, or any other
relevant authority, and any other safety equipment necessary for your riding
style, such as full finger gloves, boots, and body armor.
Be sure to read and follow all the instructions and warnings that originally
accompanied your motorcycle, as well as the literature that accompanied any
other component parts installed on your motorcycle.
Be sure that your tires are inflated to the correct pressure and that there is
no damage whatsoever in the tread or sidewall of the tire.
Legal notes
– Some of our products may not be approved for road circulation in the
countries where homologation is required.
Thus RIZOMA® srl declines any responsibility for a different use of its
products.