QualGear QG-TM-001 TV Wall Mount User Guide

QualGear QG-TM-001 TV Wall Mount

Product Information

QualGear TV Wall Mount (QG-TM-001)
The QualGear TV Wall Mount (Model Number QG-TM-001) is a versatile product that can accommodate most TVs and monitors with some basic specifications.

TV Compatibility Check
Before you buy or install this product, please make sure that your TV or monitor meets the following requirements:

• Compatible with VESA standard
• Proper weight capacity

VESA Standard
VESA (Video Electronics Standards Association) is a standard that defines the distance between the mounting holes on the back of your TV or monitor. It is measured in millimetres (mm).

Weight Capacity
The QualGear TV Wall Mount QG-TM-001 can support TVs or monitors with a weight capacity of up to [insert weight capacity]. Please ensure that your TV or monitor does not exceed this weight limit.

Note:
If you want to install your TV or monitor on wooden studs, but it has a different VESA than the ones supported by QualGear TV Wall Mount QG-TM-001, some customers have used toggle bolts to attach their TVs or monitors to the drywall (each toggle bolt must support at least 3 times the weight of your TV or monitor).

Disclaimer:
QualGear does not recommend or endorse installing your TV or monitor on drywall, as we have not tested it. Therefore, QualGear is not responsible for any damage to your TV or monitor or property, personal injury, or death.

Product Usage Instructions

Installation

1. Identify a suitable location on your wall for mounting the TV.
2. Ensure that the wall is capable of supporting the weight of your TV and the wall mount.
3. Use a stud finder to locate the wooden studs in the wall. Alternatively, use toggle bolts if your TV has a different VESA standard than supported by the QualGear TV Wall Mount QG-TM-001 (ensure each toggle bolt supports at least 3 times the weight of your TV or monitor).
4. Attach the wall plate to the wall using appropriate screws or bolts. Ensure that the wall plate is securely fastened to the wooden studs or toggle bolts.
5. Attach the brackets to the back of your TV or monitor using the provided screws or bolts. Make sure they are securely fastened.
6. Lift the TV or monitor and align the brackets with the wall plate. Slide the TV or monitor onto the wall plate, ensuring a secure fit.
7. Double-check that the TV or monitor is properly mounted and secure.

Adjustment and Viewing
After installing your TV with the QualGear TV Wall Mount QG-TM-001, you can make adjustments to optimize your viewing experience:

• Tilt: The mount allows you to tilt the TV up or down to achieve the desired viewing angle. Adjust the tilt by loosening the tilt adjustment screws, tilting the TV, and tightening the screws.
• Swivel: Some models of the QualGear TV Wall Mount QG-TM-001 allow for swivel functionality, allowing you to rotate the TV horizontally. Adjust the swivel angle by loosening the swivel adjustment screws, rotating the TV, and tightening the screws.
• Level: Ensure that your TV is level by using a bubble level or adjusting the mount accordingly.

Specifications

• Model Number: QG-TM-001
• Weight Capacity: [insert weight capacity]
• VESA Compatibility: [insert supported VESA standards]

FAQ

Question: What is VESA?
Answer: VESA is a standard that defines the distance between the mounting holes on the back of your TV or monitor. It is measured in millimetres (mm). You can find out the VESA of your TV or monitor by looking at the manual or measuring the horizontal and vertical distance between the holes.

Question: I want to install my TV on the wooden studs, but the VESA of my TV is not compatible with QualGear TV Wall Mount QG-TM-001; what can I do?
Answer: If you want to install your TV or monitor on wooden studs but it has a different VESA than the ones supported by QualGear TV Wall Mount QG- TM-001, some customers have used toggle bolts to attach their TVs or monitors to the drywall (each toggle bolt must support at least 3 times the weight of your TV or monitor).

Disclaimer:
QualGear does not recommend or endorse installing your TV or monitor on drywall, as we have not tested it. Therefore, QualGear is not responsible for any damage to your TV or monitor or property, personal injury, or death.

TV Compatibility Check

QualGear TV Wall Mount (Model Number QG-TM-001) is a versatile product that can accommodate most TVs and monitors with some basic specifications. Before you buy or install this product, please make sure that your TV or monitor meets the following requirements:

• Your TV or monitor weighs 110 lbs (50 kgs) or less.
• The VESA (mounting hole pattern) of your TV or monitor is within the range below:
  • Concrete or Brick Wall – 100 x 100, 200 x 200, 400 x 400, 600 x 600, 800 x 800
  • Wooden Studs – 400 x 400, 600 x 600, 800 x 800
  • Drywall (Using Toggle Bolts) – 100 x 100, 200 x 200, 400 x 400, 600 x 600, 800 x 800 [Not tested by QualGear. See the Note and Disclaimer below.]

Note:
If you want to install your TV or monitor on wooden studs, but it has a different VESA than the ones supported by QualGear TV Wall Mount QG-TM-001, some customers have used toggle bolts to attach their TVs or monitors to the drywall (each toggle bolt must support at least 3 times the weight of your TV or monitor).

Disclaimer:
QualGear does not recommend or endorse installing your TV or monitor on drywall, as we have not tested it. Therefore, QualGear is not responsible for any damage to your TV or monitor or property, personal injury, or death.

FAQ

Question: What is VESA?

Answer:
VESA is a standard that defines the distance between the mounting holes on the back of your TV or monitor. It is measured in millimetres (mm). You can find out the VESA of your TV or monitor by looking at the manual or measuring the horizontal and vertical distance between the holes.

Question: I want to install my TV on the wooden studs, but the VESA of my TV is not compatible with QualGear TV Wall Mount QG-TM-001; what can I do?

Answer:
If you want to install your TV or monitor on wooden studs but it has a different VESA than the ones supported by QualGear TV Wall Mount QG-TM-001, some customers have used toggle bolts to attach their TVs or monitors to the drywall (each toggle bolt must support at least 3 times the weight of your TV or monitor).

Disclaimer:
QualGear does not recommend or endorse installing your TV or monitor on drywall, as we have not tested it. Therefore, QualGear is not responsible for any damage to your TV or monitor or property, personal injury, or death.

DIMENSION

• TV SIZE
  This mount supports most 37 to 70-inch TVs

• MAX. WEIGHT
  This mount supports TVs weighing up to 110 lbs

MOUNTING HOLE PATTERN

• Concrete or Brick Wall – 100 x 100, 200 x 200, 400 x 400, 600 x 600, 800 x 800
• Wooden Studs – 400 × 400, 600 × 600, 800 × 800
• Drywall (Using Toggle Bolts) – 100 × 100, 200 × 200, 400 x 400, 600 x 600, 800 x 800 [Not tested by QualGear. See the Note and Disclaimer]

Note:
If you want to install your TV or monitor on wooden studs, but it has a different VESA than the ones supported by QualGear TV Wall Mount QG-TM-001, some customers have used toggle bolts to attach their TVs or monitors to the drywall (each toggle bolt must support at least 3 times the weight of your TV or monitor).

Disclaimer:
QualGear does not recommend or endorse installing your TV or monitor on drywall, as we have not tested it. Therefore, QualGear is not responsible for any damage to your TV or monitor or property, personal injury, or death.

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>