DOG TRACE X30 Gps Tracking System Instruction Manual

June 16, 2024
DOG TRACE

DOG TRACE X30 Gps Tracking System

![DOG-]TRACE-X30-Gps-Tracking-System](https://manuals.plus/wp- content/uploads/2024/01/DOG-TRACE-X30-Gps-Tracking-System.png)

Product Information

Specifications

  • Manufacturer: VNT electronics s.r.o.
  • Compliance: ETSI EN 301 489-1 V1.9.2, ETSI EN 301 489-3 V1.6.1, ETSI EN 300 220-2 V.2.4.1, ETSI EN 60950-1 ed.2:2006 /A1:2010 /A11:2009 /A12:2011 /A2:2014/Cor.1:2012, EN 62479:2010
  • Website: www.dogtrace.com

Product Usage Instructions

Important Notes
If the DOG GPS X30 product is defective, try pairing it with a different phone or tablet.

ECMA
ECMA information is not provided in the user manual.

Introduction

The DOG GPS X30+ has the following features:

  • Sender (Collar)
  • Sender Display
  • Ladekontakte Trainingsmodul (only for GPS X30T/X30TB)
  • Antenna

Description of the Device

The device consists of the following components:

  • Sender (Collar)
  • Sender Anzeigekontrollleuchten (Indicator lights)
  • Ladekontakte Trainingsmodul (Training module with contact points, only for GPS X30T/X30TB)
  • Antenne (Antenna)
  • Display

Button Functions

  • Taste 1: Ein-/Ausschalten von Hintergrundbeleuchtung des Displays (Turn on/off display backlight)
  • Taste 2: Aktivierung der Funktion der Ringzaun (Activation of the fence function)
  • Taste 3: MENU (Einstellung) (Menu settings)
  • Taste 4: Stimulationsimpuls (Stimulation pulse)
  • Taste 5: Digitalen Kompass kalibrieren (Calibrate digital compass)

Display Information

The display shows the following information:

  • (Battery level of the other sender)
  • (Accuracy of GPS position on the sender collar)
  • (Compass – direction to magnetic north)
  • RF-Signals (Active vibration or acoustic indication of received RF signal on a sender)
  • (Active fence function)
  • (Direction indicator to paired sender)
  • (Indication sender)
  • (Number of the other paired sender)
  • (Battery level of the sender)
  • (Occupied transmission channel)

Preparation of the Sender (Collar)

  1. Connect the charger to the power outlet.
  2. Connect the USB cable to the charger.
  3. Connect the charging clip to the USB cable.
  4. Attach the charging clip to the collar.
  5. The orange indicator light on the sender will turn on.

Sender On/Off

  1. To turn on the sender, press and hold buttons 2 and 3 simultaneously.
  2. To turn off the sender, press and hold buttons 2 and 4 simultaneously.

Battery Information
The battery level is indicated by the following symbols:

  • Ladezustand 100%: Battery fully charged
  • Ladezustand 70%: Battery level at 70%
  • Ladezustand 40%: Battery level at 40%
  • Ladezustand 10%: Battery level at 10%

The menu structure is as follows:

  • Chapter 5
  • 8.2
  • 8.6
  • 7.7
  • 9.1
  • 7.6
  • 6.4
  • 7.9
  • 8.7

HF Antennas
After pairing, the display will show the text “HF-Antennen an” (HF antennas on).

FAQ

Q: What should I do if the DOG GPS X30 product is defective?
A: Try pairing it with a different phone or tablet.

References

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>

Related Manuals