LONE AUDIO LA-100WIKIT Bluetooth and WiFi Ceiling Speakers Instruction Manual

LONE AUDIO LA-100WIKIT Bluetooth and WiFi Ceiling Speakers

INSTRUCTION

Congratulations to the purchase of this LONE AUDIO product. Please read this manual thoroughly prior to using the unit in order to benefit fully from all features. Read the manual prior to using the unit. Follow the instructions in order not to invalidate the warranty. Take all precautions to avoid fire and/or electrical shock. Repairs must only be carried out by a qualified technician in order to avoid electrical shock. Keep the manual for future reference.

Prior to using the unit, please ask for advice from a specialist. When the unit is switched on for the first time, some smell may occur. This is normal and will disappear after a while.

• The unit contains voltage-carrying parts. Therefore, do not open the housing.
• Do not place metal objects or pour liquids into the unit this may cause electrical shock and malfunction.
• Do not place the unit near heat sources such as radiators, etc. Do not place the unit on a vibrating surface. Do not cover the ventilation holes.
• The unit is not suitable for continuous use.
• Be careful with the mains lead and do not damage it. A faulty or damaged mains lead can cause electrical shock and malfunction.
• When unplugging the unit from a mains outlet, always use the plug, never the lead.
• Do not plug or unplug the unit with wet hands.
• If the plug and/or the mains lead are damaged, they need to be replaced by a qualified technician.
• If the unit is damaged to such an extent that internal parts are visible, do NOT plug the unit into the main outlet, and DO NOT switch the unit on. Contact your dealer. DoNOT connects the unit to a rheostat or dimmer.
• To avoid fire and shock hazards, do not expose the unit to rain and moisture.
• All repairs should be carried out by a qualified technician only.
• Connect the unit to an earthed mains outlet (220-240Vac/50Hz) protected by a 10-16A fuse.
• During a thunderstorm or if the unit will not be used for alonger period of time, unplug it from the mains. The rules: Unplug it from the mains when not in use.
• If the unit has not been used for a longer period of time, condensation may occur. Let the unit reach room temperature before you switch it on.
• For use in humid rooms or outdoors: refer to theinstallation guidelines for safe assembly.
• To prevent accidents in companies, you must follow the applicable guidelines and follow the instructions.

OVERVIEW

1. DC Power connector for the adapter
2. Speaker output connector for the passive speaker
3. Infrared receiver and status indicator LED

REMOTE CONTROL

• Power ON / OFF
• Short press for join the speaker group
• Long press for exit the speaker group
• Switch EQ Effect
• Volume Up
• Volume Down
• Previous
• Play / Pause
• Next
• Switch UP for the predefined channel
• Switch Down for the predefined channel
• Short press for switch to the BT play mode
• Long press for switch to the BT pair mode
• Short press for connect the speaker to the WIFI
• Long press for restore to the factory settings
• Switch between BT and WIFI

INSTALLATION

1. Drill a hole in the ceiling, big enough to fit the speaker (check technical specification sheet for size).
2. Connect the active speaker with the 12VDC adapter.
3. Connect active and passive speaker with speaker cable (+/-).
4. Insert the speaker in the hole.
5. Tighten each of the adjusting screws firmly. (the locking tabs will swivel into the rear surface).
6. Place the metal grill.

CONNECTING WITH BT

Connecting your BT-device to the speaker, follow below steps:

1. Turn on BT on your device
2. Search for “BT-SPEAKER”
3. Connect with “BT-SPEAKER”

Your device is now connected, no password needed.

DISCONNECTING OR RECONNECTING WITH BT

If you want to change from BT-device, follow below steps:

1. Disconnect the current BT-device (“OFF”)
2. Connect new BT-device by following above steps

If you move out of range or turn off the BT-function on your device, the BT of the speaker will disconnect. To reconnect turn on the BT on the device.

DOWNLOAD AND INSTALL LEGACY PLAYER APP
For the best user experience, please download the latest version of the LEGACY Player app via Apple store or Google play. Here you will also find the latest features and explanations on how to use them.

The specifications are typical. The actual values can slightly change from one unit to the other. Specifications can be changed  without prior notice. The products referred to in this manual conform to the European Community Directives to which they are subject:

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>