FOXOLA G51 Handheld Industrial Endoscope User Manual

FOXOLA G51 Handheld Industrial Endoscope

PACKAGE CONTENTS

PRODUCT DESCRIPTION

G 51 is a high-performance industrial endoscope camera with 5 inch HD color display. It adopts ergonomic design, which makes it easy to operate.
Self-storage, support for photo and video functions, also the TF card expansion function (up to 64G). This product is equipped with a small diameter HD camera with LED auxiliary lighting. The camera adopts a high-sensitivity chip, which can be used normally even in a dark working environment.

SAFETY AND MAINTENANCE

• The product is an industrial endoscopy camera and is not intended for medical use or human examination.

• Do not hit the camera violently and do not pull the cable.

• When used in an environment with sharp bumps, please use it carefully
  to prevent the waterproof protective layer of the probe from being scratched.

• The camera probe is not made of heat-resistant and high-temperature materials. When checking the automobile engine, please ensure that the temperature in the engine drops to the normal temperature.

• When not in use, please ensure that the lens and the main unit are clean and dry, and avoid contact with oil, etc. or other corrosive and dangerous substances.

• This product is not suitable for people with limited physical, sensory or mental abilities.

• Do not allow children to touch and operate this equipment.

BATTERY INSTRUCTIONS

• Please use a 5V household charger that meets the safety regulations to charge the equipment. Fast charging is not supported.
• This device supports charging while using.
• If the device is not used for a long time, please ensure that it is charged at least once every 3 months to prevent irreparable damage caused by excessive discharge of the battery.

FUNCTION INTRODUCTION

1. Up selection key
   Up/Zoom in / Video playback fast forward key

2. Switch camera
   Cycle switching: cam A — cam B — cam C –cam A

3. Setting key
   Enter / Exit the setting interface

4. MIC
   Recording hole

5. Switch
   Press and hold for 3 seconds to turn on / off

6. Enter
   Confirm selection / Image fixed

7. Down selection key
   Scroll down / Picture rotation / Video playback back key

8. Adjust the light
   Adjust the brightness of the camera LED

9. Mode switching
   Switch between 3 function modes of take photo, video and photo album

10. Taking photos
    Short press to take photos /
    Start recording / End recording

11. Charging interface
    Support USB-C 5V/1A ordinary charging

12. Reset button
    When the product crashes, press it to restart the device

13. TF card slot
    Support to expand 0-64G TF (Micro SD) card

14. Camera connection cable lock switch
    When pressed, insert/pull out the camera connection plug into the snake line socket, and when released, lock the snake line

15. LED torch switch
    Press to turn on the LED torch

16. Camera connection socket
    Connect the camera

17. Flashlight
    Adjustable angle of lamp

18. Speaker
    Video/on/off/prompt sound playback

CAMERA KIT

CAMERA ACCESSORIES

1. Protective cover
   Protect the camera lens, has been installed on the camera

2. Magnet
   Used to magnetically attract metal fragments, parts, etc.

3. Small hook
   Hook for rings, keychains, etc.

4. Sharp hook
   Hook for soft objects such as plastic bags and fruits

5. Big hook
   Hooks large objects such as ropes and cables

PRODUCT SPECIFICATIONS

B: Side 70° C: Side 70°
Camera focal length range| A: Front 20-100mm
B: Side 20-50mm C: Side 20-50mm
Camera LED lights| A: 8 LED lamp beads, 3-level adjustable brightness
B: 1 LED lamp beads, C: 1 LED lamp beads 3-level adjustable brightness
Cable length| 16.4ft(5m) / 10FT(3m) / 3.3FT(1m)
Water proof| IP67
Video resolution| 1280720P
Photo resolution| 19201080P/1280720P
Video format| MP4
Photo format| JPEG
Screen| Screen| 5.0 Inch IPS Screen
---|---|---
Screen resolution| 854480P
Zoom| 1.5X 2.0X
Others| TF card capacity| Support expansion 0-64GB TF (Micro SD) card
Charging port| 5V/1A USB-C port
Battery capacity| 4400mAh Li-battery
Working time| 6 Hours
Battery charging time| 5 Hours
Operating temperature| 13℉ ~ 112℉ (-25℃ ~ 50℃)
Camera temperature| -22℉ ~ 176℉ (-30℃ ~ 80℃)

QUICK TO USE

1. Press and hold the camera cable lock switch butt
2. Insert the cable plug into the cable M socket of the main unit, release the lock switch, and then rotate the thread to fix it
3. Before using this device, you need to insert the TF card
   • Please insert the TF card in the off state
   • Please pay attention to whether the insertion direction and front and back sides of TF card are correct
   • Do not use excessive force when inserting or pulling out the TF card to prevent damage to the card slot structure
4. After connecting the camera, press and hold the power switch button “ ”for 3 seconds to turn it on to start working

OPERATION DETAILS

1. After the device is turned on, the device  defaults to the camera mode, click key to take a photo
   Click the “M” button once to enter the video mode, click key to start recording, and click again to end the recording
   Click the ” M ” button again to enter the view photo/video mode
   The ” M ” key is set as: , three modes are selected cyclically

2. Click ” ” key, you can switch the camera, cycle selection: cam A – cam B – cam C (can only operate in ” “, ” ” two modes)

3. Click the ” ” key to rotate the current screen 180 degrees, click again to restore. (can only operate in ” “, ” ” two modes)

4. Click “ ” key, you can control the intensity  of the camera light, cycle selection: (can only operate in  two modes)

5. Click “ ” key, you can zoom in the screen multiple, cycle selection: 1.0X-1.5X-2.0X (can only operate in two modes

” ” Mode operation instructions:

1. Click the button to view all saved photos and videos, if you need to delete the current photo or video file, click the button to delete
2. The current file is a video file, click the “OK ” button for the play/pause function, click the button for the fast-forward and fast-rewind function+

SETTINGS

1. Click the ” ” button to enter the ”  ” setting mode.
2. Use the keys to move the gray cursor and select the desired menu item.
3. Select the desired item, click the “OK  ” key to enter, use the keys to select the required parameters, and then click the ” ” key to confirm.
4. After the setting is completed, click the key twice to exit the setting mode.

1. Double click button to enter the setting mode.
2. Use the keys to move the gray cursor and select the desired menu item.
3. Select the desired item, click the “OK ” key to enter, use the keys to select the required parameters, and then click the ” ” key to confirm.
4. After the setting is completed, click the button again to exit the setting mode.
5. When using it for the first time, you need to go to  to select the desired language (the factory setting of this device is: English).

COPY PICTURE AND VIDEO FILES

Can use a If card to copy directly, or use a type-c cable to connect to computer for copy

When operating the copy, if the machine is not connected to the computer, please restart the machine or plug and unplug the TYPE-C data line. Do not plug and unplug the TYPE-C data cable during the data transmission process, which will cause the data transmission to fail.

CHARGING GUIDE Charging Guide

• Connect the device to the TYPE-C USB adapter for charging(5V 1A/5V 2A). The product does not support fast charging.
• During the charging process, the power symbol indicates that the charging is in progress；
• When the device is fully charged, the power display shows the full state

FAQ

1. The product does not output a picture or the screen turns black
   Remove the flexible conduit joint, reassemble and tighten it, or restart the device.

2. Lags happened during the photo outputting of the product
   Please check whether the product has sufficient power, or restart the device, or reassemble the flexible conduit.

3. Product crash
   Please press the reset button on the back of the device, restart the device.

4. Imaging screen is not clear
   The best imaging focal length of the product is: 2cm-10cm, please calibrate the distance to the object, or clean the front of the camera with a clean alcohol cloth.

5. Product charging
   Please use (5V 1A/5V 2A) charger to charge the device. The product does not support fast charging.

6. The camera is heat
   It is normal for the camera to heat up, especially when the camera LED light is on at the highest brightness. But it does not affect normal use or service life.

7. TF card can not be recognized
   Please confirm whether the TF format is FTA32 . If not, please format it and do not recognize it. Please plug and unplug the TF card again； The device supports Class 10 high-speed memory cards and does not support Class 4 low- speed memory cards

FCC statement

Any changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.

This device complies with part 15 of the FCC Rules.

Operation is subject to the following two conditions:

1. This device may not cause harmful interference，
2. This device must accept any interference received, including interference that may cause undesired operation.

FCC Radiation Exposure Statement

This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment.

WEEE Compliance
Correct Disposal of This Product (Waste Electrical & Electronic Equipment)
(Applicable in countries with separate collection systems)
This marking on the product, accessories or literature indicates that the product and its electronic accessories should not be disposed of with other household waste at the end of their working life.
To prevent possible harm to the environment or human ,health from uncontrolled waste disposal, please separate these items from other types of waste and recycle them responsibly to promote the sustainable reuse of material resources.
Household users should contact either the retailer where they purchased this product, or their local government office, for details of where and how they can take these items for environmentally safe recycling.
Business users should contact their supplier and check the terms and conditions of the purchase contract.
This product and its electronic accessories should not be mixed with other commercial wastes for disposal.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>