DEPSTECH DS580 Industrial Endscope User Manual

Industrial Endoscope
DS580 Multi- Language User Manual

Product Features

• DEPSTECH is a booming technology company, specialzed in creating various endoscopes and commitied to make you feel more secure.
• DS580is a high-performance industrial endoscope, equipped with 5* IPS LCD Screen, has the camera and video functons and saves inlo TF memory card (Micro-SD card). Such camera uses high-performance CMOS. chip thal supports the record-high frame rate o get cear images with Bluart 20 technology, widely usod i industrial maintenance, appliance maintenance, mechanical maintenance & design and other fields.

Special Warning and Notice

• This product s a camera of industria endoscope, not applicable to medical or physical examination!
• In order 1o lengthen the battery life, It recommended that you should charge the device once every 3 months, whether it s used.
• Do not ry to replace internal battery by yourself, because unprofessional operation may lead to isks of personal njry due to battery overhealing, etc.

Safety and Protection

• Probe of camerais an electonic device of igh precision,so please do not hit the probe of camera or pull h cables, wHich may lead fo faiure of the dovice
• With 1P67 waterproof layer, the probe shal ba used withextra care and protected from scratches!
• Probe of camera is made from materils that are not hgh temperature resistan, 5o make suro the interal temperature of any inermal combustion enging o other quipment whose intemal tamperatur s higher has bean cooled when thy are examined, oherise the Gevice il be drclly damagedt!
• In case of Gevice damages, please do not dismanie it by yoursel,but contact the selr or the supplier for more professional mainenance services Chiren may not use this device independenty without the gudance of aduts

Operating and Storage Environments

• The device should be operated at an ambient temperature of 32-113F (0-45C)
• Tho device should be stored in a dry,cloan, oikfree and waterless place. without any chemical iquic.

Product Introduction

1. Power Button
   • Hold this button for 2s to power on/oft the endoscope.

2. • Single press to take a photo
   • Hold this button to start video record, and single press to end the video record.

3. • Click to brighten the LED lights of the camera
   • Move the cursor down (In the menu)

4. • Click to dim the LED lights of the camera
   • Move the cursor up (In the menu)

5. • When previewing the interface, single press this button to rotate the image 180°
   • When previewing the interface, long press this button to switch lens.
   • Return function (after entering the alhbum/settings menu, press this button to return to the previous level of operation interface)

6. • Hold this button for 2s to enter the album
   • Click to confirm choices (In the menu)

7. MENU
   • Click to enter the setting menu

8. Working Status LED Indicator & Charging Status LED Indicator
   • Blue LED Indicator flash: Low battery status
   • Blue LED Indicator on: Working status
   • Red LED indicator flash: Charging status
   • Red LED Indicator on: Charging finished![DEPSTECH DS580 Industrial Endscope

• Product Description 1](https://manuals.plus/wp-content/uploads/2024/01 /DEPSTECH-DS580-Industrial-Endscope-Product-Description-1.jpg)

  9. Aviation Connector
     •  Connect the snake cable camera probe with this interface

  10. TF Card Slot
      •  Support up to 326 TF card
      •  Please format it for the first time of usage

  11. Type-C Charging Port
      •  For charging (Type-C cable connected to the adapter)
      •  For data transmission (Type-C cable connected to PC clent)

  12. Reset Button
      •  Short click the reset button to shut down the device

  13. Fill Light Button
      •  Click to control the external LED fill lights on/off

UI Introduction

Tips:
Dual Lens: AMain Lens B:Side Lens
Three Lens: AMain Lens B:Side Lens(8) C:Side Lens(C)

Language Setting
Default language of the device is English; If other language is required, please follow the steps below:

1. Click the button to enter menu interface, select by pressing the button and then press the button, Enter the language setting interface.
2. Click button to select the language you need, and then press bution to switch the language.

Photo/Video

1. Take photos by pressing button
2. Long press to start video recording, single press to end video recording.

View Photo/Video

1. Long press ok > in preview mode to enter the photo album.
2. Press to view photos, Click Ok t0 play videos.
3. Press to exit the photo album.

Delete Photo/Video

1. When viewing photos/videos, press MENU to enter the photo/video detail page.
2. Press to choose to delete the current file o all files.

Lens Switching
When the product is turned on it default open the main lens, long press to switch the lens.

TF Card Formatting

1. On the preview interface, press the MENU button to enter the menu; -+
2. Press toselect “Format” options;
3. Press to enter the option interface, Select “OK™;
4. Wait for successful formatting.

Copy Photo And Video Files To Computer

1. Use a TF card reader to copy data directly.
2. Use a Type-C cable to connect to computer for copying Setting path.
   1. Please connect the product 10 your computer.
   2. Press the MENU button o enter the men.
   3. Select “Data transission’”
   4 Press the OK button to start copying o computer.

****If the device is not connected with computer, click “Data transmission” on the setup itetace, then USB icon shows up on the ispay: Please press the buton t ext.
It nomaior “No Signal” o appear o the screen when you press the button to xit data transmission.

Charging Instructions

1. Connect the device to the DC 5V adapter for charging;
2. The red indicator light flashes when the device is charging, and is always on when fully charged,

Guide For Accessories Installation
Installation method:

Turn counter clock wise-remove protect cap Turn clockwise-tighten accessories

Specifications

Focal
Range| A Camera| 3-8 cm (1.18-3.15 in)| 3-10 cm (1.18-3.93 in)
B Camera| 2-6 cm (0.79-2.36 in)| 2-6 cm (0.79-2.36 in)
C Camera| /| 1.5-2.5 cm (0.59-0.98 in)
Camera
View| A Camera| 88°| 80°
B Camera
C Camera| /
Photo
Resolution| A Camera| 5 MP| 1080 P
B Camera| 1080 P
C Camera| /
Screen Spec| 5″ IPS LCD Screen
Camera Diameter| 9 mm (0.35 in)| I 7.9 mm (0.31 in)
Video Spec| 1080P/15-30fps
Battery Life| 3-4H
Charging Time| 411
Charging Voltage and current| DC 5V/2A

Packing List

FCC Requirement: Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:
(1) This device may not cause harmful interference, and  (2) This device must accept any interference received, including interference that may cause undesired operation.
Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy, and if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.

CE compliance: This device complies with EN 60065 standard, which means this device will not do harm to the user or products as following situations:

1. Electric shock
2. High temperature
3. Radiation
4. Explosion from inner
5. Mechanical Harm
6. Fire Hazard
7. Chemical burns.

EU Conformity Statement: This product and – if applicable – the supplied accessories too are marked with “CE” and comply therefore with the applicable harmonized European standards listed under the EMC Directive 2014/35/EU, the RoHS Directive 2011/65/EU and Amendment (EU) 2015/863.
WEEE Notice: 2012/19/EU (WEEE directive): Products marked with this symbol cannot be disposed of as unsorted municipal waste in the European Union. For proper recycling, return this product to your local supplier upon the purchase of equivalent new equipment, or dispose of it at designated collection points. For more information see: www.recyclethis.info 
2013/56/EU (battery directive): This product contains a battery that cannot be disposed of as unsorted municipal waste in the European Union. See the product documentation for specific battery information. The battery is marked with this symbol, which may include lettering to indicate cadmium (Cd), lead (Pb), or mercury (Hg). For proper recycling, return the battery to your supplier or to a designated collection point. For more information see: www .recycle-this.info

EC REP: E-CrossStu GmbH. Mainzer Landsir69,60329 Frankiurt am Main
UK REP: DST Co, Ltd. Fiffh Fioor 3 Gower Sireel, London, WOTE 6HA, UK

Customer Services
Please contact us if you have any questions, welove to hear from you

www.depstech.com
support@depstech.com
Facebook Official Page: @DEPSTECH. FANS
Shenzhen Deepsea Innovation Technology Co., Ltd.
Room 1901-1902, Jingizhigu Building,
No.1 Tangling Road, Nanshan District, 518055, Shenzhen, CN
Made in China
V01,22.11

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>