Shine SMB-1WH Multi Batch Compact Cold Press Juicer User Manual

Shine SMB-1WH Multi Batch Compact Cold Press Juicer

Product Information

Specifications

• Product : Shine Multi-Batch Compact Cold Press Juicer
• Model : SMB-1WH / SMB-1GY
• Power Rating : 120V, 60Hz, 150W / 220V, 200W
• Juice Container Capacity : Up to 23 oz / 650 mL
• Pulp Container Capacity : Up to 20 oz / 550 mL
• Continuous Operation Time : Up to 20 minutes per session
• Size (W x D x H) : 7.2 x 6.1 x 15.2 in / 184 x 155 x 387 mm
• Weight : 4.3 lbs / 1.9 kg
• Made in : China

Product Usage Instructions:

Important Safeguards
When using electrical appliances, especially when children are present, basic safety precautions should always be followed, including the following

1. Read all instructions.
2. To protect against the risk of electrical shock, do not put the motor body of the appliance in water or other liquid.
3. This appliance is not intended for use by persons (including children) with reduced physical, sensory, or mental capabilities, or lack of experience and knowledge, unless they have been given supervision or instruction concerning the use of the appliance by a person responsible for their safety.

Parts

1. PUSHER – Quickly supports produce feeding into the Quick Fill Top.
2. QUICK FILL TOP – Continuously feeds the hopper for higher juicing volume when needed.
3. PRODUCE HOPPER – Pre-fill the hopper with a wide variety of fruits and vegetables.
4. CHOPPER – Begins the juicing processing by cutting and feeding your produce.
5. EASY CLEAN SCREEN – Filters juice for a clean finish, plus it’s easy to clean with the XL BRUSH.
6. AUGER – This specially designed AUGER never bites off more than it can chew.
7. AUGER HOUSING – Where all the magic happens. The AUGER sits inside here.
8. PRESSURE PLUG – Keeps pulp moving through the machine, preventing jams.
9. JUICE CAP – Keeps your countertop clean between batches.
10. MAIN BODY – Big power in a small footprint.
11. POWER SWITCH – Gives you control to start and stop the machine or run it in reverse.
12. JUICE CONTAINER – Catches your fresh juice.
13. PULP CONTAINER – Collects pulp.
14. BRUSH WITH PULP PICK – Easily gets into tighter spaces.
15. XL BRUSH – Makes cleaning quick and easy.

Tips and Tricks
We are so happy to welcome you to the #tribestlife! Please take a moment to read through this quick start guide before you move on to the assembly instructions so you can best enjoy the use of your new tool for healthy living! For the best juicing experience
Your juicer will not turn on unless all parts are properly assembled. To do this, please be sure to follow the assembly instructions on the following pages to ensure the safety switch is completely engaged.

FAQ

• Q: How do I assemble the juicer?
  A: To assemble the juicer, please follow the assembly instructions provided in the user manual. Make sure all parts are properly connected and the safety switch is engaged.

• Q: Can I put the motor body of the appliance in water?
  A: No, to protect against the risk of electrical shock, do not put the motor body of the appliance in water or any other liquid.

• Q: What is the maximum continuous operation time for the juicer?
  A: The juicer can operate continuously for up to 20 minutes per session. It is recommended to give the juicer a break after each session to prevent overheating.

• Q: How do I clean the juicer?
  A: The juicer can be cleaned using the provided XL BRUSH and EASY CLEAN SCREEN. Follow the cleaning instructions in the user manual for detailed guidance.

PRODUCT SPECIFICATIONS

IMPORTANT SAFEGUARDS

When using electrical appliances, especially when children are present, basic safety precautions should always be followed, including the following

1. Read all instructions.
2. To protect against the risk of electrical shock, do not put the motor body of the appliance in water or other liquid.
3. This appliance is not intended for use by persons (including children) with reduced physical, sensory, or mental capabilities, or lack of experience and knowledge, unless they are closely supervised and instructed concerning use of the appliance by a person responsible for their safety. Close supervision is necessary when any appliance is used by or near children. Children should be supervised to ensure that they do not play with the appliance.
4. Turn the appliance OFF, then unplug from the outlet when not in use, before assembling or disassembling parts and before cleaning. To unplug, grasp the plug and pull from the outlet. Never pull from the power cord.
5. Avoid contacting moving parts. Never feed food by hand. Always use the included pusher.
6. Do not operate any appliance with a damaged cord or plug, after the appliance malfunctions, or is dropped or damaged in any manner. Contact the authorized service center for repairs.
7. The use of third-party attachments, including canning jars, is not recommended and may cause a risk of injury.
8. Do not use outdoors.
9. Do not let the cord hang over the edge of your table or counter.
10. Blade edges are sharp. Handle carefully.
11. Do not use fingers to scrape food away while the appliance is operating. Cuts and other injuries may result.
12. Always make sure the appliance is fully assembled and all parts are locked securely in place before turning the motor on. Do not unfasten any parts while the appliance is in operation.
13. Be sure to turn the switch to the OFF position after each use. Make sure the motor stops completely before disassembling.
14. Do not put your fingers or other objects into the hopper opening while it is in operation. If food becomes lodged in opening, use the pusher or another piece of fruit or vegetable to push it down. When this method is not possible, turn the motor off and disassemble the appliance to remove the remaining food.
15. Do not use the appliance if any of the parts are damaged. Contact the authorized service center for repairs.
16. Do not operate without the pulp container in place.
17. This appliance has a polarized plug (one blade is wider than the other). To reduce the risk of electric shock, this plug will fit in a polarized outlet only in one way. If the plug does not fit fully in the outlet, reverse the plug. If it still does not fit, contact the authorized service center. Do not modify the plug in any way.
18. Unplug the appliance when not in use, before putting on or taking off any parts, and before cleaning.
19. Make sure to use the proper electrical power supply. Use 120V, 60 Hz AC power for appliances with A-type plugs. Use only 240V, 50 Hz AC power for C-Type plugs. Do not use a plug adapter with this appliance.
20. Do not use the appliance if there is any damage to any of the parts. Contact the authorized service center for repair.
21. Before using the appliance, please make sure that all the parts are properly assembled.
22. Only use the appliance on flat and sturdy surfaces or countertops. Avoid using the appliance on top of soft or uneven surfaces.
23. Do not insert any foreign objects into the appliance as this will cause damage to the parts. Only use the included pusher to push food into the hopper.
24. Do not use the appliance continuously for longer than 20 minutes per session. Allow the juicer to rest for 30 minutes between operations.
25. If you encounter abnormal sounds, odor, excessive heat, or smoke, please immediately turn off the power supply and contact the authorized service center.
26. Keep the appliance away from high temperature, strong magnetic, flammable, or explosive gas environments to prevent damage. Do not place the appliance or any part in the dishwasher, microwave oven, or UV disinfection cabinet.

PARTS

1. PUSHER
   Quickly supports produce feeding into the Quick Fill Top.

2. QUICK FILL TOP
   Continuously feeds the hopper for higher juicing volume when needed.

3. PRODUCE HOPPER
   Pre-fill the hopper with a wide variety of fruits and vegetables.

4. EASY CLEAN SCREEN
   Filters juice for a clean finish, plus it’s easy to clean with the XL BRUSH.

5. CHOPPER
   Begins the juicing processing by cutting and feeding your produce.

6. AUGER
   This specially designed AUGER never bites off more than it can chew.

7. AUGER HOUSING
   Where all the magic happens. The AUGER sits inside here.

8. PRESSURE PLUG
   Keeps pulp moving through the machine, preventing jams.

9. JUICE CAP
   Keeps your countertop clean between batches.

10. MAIN BODY
    Big power in a small footprint.

11. POWER SWITCH
    Gives you control to start and stop the machine or run it in reverse.

12. PULP CONTAINER
    Collects pulp.

13. JUICE CONTAINER
    Catches your fresh juice. Collects pulp.

14. BRUSH WITH PULP PICK
    Easily gets into tighter spaces.

15. XL BRUSH
    Makes cleaning quick and easy

TIPS AND TRICKS

We are so happy to welcome you to the #tribestlife!
Please take a moment to read through this quick start guide before you move on to the assembly instructions so you can best enjoy the use of your new tool for healthy living! For the best juicing experience:
Your juicer will not turn on unless all parts are properly assembled. To do this, please be sure to follow the assembly instructions on the following pages to ensure the safety switch is completely engaged.

Make sure the AUGER and SCREEN are fully seated before twisting the PRODUCE HOPPER into the locked position.

• While juicing, feed in produce then watch for the pulp to eject out of the pulp outlet. You may feed the juicer continuously, but do not force the machine to work faster by overfeeding it. If you overfeed the machine and cause a jam, use the REVERSE Function (REV) to dislodge it.
• For easier cleaning at the end of your juicing cycle, run water through the HOPPER with the machine on. This will push out most of the remaining pulp and shorten your cleaning time.
• Your machine is equipped with overheat protection. This machine has a compact motor that is designed to run for no more than 20 minutes continuously. If your motor starts to heat up, it will automatically shut off until it cools back down in order to prevent damage to the motor by overheating. Wait until the machine cools down before resuming any juicing activity.
• We offer replacement parts and additional juicing accessories at
  www.shinekitchen.co. If you need support or special shipping options, please contact our customer service center at service@tribest.com or 1-888-254-7336.

 HOW TO ASSEMBLE

BEFORE YOU BEGIN

• Make sure the machine is not plugged in prior to assembling the machine.
• Make sure the POWER SWITCH is in the OFF position prior to assembling the machine.
• Before using the juicer for the first time, clean all parts, except for the MAIN BODY, with warm water and soap. Then rinse and dry thoroughly.
  WARNING : Never immerse the MAIN BODY in water.

1. STEP 1
   Place the AUGER HOUSING on top of the MAIN BODY, making sure both the juice and pulp outlets are fully seated. Push the AUGER firmly into the center of the AUGER HOUSING, making sure the AUGER is fully seated on the bottom.

2. STEP 2
   Place the SCREEN over the AUGER into the AUGER HOUSING. Then align the SCREEN over the top with the arrow pointing over the pulp outlet and lightly twist to a seated position.

3. STEP 3
   Open the QUICK FILL TOP lid of the HOPPER. Place the HOPPER on top of the AUGER HOUSING and then twist the HOPPER into the locked position using the lock image on the AUGER HOUSING as a guide.

4. STEP 4
   Close the QUICK FILL TOP lid. Now the juicer is ready to operate. Before you begin juicing, place the JUICE CONTAINER under the spout with the JUICE CAP in the closed position. Align the PULP CONTAINER under the pulp outlet.
   Congratulations—you are ready to juice! Follow the steps in the next page for best results with juicing operation.

USING THE JUICER

BEFORE YOU BEGIN

• Make sure the POWER SWITCH is in the OFF position before you begin.
• Make sure the JUICE CONTAINER and PULP CONTAINER are in the correct position.
• Make sure the JUICE CAP is open before you begin juicing.
• Plug in your juicer.

PREPARATION
Prepare your fruits and/or vegetables for your juicing session. It is recommended to cut stringy vegetables like celery into small strips or cubes. Cutting your produce will allow you to fit more into the HOPPER for hands-free juicing. See examples below:

1. STEP 1
   Open the QUICK FILL TOP to and begin by filling up the HOPPER with fresh produce for simple batch juicing. Then close the QUICK FILL TOP.

2. STEP 2
   Turn on the machine by turning the POWER SWITCH to the ON position.
   NOTE : The machine will not operate unless all parts are properly assembled. The QUICK FILL TOP must be completely closed to turn on. Refer to the assembly instructions on page 8.

3. STEP 3
   Open the JUICE CAP as juice starts to fill the AUGER HOUSING. Continue adding produce through the QUICK FILL TOP slot for easy continuous feed operation.

4. STEP 4
   Allow the juicer to run for 30 seconds after the last ingredient was fed. Then turn off the machine once juice is no longer flowing.
   NOTE : The PUSHER only needs to be used if ingredients are stuck inside the HOPPER. Using the REVERSE Function (REV) can also dislodge food.

CONTINUOUS OPERATION TIME:
Do not use the juicer continuously for longer than 20 minutes per session. Allow the juicer to rest for 30 minutes between operations.
OVERHEAT PROTECTION
Your juicer is equipped with an automatic shut off feature to protect your motor from burning out. If the motor overheats during juicing, your machine will automatically shut off. If this happens, it is recommended to allow your juicer to rest for 20-30 minutes after overheat protection kicks in. For additional information, refer to the troubleshooting guide on page 15.

 HOW TO DISASSEMBLE

BEFORE YOU BEGIN
Before disassembling the juicer after use, switch the juicer to the OFF position on the POWER SWITCH and disconnect the juicer from the power source.

1. STEP 1
   First open the QUICK FILL TOP lid. Then unlock the HOPPER by turning it counterclockwise to the unlocked position . Lift up the HOPPER.

2. STEP 2
   Lift up the AUGER HOUSING and bring all the juicing parts to the kitchen sink for cleaning.

3. STEP 3
   Remove the SCREEN from the AUGER HOUSING by lifting it up vertically.

4. STEP 4
   Remove the AUGER from the AUGER HOUSING by lifting it up vertically.

If you have any difficulty with disassembly of your machine, see page 15 for troubleshooting tips.

CLEANING

1. Wash immediately after each use to avoid pulp residue.
2. Wash and rinse the parts shown below with warm water and soap. These parts may be soaked for easier cleaning. Use the cleaning BRUSHES to thoroughly clean all juicing parts.
3. Use a damp cloth or sponge to clean and wipe down the MAIN BODY after use, if necessary. Never submerge or use running water over the MAIN BODY.
4. Dry all parts with a cloth to prevent water spots before putting them away for storage.

TIP : Use the BRUSH WITH PULP PICK to quickly clean the pulp out from the underside of the AUGER.

CLEANING THE PRESSURE PLUG
To clean the pulp outlet of the AUGER HOUSING, simply pull out the PRESSURE PLUG from the bottom and clean under running water. Then dry and push the plug back once it is dry.
Note : Do not remove the screw that holds the PRESSURE PLUG in place.

USEFUL TIPS

normal. To effectively juice fibrous produce, your juicer has been designed to give in order to provide more torque during juicing.
**Squeaking sounds are normal.| It’s from friction as the pulp rubs against the moving parts of the juicer.
****Do not use ice or frozen fruit.| Ice is too hard to be squeezed and can damage the juicing parts.
****Do not use hard or dried food.| Certain hard or dried foods, like almonds, can damage the juicing parts.
Cut fibrous produce into 1-2 inch pieces.| Long and stringy fibers can wrap around the AUGER and cause the juicer to stall or damage the juicing parts.
Do not put hard pits or seeds into the juicer.| Hard pits and seeds can damage the juicing parts. Please remove pits and seeds from the produce before juicing.
Only use the included PUSHER to push food into the juicer.| Other objects such as knives or spoons can damage the juicing parts.
Do not operate the juicer for more than 20 minutes at a time.| Overusing the juicer can cause the motor to overheat. Please wait 30 minutes between operations.
Do not put the pulp through a second time.| Re- juicing the pulp can cause the juicer to back up and damage the juicing parts.
Enjoy your juice as soon as possible.**| We recommend drinking your juice immediately for the best flavor and nutrition.

If you have any questions, comments, or need any tips, please feel free to call us or send us an email. If you purchased your product outside of the United States, please refer to your warranty card for your nearest service center.

• United States
  Shine Kitchen Co. by Tribest 1143 N. Patt St. Anaheim, CA 92801
  Toll-Free : 1-888-254-7336
  service@tribest.com

• International
  Shine Kitchen Co. by Tribest 1143 N. Patt St.
  Anaheim, CA 92801
  Telephone : +1 714 879 7150
  service@tribest.com

TROUBLESHOOTING

• Your electrical outlet is not working. Make sure the power cord is plugged into a functioning outlet.
• The parts have not been assembled correctly. Make sure all parts are properly assembled as shown on page 8.
• The safety switch has not been engaged. The HOPPER must be twisted into the locked position and the QUICK FILL TOP clicked down into place.

The juicer stopped running suddenly.|

• Use the REVERSE Function (REV) to dislodge any jams. If the machine still isn’t running, try cleaning the machine thoroughly before use.
• If the motor overheats during juicing, your machine will automatically shut off for protection. If this happens, it is recommended to allow your juicer to rest for 20-30 minutes after overheat protection kicks in.

**The juice yield is low or juice flows out of the AUGER HOUSING.| The AUGER HOUSING and PRESSURE PLUG are not installed properly. Make sure the PRESSURE PLUG is plugged all the way into its slot and the AUGER HOUSING is fully seated on the MAIN BODY. Refer to instructions on page 8.
The SCREEN and AUGER**

parts will not come apart.

| Twist the CHOPPER lightly back and forth to release any pressure, then pull the SCREEN straight up. If the problem persists, contact customer service.
Mineral deposits have formed on the parts.| Mineral deposits are common over time and can cause parts to look dull. To remove mineral deposits, we recommend soaking in a solution of hydrogen peroxide and water (50/50) for 30 minutes to an hour, then scrubbing with warm water and soap. To prevent buildup, wash the parts right after juicing for best results. Do not let them sit.
The containers and parts are stained after use.| Parts can get stained due to the natural dye pigments of fruits and veggies, such as turmeric, carrots, and beets. Make sure to clean the juicer immediately after use under running water using the cleaning BRUSHES. You can try to remove some of the colored stains by soaking the parts in 70% white wine vinegar and 30% water.

• Shine Kitchen Co. by Tribest Anaheim, California
• Toll-Free USA: 1 888-254-7336
• International : +1 714 879 7150
• service@tribest.com
• tribest.com
• shinekitchen.co
• Follow us @tribestlife

Model : SMB-1WH / SMB-1GY
© 2023 Shine Kitchen Co. by Tribest

References

• Shine Kitchen Co. Products | Tribest
• Shop Tribest | USA Official Site | Making Heathy Living Easy | Tribest
• Shine Kitchen Co. Products | Tribest

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>