NETGEAR MR6450 M6 Pro 5G WiFi 6E Mobile Router User Guide

NETGEAR MR6450 M6 Pro 5G WiFi 6E Mobile Router User Guide

Before setting up your mobile router, note that it requires a nano SIM card to connect to your mobile provider’s network. To get a valid and provisioned nano SIM card, contact your mobile provider. For information about contacting mobile providers and information you might need to provide your mobile provider, use the QR code or visit https://www.netgear.com/mobile-setup.

To download the user manual, scan the QR code or visit http://www.netgear.com/m6usermanual.

Get to know your mobile router

What’s in the box

• Nighthawk® M6 Pro 5G Mobile Router
• Battery cover
• Battery
• USB Type C cable
• AC adapter

Install the SIM and battery

Do not use a tool, pen, or paperclip to insert or remove the nano SIM card. Doing so might cause damage to your mobile router that is not covered by the warranty.

1. Verify the SIM orientation as shown on the product label.

2. Gently insert the nano SIM card.
   The nano SIM card must have an active data plan with your operator.

3. Insert the battery.

4. Install the back cover.

5. To charge the battery, connect the USB cable to the mobile router and then plug it into either:

   • A wall socket, using the AC adapter (faster charge option).
   • A USB port on your laptop

Set up your mobile router

1. Press and hold the Power button for 2 seconds.
   
   To better safeguard your network, the first time you turn on your mobile router, you are asked to set up your login credentials.

2. Follow the onscreen instructions to customize your mobile router settings.
   

LCD home screen

The home screen displays your mobile router WiFi network name and password, and the mobile network signal strength and connection type.

Use the battery or AC power

This mobile router can operate on battery when you’re away from your home or the office. The Power Manager settings allow you to further optimize battery life.

This mobile router can also operate without a battery using the supplied AC adapter. For extended periods on AC power, we recommend removing the battery to extend the battery life.

Connect to the Internet

The mobile router LCD screen goes dark to save power. A quick press and release of the Power button wakes the screen.

QR code connect from a smartphone

1. Tap the QR code icon on the mobile router’s LCD home screen.
   
   A QR code displays.

2. Point your phone’s camera to the QR code.
   Your phone connects to the mobile router WiFi network.

On your laptop or other WiFi-capable device

1. Open your WiFi network manager.
2. Find your mobile router’s WiFi network name (NTGR_XXXX) and connect.
3. Enter your mobile router’s WiFi password.

Note: To reduce power consumption and extend the battery life, this mobile router by default has Ethernet disabled. You can go to Power Manager to change to custom profile settings.

LCD WiFi Manager

You can manage the WiFi network and change the WiFi settings from the LCD screen.

Change the WiFi network name and password

1. On the home screen, tap the WiFi tile.

2. Tap WiFi Info to see name and password.

3. Tap WiFi Name, enter your changes, and tap Done.

4. Tap WiFi Password, enter your changes, and tap Done.

If your device is not connecting to this mobile router, we suggest enabling DualBand (2.4 & 5 GHz) in WiFi Band settings.

Note: To reduce power consumption and extend the battery life, this mobile router is default set to the WiFi 5 GHz Only band.

LCD Settings

View or change the settings

On the home screen, tap the Settings tile.

From the Settings page, tap any of the menus to view or change the settings. Tap More to view additional information and settings.

Web Admin Portal

You can use a web browser to view and change more advanced mobile router settings.

Log In

1. To find the URL for the Web Admin Portal, on your mobile router, tap Settings > More > Device Information. The URL displays. It is either http://mywebui.net or http://192.168.1.1
2. On a WiFi-capable device that is connected to your mobile router, type the URL in the browser bar.
3. Log in as administrator.
   

Note: The default administrator login is printed on the mobile router label, which is inside the battery compartment.

Support and Community

From the Web Admin Portal home page, click the three-dot icon in the upper- right corner to access help and support files.

For additional information, visit netgear.com/support to access the user manual and to download firmware updates.

You can also check out our NETGEAR Community for helpful advice at community.netgear.com.

Regulatory and Legal

For regulatory compliance information, visit https://www.netgear.com/about/regulatory/.

See the regulatory compliance document before connecting the power supply.

Manage settings using the NETGEAR Mobile app

Use the NETGEAR Mobile app to change your WiFi network name and password. You can also use it to play and share media, and access advanced mobile router features.

1. Make sure your mobile device is connected to the Internet.
2. To download the NETGEAR Mobile app, scan the QR code below. The QR code connects you to the Apple Store or Google Play Store, depending on your mobile device.
   

Support

NETGEAR, Inc.
350 East Plumeria Drive
San Jose, CA 95134, USA
© NETGEAR, Inc., NETGEAR and the NETGEAR Logo are trademarks of NETGEAR, Inc. Any non‑NETGEAR trademarks are used for reference purposes only.

References

• English - NETGEAR Communities
• Mobile Login | Services | Home | NETGEAR
• NETGEAR Support | NETGEAR
• netgear.com/m6usermanual

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>