TESLA IR302BL Steam Iron User Manual

: June 5, 2024
: Tesla

Table of Contents

SAFETY INSTRUCTIONS
COMPONENT NAME
CLEANING AND MAINTENANCE
SPECIFICATIONS
References
Read User Manual Online (PDF format)
Download This Manual (PDF format)

IR302BL Steam Iron
User Manual TESLA IR302BL Steam Iron

Household Use only. Read this instruction manual carefully before using it.

The appliance is intended for use by persons with disposing capacity, experiences, and common sense. For those persons who lack of guarantee safety, they must be supervised by their custodians to use the appliance. Children should be supervised to ensure that they do not play with the appliance.
The iron must not be left unattended while it is connected to the supply mains
The iron must be used and rested on a stable surface
When placing the iron on its stand, ensure that the surface on which the stand is placed stably.
The iron is not to be used if it has been dropped if there are visible signs of damage or if it is leaking.
The plug must be removed from the socket outlet before the water reservoir is filled with water(for steam irons and irons incorporating means for spray water)

SAFETY INSTRUCTIONS

Before using it for the first time, please check if the voltage rating on the type plate corresponds to the main voltage in your home.
Make sure to unplug the appliance from the socket when leaving the iron even for a short while, and stand the iron on its end. Please leave the iron away from the touch of children.
The iron will be of high temperature when used, never touch it with a hand or close to the flammable product in order to avoid an accident.
Caution: Unplug the appliance from the socket before filling the iron with water.
Never immerse the iron in water or other liquid.
Please send the iron to our special repair agent for repair if any damage to the cord.
Deposit or Mineral in the water will lead to generating the scales and block the seam hole, therefore it is advisable to use distilled water.
Do not use chemically descaled water
The ejected steam is hot and therefore hazardous. Never direct the steam towards people.
The iron must be used and rested on a stable surface
When placing the iron on its stand, ensure that the surface on which the stand is placed is stable.
Do not pull or carry by cord, use cord as a handle, close a door on the cord, or pull cord around sharp edges or corners, Keep cord away from heated surfaces
The iron is not to be used if it has been dropped, if there are visible signs of damage or if it is leaking

CAUTIONS OF THE FIRST USE

There is little liquid in the iron due to testing, the iron may slightly release steam when first turned on. After a short time, this will stop.
Before using it for the first time, remove any sticker or protective foil from the soleplate. Clean the soleplate with a soft cloth.
Keep the soleplate smooth: avoid hard contact with metal objects.

COMPONENT NAME

A Soleplate
B Water spray nozzle
C Water tank
D Water refill lid
E Spray button
F Steam button
G Handle| H Flexible cord protector
I Rear cover
J Power indicator light
K Self-Cleaning button
L Steam adjustment knob
M Temperature adjustment knob
---|---

**Filling with Water:**
Make sure the iron is unplugged and the thermostat dial is in the MIN position. Place iron on the heel rest, tilt forward at approximately 45 angles,s and pour water into the water-filling opening to the MAX position of the water tank.
**Vertical Steam**
” Burst of Steam” can also be applied when holding the iron in a vertical position, this is useful for removing creases from hanging clothes, curtains, etc.
Dry Ironing

Set the steam selector to position O(=No Steam)
As per the washing label of various clothes, set the correct ironing temperature to begin ironing.

Steam Ironing:

Fill water in the iron as per the water-filling methods.
Plug the appliance into the socket.
If the only set thermostat knob is to MAX position as per the temperature indicator, steam iron will be available, otherwise, water may leak from the soleplate.
It indicates that the temperature has been ready until the indicator light goes off.
Set the steam selector correctly, increase steam output by pushing the steam selector back and decrease the steam output by forwarding.

CAUTION!
Synthetic Fabric, Nylon, Synthetic Silk, and Silk cannot use steam iron, otherwise, it will damage the finish of the surface.
Burst of Steam
This function works well for tough wrinkles and heavy fabrics. By pressing the “Burst of Steam” button, an intense burst of steam is emitted from the soleplate, this can be very useful when removing stubborn creases. The shot of the steam facility can be used only while ironing at a high ironing temperature. For optimal result, there should be 5 seconds rest between the presses of the steam button. To prevent leaking water from the soleplate do not press the steam button continuously for more than 5 seconds. Also, allow at least a one-minute interval before applying this burst of steam function.
Spraying Methods:
At any temperature by pressing the spray button a couple of times, the laundry can be damped down. Ensure that there is enough water in the water tank.
**Self-Cleaning**
Use the self-cleaning function once every two weeks. If the water in your area is very hard(i.e, when flakes come out of the soleplate during ironing), the self-cleaning function should be used more frequently.). Make sure the appliance is unplugged, set the steam selector to position “O”, fill the water tank to the MAX position, do not put vinegar or other dealing agents in the water tank., select the maximum ironing temperature, put the plug in the wall socket, unplug the iron when the power indicator light has gone out, hold the iron over the sink, press and hold the self-cleaning button and gently shake the iron to and fro. Steam and boiling water will come out of the soleplate, and impurities and flakes(if any), will be flushed out. Release the self- cleaning button as soon as all the water in the tank has been used up. Repeat the self-cleaning process if the iron still contains a lot of impurities. After the self-cleaning process, put the plug in the wall socket and let the iron heat up to allow the soleplate to dry, unplug the iron when it has reached the set ironing temperature, and move the hot iron gently over a piece of used cloth to remove any water stains that may have formed on the soleplate, let the iron cool down before you store it.
**ANTI-DRIP**

Anti-drip system is designed to prevent water from escaping from the soleplate when the iron is too cold automatically.
During use, the anti-drip system may emit a loud clicking sound, particularly during heat-up or whilst cooling down. This is perfectly normal and indicates that the system is functioning correctly.

**ANTI-SCALE**
The build-in anti-scale cartridge is designed to reduce the build-up of limescale which occurs during steam ironing. This will prolong the working life of your iron. However, please note that the anti-scale cartridge will not completely stop the natural process of limescale build-up.
**Temperature and steam settings table**

Caution: This indicates that the fabric is not ironing

CLEANING AND MAINTENANCE

Before cleaning, remove the plug from the socket and allow the iron to cool down sufficiently.

Wipe off the soleplate with a damp cloth and a non-abrasive (liquid) cleaner.
If the fiber adheres to the soleplate, use a damp cloth with vinegar to wipe off the soleplate.
Never use strong acid or alkali in order to avoid damaging the soleplate.
If the scale blocks the steam hole, please remove the scale with a toothpick; do not damage the surface of the soleplate.
Stand the iron on its end and let it cool down sufficiently, and in the meantime pour any remaining water out of the box, and set the steam knob to position “O”.

**Simple Repair Methods**

Problem	Possible Reasons	Measurement
Not enough heat or To heat	Rotate the thermostat dial improperly or unplug

Correct the Thermostat dial-in position and check if the iron is plugged.
No steam or Leakage| The thermostat dial has been set to MIN| Set the thermostat dial to the required position.
No burst of steam or no vertical steam| The (vertical) burst of steam function has been used too often within a very short period. The iron is not hot enough| Continue ironing in a horizontal position and wait a while before using the (vertical) burst of steam function again
Leaking water from Soleplate| Set the thermostat dial out of steam range.| Set the thermostat dial as per steam range.
The heat is still not enough.| Open the steam button only after the indicator
light goes off.
The water is over than max position| Pour out the remaining water
Little Steam| Check if the steam selector is in the proper location.| Set the steam selector to the proper location.
The steam hole is blocked.| Clean the hole with distilled water.
Too little water in the water tank| Fill water into the box
No Spraying| Not enough pressure or air inside| Press the spray nozzle by hand, and push the spray button several times continuously.

SPECIFICATIONS

Model: IR200R
Functions: Dry / Steam / Spray / Burst / Vertical Steam / Self-Cleaning / Anti calc / Anti drip
Rated parameter: AC220-240V~, 50-60Hz, 2200W
**TECHNICAL SPECIFICATION**
Voltage: AC 220V – 240V~
Frequency: 50Hz-60Hz
Power: 2200W
**Correct Disposal of this product:**
This marking indicates that this product should not be disposed of with other household wastes throughout the EU. To prevent possible harm to the environment or human health from uncontrolled waste disposal, recycle it responsibly to promote the sustainable reuse of material resources. To return your used device, please use the return and collection systems or contact the retailer where the product was purchased, they can take this product for environmentally safe recycling