ECR4Kid UL2818G FM SoftZone Single Tunnel Climber User Manual
- June 16, 2024
- ECR4Kid
Table of Contents
ECR4Kid UL2818G FM SoftZone Single Tunnel Climber User Manual
181549-420: Certificate Number
23 Sep 2020 – 12 Jul 2024: Certificate Period
Certified: Status
UL 2818 – 2022 Gold Standard for Chemical Emissions for Building Materials, Finishes and Furnishings
Classroom furniture and furnishings are modeled to the classroom environment with a room volume of 231 m³ and 0.82 air changes per hour (ACH) accommodating 27 students.
Product tested in accordance with UL 2821 test method to show compliance to emission limits on UL 2818. Section 7.1 and 7.2.
GREENGUARD Gold Certification Criteria for Furniture and Mattresses
Criteria| **CAS Number| Maximum Allowable Predicted
Concentration| ****Units
---|---|---|---
TVOC (A)| –| 0.22| mg/m³
Formaldehyde| 50-00-0| 9 (7.3 ppb)| µg/m³
Total Aldehydes (B)| –| 0.043| ppm
4-Phenylcyclohexene| 4994-16-5| 6.5| µg/m³
1-Methyl-2-pyrrolidinone (C)| 872-50-4| 160| µg/m³
** Individual VOCs (D)| –| 1/2 CRELor 1/100th TLV| –
(A) Defined to be the total response of measured VOCs falling within the
C6 – C16 range, with responses calibrated to a toluene surrogate.
(B) The sum of all measured normal aldehydes from formaldehyde through
nonanal, plus benzaldehyde, individually calibrated to a compound specific
standard. Heptanal through nonanal are measured via TD/GC/MS analysis and the
remaining aldehydes are measured using HPLC/UV analysis.
(C) Based on the CA Prop 65 Maximum Allowable Dose Level for inhalation
of 3,200 ʅg/day and an inhalation rate of 20 m³/day.
(D) Allowable levels for chemicals not listed are derived from the lower
of 1/2 the California Office of Environmental Health Hazard Assessment (OEHHA)
Chronic Reference Exposure Level (CREL) as required per the CDPH/EHLB/Standard
Method v1.2 and BIFMA level credit 7.6.2 and 1/100th of the Threshold Limit
Value (TLV) industrial work place standard (Reference: American Conference of
Government Industrial Hygienists, 6500 Glenway, Building D-7, and Cincinnati,
OH 45211-4438).
UL investigated representative samples of the identified Product(s) to the
identified Standard(s) or other requirements in accordance with the agreements
and any applicable program service terms in place between UL and the
Certificate Holder (collectively “Agreement”). The Certificate Holder is
authorized to use the UL Mark for the identified Product(s) manufactured at
the production site(s) covered by the UL Test Report, in accordance with the
terms of the Agreement. This Certificate is valid for the identified dates
unless there is non-compliance with the Agreement.
