MORryde Step Above RV Entry Steps User Guide
- June 5, 2024
- MORryde
Table of Contents
QUALIFIER
GEN 2
Which Step is right for you?
Use the space below to document your measurements.
- THRESHOLD
- HINGE PLATE
- STEP HEIGHT
- DOOR WIDTH
Step 1
MAKE SURE YOUR UNIT IS LEVEL TO ENSURE ACCURATE MEASUREMENTS.
THRESHOLD
Make sure the rise of your threshold is between 5/8″ and 3/4″. If it is
greater or less than either of these measurements, the door may not close
properly.
Step 2
HINGE PLATE
You must have a gap of 3/8″ from the bottom of your entry and screen doors to
the top of the threshold to allow room for the hinge plate. Without this
clearance, your door will not have sufficient room to close while the steps
are down.
If your unit doesn’t meet the specifications in STEP 1 or STEP 2,
modifications WILL NEED to be made. Please call the MORryde sales department
for further assistance. 574-293-1581
OTHER ITEMS TO CONSIDER…
DOOR JAMB TRIM | STRUTS | DOORWAY |
---|---|---|
If there is trim on the back side of the door jamb that protrudes, it will interfere with the latch on the step. The trim will need to be notched 1/4″ – 1/2″ to accommodate the latch.| If the door has a strut that prevents it from opening all the way, the step will hit the door. The strut must be removed for proper step installation.| There must be at least 9″ of clearance on the inside of the doorway for the StepAbove to be able to fold up correctly
Step 3
STEP HEIGHT
Find your step height by measuring from the top of the threshold to the
ground.
Step 4
DOOR WIDTH
Find your door width on the factory label located on the side or edge of the
door.
If there is no label, measure inside at the base of the door from flange to
flange and refer to the Fit Chart for the door width. Keep in mind that the
flange to flange measurement needed is the narrowest part of the entry door.
SKIRTING | HANDRAIL |
---|---|
The skirting below the threshold cannot stick out more than 3/4″. | If there is |
anything on the left side of the entrance of your door within 33″, you will need to remove the handrail before stowing the steps.
AFTERMARKET ACCESSORIES
Aftermarket accessories such as a storm door or a grab handle could cause
interference with the step and may need to be removed or altered for proper
installation of the StepAbove.
STEP ABOVE FIT CHART
| PART NUMBER*| STEP HEIGHT| STEP RISE| DOOR WIDTH
Size from Factory Label| DOOR WIDTH
–OR– Size from Flange to Flange
---|---|---|---|---|---
2 STEP| STP-201| 25″ – 29.5″| 9″| 24″| 21.75″ – 2.25″
STP-202| 25″ – 29.5″| 9″| 26″ – 28″| 23.75″ – 6.25″
3 STEP| STP-203| 34″ – 37″| 9″| 24″| 21.75″ – 2.25″
STP-204| 30″ – 33.5″| 8″| 24″| 21.75″ – 2.25″
STP-206| 30″ – 33.5″| 8″| 26″ – 28″| 23.75″ – 6.25″
STP-207| 34″ – 37″| 9″| 26″ – 28″| 23.75″ – 6.25″
STP-208| 30″ – 33.5″| 8″| 30″ – 32″| 27.75″ – 0.25″
STP-209| 34″ – 37″| 9″| 30″ – 32″| 27.75″ – 0.25″
4 STEP| STP-212| 37.5″ – 42″| 8″| 26″ – 28″| 23.75″ – 6.25″
STP-213| 37.5″ – 42″| 8″| 30″ – 32″| 27.75″ – 0.25″
STEPABOVE® ACCESSORIES
| | | 3 STEP HANDRAIL STP214 -121H
4 STEP HANDRAIL STP214 -120H
---|---|---|---
STORAGE BOX SP54-099| MOTION-ACTIVATED STEP LIGHTS
STP54-032| Please Note| Earlier StepAbove models may require
a different handrail.
At MORryde, we have a passion for solving problems. Whether we’re fabricating custom solutions, modifying a commercial chassis, or engineering innovative products, we answer to a wide range of markets and provide solutions for a variety of needs. At MORryde, it’s simply about doing MORE for our customers, and it doesn’t stop at the sale. We stand behind our products, believing in quality first, service always. No matter the issue, we’ll be the first to respond and the last to be satisfied.
1966 Sterling Avenue • Elkhart, Indiana 46516
574-293-1581 •
www.MORryde.com
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>