Klipsch XCORE100 Soundbar User Manual

: June 16, 2024
: Klipsch

Klipsch XCORE100 Soundbar User Manual

KLIPSCH CONNECT APP

APPLICATION KLIPSCH CONNECT • APLICACIÓN KLIPSCH CONNECT • KLIPSCH CONNECT APP • APP KLIPSCH CONNECT • APLICATIVO KLIPSCH CONNECT KLIPSCH CONNECT应用 • KLIPSCH CONNECTア

Download the Klipsch Connect app
Follow the instructions

ADD TO YOUR SYSTEFlexus Sound System is built to grow with you. Add up to

two wireless subwoofers and wireless surround speakers to create a home theater. For more information, please visit:

IMPORTANT SAFETY INSTRUCTIONS

Read these instructions
Keep these instructions
Heed all warnings
Follow all instructions
Do not use this apparatus near water
Clean only with dry cloth.
Do not block any ventilation openings. Install in accordance with the manufacture’s instructions.
Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus (including amplifiers) that produce heat.
Do not defeat the safety purpose of the polarized or grounding plug. A polarized plug has two blades with one wider than the other. A grounding plug has two blades and a third grounding prong. The wide blade or the third prong is provided for your safety. If the provided plug does not fit into your outlet, consult an electrician for replacement of the obsolete outlet.
Protect the power cord from being walked on or pinched particularly at the plugs, convenience receptacles, and at the point where they exit from the apparatus.
Only use attachments/accessories specified by the manufacturer.
Use only with the cart, stand, tripod, bracket, or table specified by the manufacturer, or sold with the apparatus. When a cart or rack is used, use caution when moving the cart/apparatus combination to avoid injury from tip-over.
Unplug the apparatus during lightning storms or when unused for long periods of time. Refer all servicing to qualified personnel. Servicing is required when the apparatus has been damaged in any way, such as power supply cord or plug is damaged, liquid has been spilled or objects have fallen into the apparatus has been exposed to rain or moisture, does not operate normally, or has been dropped.

FCC AND CANADA EMC COMPLIANCE INFORMATION
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:

This device may not cause harmful interference, and (2) This device must accept any
interference received, including interference that may cause undesired operation.

Any Changes or modifi cations not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

Reorient or relocate the receiving antenna.
Increase the separation between the equipment and receiver.
Connect the equipment into an outlet on a circuit diff erent from that to which the receiver is connected.
Consult the dealer or an experienced radio/TV technician for help.

FCC RF Radiation Exposure Statement

This equipment complies with FCC RF radiation exposure limits set forth for an uncontrolled environment.
This transmitter must not be colocated or operating in conjunction with any other antenna or transmitter.
This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance 20cm between the radiator & your body.

CE RF Radiation Exposure Statement
This device can be operated in at least one Member State without infringing applicable requirements on the use of radio spectrum.
This equipment complies with EU radiation exposure limits set forth for an uncontrolled environment.
This equipment should be installed and operated with minimum distance 20 cm between

the radiator and your body. This device complies with Industry Canada’s licence-exempt RSSs. Operation is subject to

the following two conditions:

This device may not cause interference; and
This device must accept any interference, including interference that may cause undesired

operation of the device
Radio Frequency (RF) Exposure Information
The radiated output power of the Wireless Device is below the Industry Canada (IC) radio
frequency exposure limits. The Wireless Device should be used in such a manner such that
the potential for human contact during normal operation is minimized.
This device has also been evaluated and shown compliant with the IC RF Exposure limits
under mobile exposure conditions. (antennas are greater than 20cm from a person’s body).

for each off mode, standby mode (or another condition which does not exceed the applicable
power consumption requirements for off mode or standby mode) and networked standby into
which the equipment is switched by the power management function or similar function:

the power consumption expressed in watts rounded to the first decimal place;
the period after which the equipment reaches automatically standby mode, off mode or
networked standby in minutes and rounded to the nearest minute;

DC OUT 1 ———USB Type-C(5V/2.0A)
DC OUT 2———-USB Type-A(connect with Flexus Transport 100) ,data transmission

INSIDE

CONTENU

**Sound Bar

Remote

Wall Mount Brackets (2)

Wall Mount Screws (2)

Power Cord

HDMI Cable
**

SOUND BAR CONTROLS

BARRE DE SON

DIRECT WALL MOUNTING

CONNECTING TO POWER

CONNECTING WIRED SUBWOOFER

LED ON/OFF

REMOTE

On/Off
LEDs High/Low
Source Select Selects HOMI PARC Input
Play/Pause
Source Select Selects Optical Input
Bluetooth Source Select Long press to enter Bluetooth pairing mode
Surround Level
Adjusts channel levels. FH-Front Height If surrounds present
SL- Side Left Surround
SR- Side Right Surround
Bass Level
Adjusts Bass equalizer value. Use [Vol+] and [Vol-1 to adjust.

Increase Volume
Mute
Decrease Volume

Sound Mode
Cycles through available Sound Modes. Movie (default) is highly
Dialog Boost
Toggles through Off, Low, Medium, High
Night Mode
Enables/disables Night Mode.

Advanced Functionality

Long Press): Displays decoding mode.
(Long Press): Sets Dialog Boost to OFF.
(Long Press) : Exits Surround adjust mode.
(Long Press) : Enters remote pairing mode

CONNECTIONS – HDMI eARC

CONNECTIONS – DIGITAL OPTICAL

CONNECTIONS – EXTERNAL HDMI SOURCE THROUGH TV

CONNECTIONS – EXTERNAL AUDIO VIA DIGITAL OPTICAL

Use this connection method when connecting audio sources with a digital optical output, such as CD Players, PC audio servers, or streaming audio players.
Note : Digital connection only supports Dolby Audio-Dolby Digtial Decoding, not Dolby Atmos.

TURN OFF TV SPEAKERS

ADJUSTING BASS LEVEL

SURROUND LEVEL ADJUSTMENT

NIGHT MODE

DIALOGUE MODE

FACTORY RESET

Clears Bluetooth ® pairing history and user programmed IR commands

DECODING AND PLAYBACK MODES

INCOMING DIGITAL AUDIO SIGNALS THE FLEXUS CORE 200 WILL DECODE	PCM

LPCM Up to 8 Channels
Dolby Audio-Dolby Digital (2.0, 5.1, Etc.)
Dolby Audio-Dolby Digital Plus (2.0, 5.1, 7.1, Etc.)
Dolby TrueHD
Dolby Atmos

Flexus Core 200 comes equipped with several user selectable playback modes. Depending on which playback mode the user has selected, the system will decode the surround sound signal. The following chart shows which playback modes will result in which type of surround sound from the system, along with the recommended uses for each mode.

USER SELECTED INPUT MODE| OUTPUT FORMAT| RECOMMENDED FOR:
---|---|---
MOVIE (DEFAULT)| Dolby Atmos mixed to 5.1.4| The most immersive and complete system tuning for everyday use. Perfect for shows and movies, Movie mode upmixes all signals into all available channels and virtualizes a wide soundstage. Movie mode boosts surround effects and increases dialog clarity.
MUSIC| Dolby Atmos mixed to 5.1.4| Optimized to keep music sounding like the artist intended, Music mode disables virtualization, dialog enhancement, and boosted surround experience while maintaining upmixing stereo sourcesto all available channels.

LED DISPLAY

| DISPLAY| BAR STATUS
---|---|---

INPUTS

| BT| Bluetooth Input Selected
DIGITAL| Digital (Optical) input Selected
TV| HDMI-eARC input Selected
USB| USB Thumb Drive Input
SOUND MODES| MOVIE (Default)| Movie Mode ON
MUSIC| Music Mode ON
DIALOG MODE| DLG OFF| Dialog Boost Off
DLG LOW| Dialog Boost Low
DLG MED| Dialog Boost Medium
DLG HIGH| Dialog Boost High
NIGHT MODE| NGT OFF| Night Mode OFF
NGT ON| Night Mode ON
| DISPLAY| BAR STATUS
---|---|---
LEVEL ADJUST| [SOURCE] XX| System Volume Setting [0] – [50]
MUTE| System Muted / Volume Set To Minimum
[SOURCE] MAX| System Volume Set To Max
BASS [XX]| Bass equalizer volume [-6] – [+6]
CEC TOGGLE| CEC [XXX]| CEC Protocol Turned [On] or [Off]