MeTra 107-TO7HG Dash Kit Instruction Manual

: June 16, 2024
: Metra

Table of Contents

107-TO7HG Dash Kit
KIT FEATURES
KIT COMPONENTS
DASH DISASSEMBLY
KIT ASSEMBLY
References
Read User Manual Online (PDF format)
Download This Manual (PDF format)

107-TO7HG Dash Kit

MeTra 107 TO7HG Dash Kit 107-TO7HG
INSTALLATION INSTRUCTIONS
Patent Pending MeTra 107-TO7HG Dash Kit - fig

Toyota Highlander (Without factory 12.3 inch screen) 2020
Visit MetraOnline.com for more detailed information about the product and up- to-date vehicle specific applications

KIT FEATURES

ISO DDIN radio provision*
Painted gloss black
This kit is designed for an ISO DDIN radio which have an “L” shaped chassis design, with the radio chassis at the bottom of the screen, or Pioneer modular 6.8” radios.
† Refer to the radio manufacturer for current models

KIT COMPONENTS

A) Radio trim panel
B) Screen brackets
C) Radio chassis brackets

MeTra 107-TO7HG Dash Kit - pats

WIRING & ANTENNA CONNECTIONS (sold separately)
Wiring Harness: 70-1765 non-amplified
See metra-online.com or axxessinterfaces.com
for audio and SWC interface options
Antenna Adapter: 40-LX11

TOOLS REQUIRED

Panel removal tool
10mm socket
Phillips screwdriver

Attention! Let the vehicle sit with the key out of the ignition for a few minutes before removing the factory radio. When testing the aftermarket equipment, ensure that all factory equipment is connected before cycling the key to ignition.

DASH DISASSEMBLY

Unclip and remove the trim behind the radio. Remove (4) 10mm screws exposed. (Figure A)
Unclip, unplug, and remove the radio and panel. (Figure B)
Remove (4) Phillips screws securing the factory radio to the dash panel. (Figure C)
Continue to Kit Assembly

KIT ASSEMBLY

Bottom chassis radio provision

Secure the radio brackets to the radio using screws supplied with the radio. (Figure A)
Slide the radio assembly into to the dash and secure using the factory screws.
Secure the radio trim panel into the factory dash panel.
Locate the factory wiring harness and antenna connector in the dash and complete all necessary connections to the radio. Metra recommends using the proper mating adapter from Metra and/or Axxess. Test the radio for proper operation.
Reassemble the dash in reverse order of disassembly to complete the installation.

Pioneer Modular DDIN radio provision
Note: For steps 1 and 2, reference the installation manual provided with the radio for which hardware to use. The display screen and radio chassis use two different types of screws.

Secure the radio brackets to the radio chassis using (4) screws supplied with the radio. (Figure A)
Slide the radio chassis into to the dash, then secure using the factory screws.
Secure the radio display to the screen brackets using (6) screws supplied with the radio. (Figure B)
Place the radio trim panel into to the factory dash panel, then the radio screen assembly, and secure using the factory screws. (Figure C)
Locate the factory wiring harness and antenna connector in the dash and complete all necessary connections to the radio. Metra recommends using the proper mating adapter from Metra and/or Axxess. Test the radio for proper operation.
Connect the radio display to the radio chassis.
Reassemble the dash in reverse order of disassembly to complete the installation.

Having difficulties? We’re here to help.
Contact our Tech Support line at: 386-257-1187
Or via email at: techsupport@metra-autosound.com
Tech Support Hours (Eastern Standard Time)
Monday – Friday: 9:00 AM – 7:00 PM
Saturday: 10:00 AM – 7:00 PM
Sunday: 10:00 AM – 4:00 PM

KNOWLEDGE IS POWER
Enhance your installation and fabrication skills by enrolling in the most recognized and respected mobile electronics school in our industry.
Log onto www.installerinstitute.com or call 800-354-6782 for more information and take steps toward a better tomorrow.
Metra recommends MECP certified technicians