Shine SES-100 Electric Spiralizer User Manual
- June 3, 2024
- SHINE
Table of Contents
SES-100 Electric Spiralizer
User Manual
SES-100 Electric Spiralizer
Please read this
manual carefully before using.
Shine Kitchen Co. by Tribest
Anaheim, California
Toll-Free USA: 1-888-254-7336
International: 1-714-879-7150
service@tribest.com
tribest.com /
shinekitchen.com
Follow us @tribestlife
Model: SES-100
Rated Power: 120V, 100W
© 2021 Shine Kitchen Co. by Tribest
PRODUCT SPECIFICATIONS
Product | Shine Electric Spiralizer |
---|---|
Model | SES-100 |
Power Rating | 120V, 100W |
Capacity | 60 oz / 1.8 L |
Size (W x D x H) | 8.5 x 5.5 x 13 in / 216 x 140 x 330 mm |
Weight | 3 lbs / 1.4 kg |
Made in | China |
IMPORTANT SAFEGUARDS
When using electrical appliances, especially when children are present, basic safety precautions should always be followed, including the following:
- Read all instructions.
- To protect against risk of electrical shock, do not put appliance in water or other liquid.
- This appliance is not intended for use by persons (including children) with reduced physical, sensory, or mental capabilities, or lack of experience and knowledge, unless they are closely supervised and instructed concerning use of the appliance by a person responsible for their safety. Close supervision is necessary when any appliance is used by or near children. Children should be supervised to ensure that they do not play with the appliance.
- Before assembling or disassembling parts and before cleaning, make sure to turn the appliance OFF, then unplug from the outlet when not in use. To unplug, grasp the plug and pull from the outlet. Never pull from the power cord.
- Avoid contacting moving parts. Keep hands, hair, clothing, as well as spatulas and other utensils away from the appliance during operation to reduce the risk of injury to persons, or damage to the appliance. Never feed food by hand. Always use the included produce holder.
- Do not use fingers to scrape food away from the blade attachments while the appliance is operating. Cuts and other injuries may result.
- Keep hands and utensils out of the container to reduce the risk of injury to persons or damage to the appliance.
- Container must be properly in place before operating the appliance.
- Do not operate any appliance with a damaged cord or plug or after the appliance malfunctions, or is dropped or damaged in any manner. Contact the manufacturer at their customer service telephone number for information on examination, repair, or adjustment.
- The use of attachments not recommended or sold by the manufacturer may cause fire, electric shock, or injury.
- Household and indoor use only. Do not use outdoors.
- Do not let the cord hang over the edge of tables or counters.
- Do not place on or near a hot gas or electric burner or in a heated oven.
- Always confirm the appliance is switched OFF before plugging cord into a wall outlet.
- Do not use the appliance for other than its intended use.
- Any maintenance servicing should be performed by an authorized service representative. The appliance has no user serviceable parts.
- Switch off the appliance before fitting and removing any attachment.
- Keep your fingers away from moving parts and any openings on the appliance.
- Check that the voltage rating of the appliance matches that of your electrical system. Any connection error will void the warranty.
- Don’t use any attachment and/or appliance if it has been damaged. You should contact an approved service center. Contact the manufacturer at their customer service telephone number for information on examination, repair, or adjustment.
- Do not immerse the appliance, the power cord, or the plug in water or in any other liquid.
- If the power cord or the plug is damaged, do not use the appliance. To avoid any risk, these must be replaced by an approved service center.
- Only use one attachment at a time.
- This appliance shall not be used by children. Keep the appliance and its cord out of the reach of children.
- There is a potential for injury from misuse. Please handle with care.
- Never feed food by hand. Always use the included produce holder.
- Blades are sharp. Handle with care.
Disposal / Recycling:
At the end of its service life, this product may not be disposed of in the
normal household waste, but rather must be disposed of at a collection point
for recycling electrical and electronic devices. The materials are recyclable
according to their labelling. Please ask the municipal administration where
the appropriate disposal facility is located.
PARTS
PRODUCE HOLDER expands after pressing its RELEASE BUTTONS.
HOW TO ASSEMBLE’
NOTE: Please thoroughly clean all non-electrical parts with soap and water
before using the machine for the first time. Use a damp cloth or sponge to
clean the MOTOR BASE. Do not submerge the MOTOR BASE or use running water over
the top to clean the MOTOR BASE.
STEP 1:
Place the MOTOR BASE on top of the LARGE CONTAINER and set it down so it sits
securely and is ready for vegetable spinning action.
STEP 2:
Choose one of four included BLADE ATTACHMENTS to get started making delicious
noodles—Angel Hair, Spaghetti, Ribbon, or Fettuccine. Insert the BLADE
ATTACHMENT of your choice into the CHUTE OPENING at the top of the MOTOR BASE
with the cone pointing down. This piece should fit snugly—yes, it likes to
cuddle.
STEP 3:
Attach the FEEDING CHUTE to the CHUTE OPENING of the MOTOR BASE and lock the
FEEDING CHUTE into place by rotating it clockwise until the arrow is aligned
with the lock . There should be no wiggle room for the FEEDING CHUTE.
STEP 4:
Head over to the next page for instructions on using your Shine Electric
Spiralizer. USING THE ELECTRIC SPIRALIZER
TIPS & TRICKS BEFORE YOU BEGIN:
- The Shine Electric Spiralizer is suitable for processing both soft and hard fruits and egetables, such as carrots, potatoes, beets, zucchini, and cucumbers.
- We recommend cutting your produce to 1–2.3” in diameter and 2.5–7” in length.
CAUTION:
The blades on the BLADE ATTACHMENTS are very sharp, so please handle with
care! STEP
1:
Plug in the Spiralizer to an electrical outlet to prepare for use. STEP
2:
Prepare the vegetable PRODUCE HOLDER to get pushy with your produce by
pressing the RELEASE BUTTONS so the NO-SLIP VEGGIE GRIP on the bottom is ready
for loading your fresh produce. STEP 3:
Insert your fresh produce into the NO-SLIP VEGGIE GRIP at the bottom of the
PRODUCE HOLDER by firmly pushing it onto its hold tight ridges. This way the
PRODUCE HOLDER can do all the work for you!
Note: You may wish to clean or peel your vegetables first. You may need
to trim the sides a bit to ensure the vegetable fits into the holder. NO-
SLIP VEGGIE GRIP
Holds onto your produce to prevent messy slips while feeding your produce into
the rotating blades in the next step. STEP 4:
Turn on the Spiralizer by pressing the ON/OFF SWITCH so the blades spin into
action—get ready for a delicious meal in seconds! STEP 5:
Gently push the PRODUCE HOLDER down into the FEEDING CHUTE and rotating blade,
feeding the produce into the machine— voilà! Noodles! (Be careful not to push
too hard. Let the Spiralizer gently grab the produce as gravity works to help
you!) STEP 6:
Once you have pushed the PRODUCE HOLDER down completely and the RELEASE
BUTTONS have engaged, turn off the Spiralizer. Remove any small produce pieces
from the bottom of the PRODUCE HOLDER and set these aside for other recipes.
STEP 7:
Lift the MOTOR BASE off the LARGE CONTAINER to pull out your fresh noodles!
It’s time to eat!
CLEANING
Always switch off and unplug the Shine Electric Spiralizer before disassembling or cleaning.
- Use a damp cloth or sponge to clean and wipe down the MOTOR BASE after use. Do not submerge the MOTOR BASE in water or use running water over the top to clean the MOTOR BASE.
- Wash and rinse the parts shown below with soap and running water. Then thoroughly dry all parts with a cloth before putting them away for storage.
NOTE:
- Do not use any sharp objects, scouring pads, or other abrasive cleaning agents for cleaning.
- Never immerse the MOTOR BASE in water or other liquids.
- When handling foods with vibrant colors like carrots, the plastic parts of the Shine Electric
Spiralizer may become discolored. In this case, wipe these parts with vegetable oil before washing them to gently remove the stain.
CAUTION:
The blades on the BLADE ATTACHMENTS are very sharp, so please handle with
care!
STORAGE
Your Shine Electric Spiralizer is designed for compact storage in small
spaces! Your entire machine can fit into the footprint of the LARGE CONTAINER
following these steps:
-
Stack all 4 BLADE ATTACHMENTS together to form a tower.
Caution: Avoid contact with the sharp blades. -
Place the stacked BLADE ATTACHMENTS into the LARGE CONTAINER, horizontally laying them down.
-
Put the FEEDING CHUTE upright into the LARGE CONTAINER next to the BLADE ATTACHMENTS.
-
Place the MOTOR BASE on top of the LARGE CONTAINER, over the FEEDING CHUTE.
-
Insert the PRODUCE HOLDER upright into the opening of the MOTOR BASE and through the FEEDING CHUTE.
TROUBLESHOOTING
PROBLEM | SOLUTION |
---|---|
My vegetable is spinning. | Make sure your vegetable is fully attached to the |
NO-SLIP VEGGIE GRIP to prevent spinning while pressing. If your vegetable is
only attached to the pins at the bottom of the PRODUCE HOLDER, it will not
always ensure a tight grip.
My vegetable still has a lot of uncut produce remaining.| Make sure to push
your PRODUCE HOLDER all the way down until the top portion of the PRODUCE
HOLDER clicks into place. This should result in only a very small leftover
piece.
My vegetable did not cut very well.| Some vegetables have a lot of water
content, which generally do better with larger cuts. Try a different BLADE
ATTACHMENT for better results.
My machine is not tuming on.| First, make sure your FEEDING CHUTE is locked
into place by rotating it clockwise until the arrow is aligned with the lock.
Your machine has a safety mechanism, which prevents your machine from tuming
on if the FEEDING CHUTE has not been locked into place Secondly, check the
power outlet and ensure it is working properly. Then toggle the power switch
on. If the machine is still not turning on, wait 10 minutes and repeat these
steps.
Now, if the machine is still not tuming on, please contact our service
department at service@tribest.com and include a
brief explanation of the situation.
My vegetables are not cutting anymore.| If you’ve been frequently using the
same blade attachment or using large amounts of produce, the blade may be
getting dull. It could be time for a replacement! Check out replacement blades
at tribest.com.
My FEEDING CHUTE will not click into place.| Be sure when you are assembling
your unit that the blade attachment is fitted down into place completely. If
they are pushing up, your FEEDING CHUTE will not be able to click into place
properly.
CUSTOMER SUPPORT
In the event that you have any questions concerning the use, care, or service for this product, please feel free to call us or send us an email. If you purchased your product outside of the United States, please refer to your warranty card for your nearest service center.
United States | International |
---|
Shine Kitchen Co. by Tribest
1143 N. Patt St.
Anaheim, CA 92801
Toll-Free: 1-888-254-7336
service@tribest.com| Shine Kitchen Co. by
Tribest
1143 N. Patt St.
Anaheim, CA 92801
Telephone: 1-714-879-7150
service@tribest.com
Shine Kitchen Co. by Tribest
1143 N. Patt St. Anaheim, CA 92801
Toll-Free: 1-888-254-7336 | Tel:
1-714-879-7150
service@tribest.com
tribest.com |
shinekitchen.com
Follow us @tribestlifePlease contact Tribest directly regarding any issues
with your product
before contacting the original retailer you purchased from. Our support
team is more than happy to help you.
© 2021 Shine Kitchen Co. by Tribest V04012021
References
- Shine Kitchen Co. Products | Tribest
- Shop Tribest | USA Official Site | Making Heathy Living Easy | Tribest
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>