JMTek MPB500 Power Bank Instruction Manual
- June 16, 2024
- JMTek
Table of Contents
Power Bank Instruction Manual
Please read the following carefully before using the device to ensure safe and proper usage.
Package Content:
1x Power bank
1x USB-C to USB-C cable
1x User Manual
Specifications:
Capacity: 5000mAh/3.85V
Input(USB-C): 5V/3A,9V/2A,12V/1.5A
Output: total 22.5W
Output(USB-C): 5V/3A,9V/2.22A,12V/1.67A
Wireless: 5W/7.5W/10W/15W Max
USB-C+ Wireless: 5V/3A
LED display and button inside
Charging Your Device Using Your power bank:
IMPORTANT:
Before using your power bank for the first time, fully charge it (whenpowered
on, the LED displays 100%).
Connect the supplied USB-C cable (or the cable that came with your device) to
the power bank’s USB port and to your device. Then begin charging.
During charging of your device, the percentage of battery’s power will
gradually decrease as your device receives power, when the power bank is low
in power, the percentage will flash and go out automatically until all the
power is used up.
The green charging icon in LED will light up once you enter fast charging
mode.
Checking Your Power bank Bat tery’s Charging Status
Momentarily press the power but ton (the LED screen is a but ton) on your
power bank and the percentage of bat tery life remaining will appear on the
LED display, 100% means that the power bank bat tery is fully charged, while
5% or under indicates that it’s almost empty. Know before you go!
If you see the percentage is flashing, the bat tery status is less than 5%.
Please recharge the power bank.
Recharging your power bank:
To recharge your power bank, use the supplied USB cable to connect its USB-C
port to a USB wall charging adapter. While recharging the power bank, the last
digit of the percentage will blink. If there is one digit flashing, the
charging is not completed. Once the power bank is fully charged, the 100% is
displayed.
The green charging icon in LED will light up once you enter fast charging
mode.
NOTE: For best results, do not connect the power bank to a computer’s USB
port.
We recommend using a wall charging adapter that supports fast charging
protocols such as QC or PD.
Wireless Charging:
Press and release the but ton, when the red LED remains illuminated, place
your smartphone that supports wireless charging on the charger surface, the
blue LED indicator will light up once the unit enters wireless charging mode.
To stop the wireless charging funct ion, press the but ton twice quickly or
simply remove the smartphone.
If the smartphone that supports wireless charging is not detected within 30s,
the unit will automatically turn of the wireless output.
It will automat ically turn off if no load is detected within one minute.
This wireless charger can charge smartphones with non-metal protect ive case
or silicone covers that are no thicker than 6mm.
Security advice:
Attent ion
-
Incorrect usage can cause explosions / danger of chemical burns.
-
Damaged batteries can cause chemical burns when they come in contact with human skin.
-
Do not disassemble the item.
-
Never throw the item or parts of it into fire.
-
Never expose the item to high temperature changes Hot/Cold, humidity or liquids.
-
Do not use if the items or parts of it are damaged.
-
Store in a clean and dry space.
-
To maintain bat tery good health, the item should be recharged every 6 months.
Bat tery will loose capacity when stored without charging. -
If the product gets very hot, please disconnect the item and do not use it.
-
Do not put any bare metal objects on the surface of wireless charger when it is operat ing.
FCC STATEMENT :
This device complies with Part 15 of the FCC Rules.
Operation is subject to the following two conditions:
(1) This device may not cause harmful interference, and
(2) This device must accept any interference received, including interference
that may cause undesired operation.
Warning: Changes or modifications not expressly approved by the party
responsible for compliance could void the user’s authority to operate the
equipment.
NOTE: This equipment has been tested and found to comply with the limits
for a Class B digital device, pursuant to Part 15 of the FCC Rules.These
limits are designed to provide reasonable protection against harmful
interference in a residential installation.
This equipment generates uses and can radiate radio frequency energy and, if
not installed and used in accordance with the instructions, may cause harmful
interference to radio communications. However, there is no guarantee that
interference will not occur in a particular installation.If this equipment
does cause harmful interference to radio or television reception,which can be
determined by turning the equipment off and on, the user is encouraged to try
to correct the interference by one or more of the following measures:
Reorient or relocate the receiving antenna.
Increase the separation between the equipment and receiver .
Connect the equipment into an outlet on a circuit different from that to which
the receiver is connected.
Consult the dealer or an experienced radio/TV technician for help.
FCC Radiation Exposure Statement:
The device has been evaluated to meet general RF exposure requirement. The
device can be used in portable exposure condition without restriction.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>