SHINE INDUSTRIAL HB902S Smart Body Fat Scale User Manual

SHINE INDUSTRIAL HB902S Smart Body Fat Scale

Warning

1. This appliance can be used by children aged 8 years and above and persons with reduced physical, sensory or mental capabilities or lack of experience and knowledge if they have been given supervision or instruction concerning the use of the appliance in a safe way and understand the hazards involved.
2. Children shall not play with the appliance.
3. Cleaning and user maintenance shall not be done by children without supervision.
4. Model of battery that the appliance used is 3xAAA.
5. Non-rechargeable batteries are not to be recharged.
6. Different types of batteries or new and used batteries are not to be mixed.
7. Batteries are to be inserted with the correct polarity.
8. Exhausted batteries are to be removed from the appliance and safely disposed of.
9. If the appliance is to be stored unused for a long period, the batteries are removed.
10. The supply terminals are not to be short-circuited.
11. Take the scale, turn it over, open the battery compartment, put 3xAAA batteries according to the right polarities, and then return the battery compartment cover.

Vitafit Smart Body Fat Scale
Thank you for choosing the Vitafit Smart Body Fat Scale. This scale is your personal health assistant.
It uses bio-electrical impedance analysis(BIA) technology to offer you the data you need to keep track of your health; BMI (Body Mass Index), Body Fat, Body Water, Muscle Mass, Bone Mass, Protein, and much more! We sincerely hope that you enjoy using your new Vita fit scale.
Safety Cautions

1. This scale is not intended for commercial use.
2. This scale should not be used to diagnose or treat any medical condition. Consult your primary care physician before making changes to your diet, exercise plans, or physical activities.
3. If you are pregnant and have a pacemaker or other internal device, you should not use the body fat function of this smart scale. Please note that all data should be used as a reference and is not a substitute for medical advice from a licensed healthcare professional.
4. Check the scale before use. Do not use the scale if it is damaged in any way.
5. The glass platform is slippery when wet. Make sure the platform and your feet are dry before stepping on for measurement.

Use and Care

1. To weigh safely and accurately, stand with your feet shoulder-width apart while on the scale.
2. DO NOT strike or drop the scale.
3. DO NOT stand on the edge of the scale or jump on it.
4. DO NOT stand on the scale platform for a prolonged period or when not in operation.
5. DO NOT store or operate near heat sources or in humid environments.
6. Handle the scale with care, as it is a precision instrument.
7. Clean the scale with a clean and dry cloth. Avoid getting water or any other liquid inside the scale.
8. DO NOT use chemical or abrasive cleaning agents to clean the scale.
9. Keep the scale in a cool and dry environment.
10. Always keep the scale in a horizontal position, do not store it vertically.
11. If the scale fails to turn on, check whether the batteries are installed correctly. Replace the batteries if necessary.
12. If an error appears on the display or if the scale does not turn off automatically, remove the batteries for over 30 seconds, then reinstall them.
13. DO NOT overload the scale (maximum weight capacity: 182 kg / 400 lb/28st).
14. DO NOT mix new and used batteries or different battery brands to power the scale.

First Time Setup
IMPORTANT! BEFORE USE: Remove the isolator tab from the battery compartment.

Operation

Weighing withoutVitafitApp

1. Remove the isolator tab from the battery compartment.
2. For best accuracy, place the scale on a hard and flat floor. Carpeted or uneven floors can negatively affect the accuracy.
3. The scale operates with step-on technology but needs to be calibrated automatically under the following occasions.
   • A. when first-time use, moving the scale or battery exchange, the scale will display scale itself weight, and appear “CAL” after around 1 second, and then display “0.0” or “0.00” after around 2 seconds, now it’s ready to step on to weigh normally.
   • B. If step on the scale before calibration, the scale will display a wrong weight and appear “CAL” after around 1 second, and then display “0.0” or “0.00” after around 2 seconds.
   • After calibration, please step again on to weigh and get the correct weight.
4. Under other occasions, please step on to weigh directly.
5. Step off the scale, the weight readings remain for several seconds. Then the scale will turn off automatically.
6. When Weighing without, the scale only displays weight data and switches the unit by pressing the unit button on the backside of the scale.

Weighing with the Vitafit App
The Vitafit Bluetooth Scale can connect with your mobile phone or iPad via Bluetooth. The Body Weight and body fat result data will be shown on the App named “Vita Fit”, which is easy to download from the 10S App Store or Google Play.

Download the App and Register ID

• Scan the QR code or Download” Vitafit” via I OS App Store or Google Play.
• Register Your ID, Then add personal data and confirm OK.

Set Special User Mode

• Under these modes, we adopt zero-current technology that only measures weight and BMI.

1. lf you are pregnant, or have a pacemaker or other internal device, please choose Weight Only Mode for safety measurement.
2. lf the user is under 2years old, put in the baby’s age and height, the Vitafit app will automatically recognize and enter a baby mode that only measures weight.
3. lf the user is between 2-18 years old, put in the child’s age and height, and the Vitafit app will automatically recognize and enter child mode.

Note: When measuring with VitafitApp, please switch the unit via the App, the scale will keep the same unit with the App.
Let’s make it clear, the unit button on the backside of the scale will be nonfunctional when the scale is connected to VitafitApp.

Pairing the Vitafit Scale with your smartphone
Turn on Bluetooth® on your smartphone.
NOTE: For Android users, Location and Bluetooth® must be turned on for Android 6.0 and later. OR ELSE THE APP WON’T GET RESULTS ACCORDING TO ANDROID REGULATIONS.

1. Tap + on the measuring page to discover the scale.
2. Step onto the scale with bare feet, then add the device named “Vitafit Body Fat”.
3. Keep standing on the scale for 5-1 D seconds. Pairing is successful when your final weight and body fat results appear on the Vitafit app.

Viewing Reports

1. The body measurement result is divided into two parts Body composition and Body Index”, Click each bar to view each part of the result.
2. Click each measurement bar, you can view the history data for the previous three times.
3. To view comparison data, click the banner the weight section.
4. To view comparison data for a specific time, and select the starting date and ending date to generate the report, you can save or share your progress with friends via Facebook and Instagram by Clicking the ·share” button on this page.
5. Click Trend to view your progress history. You can select your progress for the week, month, or year.
6. To view data for a specific day, click the calendar logo in the top right corner of the screen.
7. To view reference data from a specific time frame, click Data Select, then select a date.

Deleting Reference Data

1. To delete a reference data, click Select and select date, then click the” #.

Adding/Deleting Users and Other Settings

1. On the Measurement page, tap My Account at the bottom of the screen.
2. To add new users, click Member select”Add a user# and then enter the new user information.
3. To delete a user. first, click Edit and delete. and then confirm.
4. To delete the account, first click the SET logo and click” DeleteAccounr.
5. other settings: You can set goal weights, change weight units, select sounds, select languages, and set weighing reminders on the current page.

Connecting with Other Fitness Apps

Google Fit

1. On the page of My Account, Select Google Fit from the menu.
2. Turn on Google Fit, then sign in to your Google Account. You will be automatically redirected to the Google Fit page. After successfully connecting, your measurement data will sync with Google Fit.

Note: In the Android system, couldn’t be allowed to Sync with Apple Health.

Apple Health

1. On the page of My Account, Select Apple Health from the menu.
2. ClikAuthorize and the App will authorize immediately.
3. Open the Health App on your iPhone, then tap Sources. Be sure to turn on your Bluetooth®.
4. SelectVitafit from the list.
5. Turn on all categories to allow the Vitafit app to work.

Note: In the IOS system, couldn’t be allowed to Sync with Google Fit.

Fitbit

1. On the page of My Account, Select Fitbit from the menu.
2. Turn on Fitbit, then sign into your Fitbit account.
3. Tap Allow to access the Fitbit app.
4. After successfully connecting, your data will sync to the Fitbit app. You will be able to view your progress both on the app as well as online.

Frequently Asked Questions

Why doesn't the scale turn on?

Check whether the batteries are properly installed.

Why does the data flash on the screen and then disappear?

The batteries are low and to be replaced

Why doesn't the scale connect with the Vitafit app?

Make sure your phone's operating system is running on i0S 9.0+ or Android 4.3+. Download and open the latest version of the Vita fit app. Turn on Bluetooth® on your phone (for Android users, make sure your Location is turned on as well).

Why is my body fat not measured when weighing in?

Step on the scale with dry and bare feet,Place are feet on the scale's conductive areas. Make sure Bluetooth® is turned on. Enter your personal information when creating your Vitafit account. Make sure to place your feet on the scale's conductive areas.

Package Contents

Specifications

• Capacity: Min 5 kg/11 lb/0:11 lb  Max 182kg/400Ib/28st
• Weight unit: kg/lb/st
• Graduation: 0.05kg/0.1Ib/0.1Ib
• Dimensions: 280x280x24mm or 300x300x24mm(Depended on the model)
• Display: LCD or LED (Depending on the model)
• Platform: Tempered glass
• Batteries: 3xAAA

Warranty Information

• Vitafit guarantees all products to be of the highest quality in material and craftsmanship and provides all products with 3 3-year warranty effective from the date of purchase.
• For more information please visit www.51vitafit.com, www.vitafit.com.
• Email: service@51vitafit.com.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>