DOG TRACE DT510 Electronic Training Collar User Manual

DOG TRACE DT510 Electronic Training Collar

Product Information

The DT510 is a dog training collar designed to assist in training your pet. It comes with a collar receiver, a remote transmitter, and various accessories to ensure effective usage. The collar has important safety features to prevent skin damage and discomfort for your dog. Please read the entire manual before using the product to ensure proper usage and safety.

Important Safety Information

WARNING: The DT510 is not suitable for aggressive dogs or dogs prone to aggressive behavior. Using the product on such dogs can cause severe injury or even death. If you are unsure whether this product is appropriate for your dog, please consult your veterinarian or certified trainer.

CAUTION: Improper usage of the collar can cause skin damage. It is crucial to follow the instructions carefully for proper fit and usage. A loose collar may result in inconsistent performance, while a collar worn for too long or made too tight can cause skin damage. Avoid leaving the collar on your dog for more than 12 hours per day and reposition it on the neck every 1 to 2 hours. Check the fit regularly to prevent excessive pressure and trim any excess strap length if needed. Never connect a lead to the electronic collar as it may cause excessive pressure on the contacts.

It is recommended to wash the dog’s neck area and contacts of the collar weekly with a damp cloth. Additionally, examine the contact area daily for signs of a rash or sore. If any skin issues are detected, discontinue the use of the collar until the skin has fully healed. If the condition persists beyond 48 hours, consult your veterinarian.

While many pets are comfortable wearing stainless steel contacts, some may be sensitive to contact pressure. If your pet shows tolerance to the collar over time, you may relax some precautions. However, it is important to continue daily checks of the contact area. If redness or sores are detected, discontinue use until the skin has fully healed.

Product Usage Instructions

Charging: Before using the product, please ensure that you have charged both the collar receiver and the remote transmitter using the provided USB cable.

Components: The DT510 package includes the following components:

• Collar-receiver
• Remote transmitter
• USB cable
• Contact Points Conductive Silicone Jacket
• Test-light bulb

Key Definitions: Familiarize yourself with the key definitions of the remote transmitter:

• Level Regular
• LED Indicator Digital Color Display
• Beep Tone Adjustable Vibration
• Static Shock
• Type-C Charging Port
• Channel A Channel B Battery Capacity indicator Shock level Antenna
• Channel Select & Static Shock Lock Static Level Vibration Level
• Shock Button: Press this button to issue a shock from the collar receiver.
• Channel Select & Static Shock Lock Button: Press this button to sync the collar-receiver and transmitter via different channels.

Please refer to the user manual for detailed instructions on using the different functions of the remote transmitter and collar-receiver. If you have any queries or require assistance, please contact our customer service.

Important Safety Information

WARNING: NOT FOR AGGRESSIVE DOGS: Do not use this product if your dog is aggressive, or if your dog is prone to aggressive behavior, Aggressive dogs can cause severe injury and even death to their owner and others. If you are unsure whether this product is appropriate for your dog, please consult your veterinarian or certified trainer.

CAUTION: Risk of skin damage: Please read and follow the instructions carefully in this guide, proper fit of the collars is important because a loose collar may cause inconsistent performance. A collar worn for too long or made too tight on the pet’s neck may cause skin damage, ranging from redness to pressure ulcers (commonly known as bedsores). These collars can cause pressure necrosis if used incorrectly and are often misidentified as burns.

• Avoid leaving the collar on the dog for more than 12 hours per day.
• When possible reposition the collar on the pet’s neck every 1 to 2 hours.
• Check the fit to prevent excessive pressure, and it is okay to trim any excess strap length.
• Never connect a lead to the electronic collar because it may cause excessive pressure n the contacts.
• Wash the dog’s neck area and contacts of the collar weekly with a damp cloth.
• Examine the contact area daily for signs of a rash or a sore.
• If a rash or sore is found, discontinue the use of the collar until the skin has healed.
• If the condition persists beyond 48 hours, see your veterinarian.

These steps will help your pet be safe and comfortable. Millions of pets are comfortable while wearing stainless steel contacts. Some pets are sensitive to contact pressure. You may find after some time that your pet is very tolerant of the collar. If so you may relax some of these precautions, it is important to continue daily checks of the contact area. If redness or sores are detected, discontinue use until the skin has fully healed Thank you for choosing our product! You and your pet deserve a companionship that includes memorable moments and a shared understanding together. Our mission is to ensure your pet’s safety by providing you with the tools and techniques to successfully train your pet. Should you have any queries, please contact our customer service.

NOTE : Please charge before using the product.

Components

• DT510-1(1 for 1)
• DT510-2(1 for 2)

Key Definitions

Remote Transmitter

1. LED Indicator:

   • When charging, the LED flashes red, and will turn green when fully charged.
   • In “standby” status, the LED light will flash green every 5 seconds, and will flash red when the battery at low power mode(please charge it ASAP).
   • The LED light will light green when pressing the Tone or Vibration commands on the remote transmitter, and will light red when pressing the Static Shock command.

2. Tone Button:

   • When it is pressed, the collar-receiver will give a warning

3. Vibration Button:

   • When the vibration key is pressed, the neckline receiver will vibrate.

4. Shock Button:

   • When it is pressed, the collar-receiver will issue the shock.

5. Channel Select & Static Shock Lock Button:

   • When it is pressed, you can sync the collar-receiver and the transmitter via different channels (if encoded at the public channel of “A+B”, can control the collar-receiver at any of the channels)
   • Press and hold it for 2 seconds, you can lock/unlock the Static Shock function to avoid the accidental shock.

6. Vibration Level Button:

   • Press and hold the Vibration Level Button B, at the same time, rotating the Level Regulator A of the remote to set the Vibration level of correction you wish to

7. Static Level Button:
   Press and hold the Static Level Button C, at the same time, rotating the Level Regulator A of the remote to set the Static Shock level of correction you wish to administer

8. Digital Color Display:
   Display the channel, intensity, and battery fuel Gauge.

9. Type-c Charging Port:
   For the remote transmitter

Collar receiver

1. Contact Points: Deliver vibration and static shock.
2. ON/OFF/Encde Button:
   • Turn on/off the collar-receiver.
   • Hold it for a few seconds to encode the receiver UNDER THE SHUT POWER OFF STATE.
3. LED Breathing Light ON/OFF Button: Switch on/off linear breath
4. Magnetic Charging Port: For collar-receiver
5. Conductive Silicone Jacket: Avoid injury to the dog’s skin because of the friction of the metal contact point.
6. Linear LED indicator:
   • A : When charging, the linear LED light flashes red; When fully charged, the linear LED light is steady green.
   • B : In “standby “status, the LED light will flash green every 5 seconds, and will flash red when the battery is at low power mode(please charge it asap)
   • C: The linear LED light will light green when receiving Tone/Vibration commands from the remote transmitter, will light red when receiving the Shock command.
   • D: UNDER THE POWER OFF STATE, press and hold the ON/OFF/ENCODE Button for 3 seconds to encode it.
   • E: In “standby” status, press the LED Breathing Light ON/OFF Button to turn the LED breathing light on or off.

Operating Guide

Step 1 Prepare the remote transmitter:
Charge the remote transmitter

1. Connect the charger connector to the charging hole 5V-Output charger only.
2. Plug the charger into a standard
3. If the red indicator of the transmitter light on, it indicates that the transmitter is being charged.
4. Charge the transmitter for at least 3 hours for the first charge or until indication that charging is complete.
5. When charging is complete, the red light will turn green, Also the Battery Capacity Indicator will not flash anymore.
6. When battery capacity “ “Indicator is empty, please charge it asap.

How to use the remote transmitter

1. Press any button to turn on the transmitter. 2. Adjust the vibration/static intensity you need
2. The channel button indicates either channel A, channel B, or channel A+B on the transmitter. Select one channel for use with one collar-receiver, if encoded at the public channel of “A+B”, you can control the collar-receiver
3. If no operation is performed within 60 seconds, the remote transmitter will go into STANDY MODE; If not operated for five minutes, the remote transmitter will go into sleep mode. It can be activated by pressing any function button or the channel button.

Step 2 Prepare the Collar-receiver:
Charge the collar-receiver

1. Connect the charger connector to the charging port (5V-Output charger only).
2. Plug the charger into a standard OUTLET.
3. The red LED light in the collar-receiver will turn (A)
4. Charge the collar-receiver for at least 3 hours for the first charge or until indication that charging is complete.
5. After the receiver has been fully charged, the LED light will turn green. (B)

Step 3 Sync transmitter with collar-receiver:
(You may skip this step because the set is already paired with the factory setting.)

1. Press any button on the transmitter to activate IIT.
2. Select channel AB or A+B.
3. Power off the Receiver Collar by pressing the ON/OFF button on the collar, (a beep power on, two beeps power off).
4. Press the ON/OFF button afresh and hold it for 3 seconds, and then the LED light will start to flash green quickly for 10
5. Now you can hear the first beep from the collar-receiver and then press any of the command button(tone, shock, or vibration) of the transmitter before the green light on the receiver stops flashing
6. You will hear the second beep from the receiver, which signifies that the transmitter and the receiver have been
7. To sync the transmitter and the second receiver, repeat steps 2 through 6.
8. Please be sure to choose the other channel.

NB : According to the factory default settings, when the collar-receiver has been turned on the syncing should be completed within 10 seconds, otherwise you need to repeat steps 2 through 6 again. Please DO NOT try to sync the transmitter with the two collar receivers (if any) at the same time.

Step 4 Test the training system
The following testing methods will help you ascertain whether this training system functions swimmingly. Please make sure that you have connected the transmitter and collar-receiver before testing.

Test the static shock function (Figure 2-1)

1. Place the test light on the contact point of the collar receiver. Turn on the remote transmitter, long press the static shock level button on the right side of the product, and rotate the level regulator above the product to adjust the intensity.
2. Press the shock button and the bulb will flash, signifying that the SHOCK function works. Please make sure the SHOCK level is above 5 when testing the function to see more clearly.

Note : If you want to test the shock function on yourself, please ensure your finger or hand is across both contact points to ensure the connection is complete. Otherwise, the user will feel no stimulation.

Test the vibration functions (Figure 2-2)

1. Open the remote control transmitter, long press the vibration level button on the right side of the product, and rotate the level regulator on the product to adjust the intensity.
2. Press the vibration button on the remote transmitter and the collar-receiver will vibration, signifying the VIBRATION function

Test the Tone function (Figure 2-3)

1. Press the vibration button, and the collar- the receiver will beep, signifying the BEEP

NB:

1. To save power, the transmitter will go into STANDBY mode if there’s no operation in 1 minute; you can press any COMMAND button or the CHANNEL button to activate it and then its screen will display.
2. The collar-receiver will go into SLEEP/POWER SAVING Mode if there is no operation for 2 minutes, the LED stop Will be activated by pressing and holding the command button(shock, vibration, or tone) from the transmitter for 1-2 seconds.

Step 5 Fit the collar-receiver

1. Make sure you have chosen the appropriate length of metal probe for your dog (i.e. long probe for long-haired dogs and short probe for short-haired dogs). (3A)
2. With your dog standing in front of you, place the collar-receiv- er around its neck so the receiver box and probes are on the underside of your dog’s neck, making direct contact with the You may need to trim the fur to ensure good contact. (3B)
3. Fasten the collar-strap. The fit should be sung, but not taut. You should .be able to place one finger beneath the collar-strap around your dog’s neck. (3C)
4. Allow your dog to wear the collar-receiver for several minutes and then check the strap again. As your dog becomes more familiar with the collar-receiver you should ensure the fit is comfy and flattering

Step 6 Regular Maintenance

• Check the metal probes for tightness every week.
• Rinse the metal probes with alcohol every week. (NB: Please turn off the collar-receiver before touching the metal probes.)
• Check your dog’s neck for irritation and wash it every week.

Troubleshooting

My pet is not responding after the pet training system has been installed successfully.

• You need to charge the remote transmitter and the collar- receiver for 2 H separately before initial use.
• Check to see if the remote transmitter and the collar receiver have been turned on.
• Check the intensity levels of vibration and static shock.
• Make sure the collar-receiver has sufficient power to operate.
• Restart the collar-receiver by pressing the ON/OFF button
• Please test the 3 functions (BEEP. VIBRATION, STATIC SHOCK) before initial use. See the “test the training system” part of this guide for testing methods.
• Check whether the collar-receiver has entered into the DEEP SLEEP mode.
• Check if the collar fits snugly with your pet’s neck.
• Check the thickness of your pet’s fur and use appropriate length metal probes. If necessary, please trim your pet’s neck hair so that the metal probes come in direct contact with your pet’s skin.
• If all of the above have been addressed and your pet still gives no response. Please try to reconnect the remote transmitter and the collar-receiver.

The remote transmitter does not work

• Check if the remote transmitter is in low battery status. If the Battery Capacity “ ”Indicator is empty, battery exhaustion is imminent.
• You have to press and hold the power button on the transmitter to turn it on.
• Check if the transmitter has entered into the STANDBY or DEEP SLEEP status.

My collar receiver has worked great for some time, yet it does not work after charging

• First, check if the receiver has been charged correctly. Check the”prepare the collar-receiver” part of the guide for the correct charging method.
• Check if the receiver has been turned on.

I want to test the collar receiver on myself, but it does not work

• When testing the receiver on your hands, please touch the 2 electrodes at the same time as touching one single electrode will not work.

General Training Tips
The following are tips on how to get the best out of your Remote Pet Training Collar:

1. Make the training sessions short and positive (between 10-15 minutes long for each time), which will enable your dog to keep its attention focused on you
2. Tain one dog at a time
3. During initial training sessions, keep your dog in a familiar outdoor environmente.g. an enclosed area of the garden and away from other dogs/animals and people.Training in new locations may cause your dog to become distracted causing you toreinforce your commands with the remote collar-receiver more often collar-receiver more than accordingly.
4. Use a long leash fastened to a non-metallic collar to help his/her learning. Ensure the additional collar and leash does not interfere with the skin contact of the metal probes on the collar receiver. Do not use the remote training collar without a long leash until your dog is fully trained.
5. You will have more success by teaching the dog a command first be fore trying. to reinforce to command with the remote
6. For basic obedience training, VIBRA TION and AUDIO modes are more useful.
7. Issue an obedience command at a time, which will focus your dog’s attention and reduce confusion. Do not use the remote collar to correct commands that have not already been
8. During training, look for all the positive changes in your dog’s behavior and remember to reinforce them promptly with ample praise and reward.
9. Avoid over-correcting your dog. Use as few remote corrections as possible during the training process.
10. When your dog has become apparently perplexed, shift the focus of the training session by drawing his/her attention to a command they are familiar with, e.g. sit. Give your dog praise and encouragement galore on successful completion of the Repeat this several times before returning to training with remotecorrections
11. If you know a particular misbehavior your dog does, then reinvent this situation during a training You will have far more success if you deal withone misbehavior at a time in a controlled situation.
12. Be consistent; give your dog a tone, vibration or static-stim- ulation correction for each misbehavior. When reinforcing a command with a correction. You must do so without emotion and then immediately praise and reward your dog for making the right decision
13. When your dog seems to react in a timid and frightened fashion to either the tone, vibration, or static-stimulation, particularly in early training sessions, do not be flabbergasted. Shift the focus of the training session by dra wing his/her attention to a command they are familiar with. E.G. sit and give your dog abundant praise and encouragement on successful completion of the command.
14. Do not use the Remote Pet Training Collar to correct or eliminate forms of aggression or biting behavior. When your dog is showing signs of aggressive behavior then contact a professional dog trainer in your vicinity
15. Please be reminded that you should keep training sessions short and end every session on a high note. Stop training and play with your dog as soon as he/she has accomplished a new level of proficiency.

SIZE

| NECK GIRTH (IN)| NECK GIRTH (IN)| BACK LENGTH (IN)|

WEIGHT (LBS)

|

BREED

---|---|---|---|---|---
X-SMALL| 7.8-8.6| 9.8-11.8| 7.4| 1-10| Chihuahua,Yorkshire e, terrier
SMALL| 7.8-9.4| 11.4-14.1| 9.0| 11-25| Poodle, Pomeranian
MEDIUM| 9.0-11.0| 13.7-16.5| 11.0| 26-40| Shih Tzu, Maltese Dog

LARGE

|

10.6-12.2

|

16.1-18.5

|

12.2

|

41-70

| Miniature Schnauzer.Pekinge se
LARGE| 11.8-13.3| 18.1-20.8| 13.7| 71-90| English Cocker Spaniel
LARGE| 12.9-14.5| 20.4-23.2| 15.7| 91-110| Beagle
X-LARGE| 16.9-18.9| 29.9-33.0| 23.6| N/A| Husky
X-LARGE| 18.5-20.4| 34.6-38.1| 23.6| N/A| Labrador Retriever

X-LARGE

|

20.4-24.4

|

36.2-39.3

|

27.5

|

N/A

| Golden Retriever Old English Sheepdog

Addendum and Upgrading Notes:

Avoid touching the antenna(at the backside of the LED indicator in the transmitter) or the range may decrease substantially- ly.

COMPLIANCE
FCC Statement (FCC ID: 2ATEO-DT510) This device complies with Part 15 of the FCC Rules. Operation is subject to thefollowing two conditions:

• This device may not cause harmful
• This device must accept any interference received, including interference that may cause undesired operation.

Warning : Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.

• This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment.
• This equipment should be installed and operated with a minimum distance of 0cm between the radiator and your body.

Note : This equipment has been tested and found to comply with the limits for a ClassB digital device, under Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

1. Reorient or relocate the receiving antenna.
2. Ncrease the separation between the equipment and reciever
3. Connect the equipment to an outlet on a circuit different from that to which the receiver is connected.
4. Consult the dealer or an experienced radio/TV technician for help.

LIMITED 90-days WARRANTY
We warrant this product to be free of defects in parts, materials and workmanship for a period of 90 days, from the date of purchase. Should any repairs or servicing under this warranty be required, contact Customer Service by phone or email for instructions on how to pack and ship the product

MADE IN CHINA

Documents / Resources

| DOG TRACE DT510 Electronic Training Collar [pdf] User Manual
2ATEO-DT510, 2ATEODT510, DT510, DT510 Electronic Training Collar, Electronic Training Collar, Training Collar, Collar
---|---

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>