Shine LUEST SL-CL-801 Modern Ceiling Light, 41.3 Inch Dimmable LED Chandelier Installation Guide
- June 9, 2024
- Shine LUEST
Table of Contents
Shine LUEST SL-CL-801 Modern Ceiling Light, 41.3 Inch Dimmable LED
Chandelier Installation Guide
Manual
Important: Please read and understand this manual before any assembly. Before
assembling this product, please ensure that all parts are in place. Compare
the de-tails with the product display presentation. If you have any questions,
don’ t hesi-tate to contact us through Amazon or E-Mail:
slasst01@163.com
Safety Rules
- To reduce the risk of electric shock, turn off the electricity to the light at the main fuse box or circuit panel before beginning.
- All wiring must be in accordance with the local electrical codes or National Electrical Code. Electrica installation should be performed by a qualified licensed electrician.
- To avoid personal injury, the use of gloves may be necessary while handling parts with sharp edges. 4. Make sure the installation site you choose allows clear space for the rings.
- WARNING: To reduce the risk of fire, electric shock, or personal injury, mount light only to an outlet box marked acceptable for ceil-ing which has enough heavy capacity support and use mounting screws provided with the wiring box. Not all wiring boxes commonly used for the support of lighting fixtures are acceptable for this light.
- The outlet box and ceiling lamp metal base must be securely mounted and capable of supporting this lighting fixture.
- To avoid personal injury or damage to the light and other items, be cautious when working around.
- After making electrical connections. Just insert the plug on the cir-cuit board, and no need to arrange it in order.
- Electrical diagrams are for reference only.
- During the installation, if you found the defective parts need to be replaced or consult a qualified electrician or our After-Sale Service Help if in doubt.
Tool Required
Package Includes
Check to see that you have received the following parts:
Accessories Included
- Small Metal Wrench x 1
- Small Pack Contain Screws And Simple Wire Connector x 1
- Remote Receiver With Driver And Wiring Plate x 1
- Large Plus Ring x 2 + 1# Screw Pipe x 4
- Large Ring x 2 + 2# Screw Pipe x 4
- Medium Ring x 2 + 2# Screw Pipe x 4
- Small Ring x 2 + 3# Screw Pipe x 2
- Black/White Metal Pedestal
- Hanging Board x 1
- Hex Screw x 17
Tips:
If necessary parts are missing, please contact our after-sale service and we
will help you solve the problem as soon as possible
Assemble The Parts
Assemble only need a small wrench which included in the small pack of screws
-
Screw the support rods to the rings
-
Assemble the rods to the black pedestal with nuts by wrenches, Installation from LARGE RINGS TO SMAL
-
Connect the line to the wiring board randomly, the order of it can be ignored
-
Put the small white box (remote receiver and driver) in black pedestal to ready for connect the power cord and install it to the ceiling
Install To Ceiling
Please make sure the power are off and wearing electrician gloves before power wire connection
Finally confirm whether all wiring numbers of the lamp are correct, and refer
to the following figure. Afte ‘Hi Ccfri+ Al iition, the 3M engineering glue on
the back of the drive and wiring board can be removed and pasted into the
Black/White Metal pedstal.
Install the metal
cross hanging board to the ceiling. The light’s wire connection is sparted by
‘N’ & ‘L’. Which means ‘N’ is ‘Neutral Wire’, ‘L’ means ‘Live Wire’.
Please carry out under the guidance of professional installation person-nel to avoid unnecessary danger and trouble. If you have any doubts or need to answer questions about the lamp, please feel free to contact us.
Troubleshooting
Please read all installation instructions carefully. After reviewing the following tips, if you are unable to solve a problem Please contact customer after-sale service by Amazon.
Rings Ceiling Light Not Responding to remote control
-
Check that all wire connections are secured and made as instructed.
-
if the terminal is normal and the interface is not loose, please turn off the power. Then reboot the power again, long press the ‘Pair’ Button for 3-5 seconds.
Light Doesn’ t Work -
Check all wire connections at ceiling and receiver.
-
Coonfirm that LED wire leads and termainal block are properly connected to the LED board.
Care Clean
- Periodic cleaning of your new rings ceiling light is the only main-tenance that is needed.
- Dust your rings ceiling light regularly with a soft , dry cloth. Do not use the harsh cleaners or materials as they may damage the device.
- Abrasive cleaning agents are not required and should be avoid-ed to prevent damage to Arcylic Lampbody.
- Do not use the water while cleaning your rings ceiling light. It could damage the Acrylic Material & LED Driver.
Warranty
Dear Customer,
This product is free from defects in materials and workmanship for a period of 1 year from the day of purchasing.
If the product has been misused, damaged by accident or in any other way of
improper use, this warranty becomes void.
Tips
A,B,C buttons are for group control, one controller could control 1 to 3
light fixtures
How to matching the ceiling light to remote control?
While turning on the lights, press remote control’s” A” key for 5 seconds, the light will flash 3 times indicating the pairing is successful.
How to matching the ceiling light to app/remote control?
While turning on the lights, press remote control’s “A” key or App’s 0 for 5
seconds, the light will flash 3 times indicating the pairing is successful.
Tips:
While using the app to pairing the singal the phone’s Bluetooth should be
opening. You can only use one controller to control the light at a time.
Change the controller will request singal re-pairing.
APP Control
Please scan the QR code in the picture above to download.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>