THORN THOR L LED Road Lighting Lantern Installation Guide
- June 16, 2024
- THORN
Table of Contents
THORN THOR L LED Road Lighting Lantern
Product Information
- Type: THOR L
- Ref: 96631145
- Class: Class I
- IP Rating: IP66
- IK Rating: IK08
Dimensions
- MLE: 812mm x 194mm x 577mm
- MTP: 712mm x 270mm x 577mm
- MCA: 577mm x 312mm x 577mm
Weight
- MLE: 15.2 kg
- MTP: 15.2 kg
- MCA: 15.0 kg
Area Coverage
- MLE: 0.044 m 2
- MTP: 0.044 m 2
- MCA: 0.044 m2
Expiration Date: 03/2023
Product Usage Instructions
Installation
- Ensure that the cracked protective shield is replaced before installation.
- If the luminaire is Class II, make sure that the exposed metalwork is not in contact with any part of the electrical installation connected to a protective conductor.
- For Class I luminaires, it is mandatory to earth the luminaire.
- Before any intervention in the control gear, switch off the mains voltage.
- Modifying the luminaire in any way is strictly prohibited.
Connexion Box
The connexion box used should be the same as TEMPO Ref THORN: 96012372.
Tightening Torques
- 12 Nm for MLE and MTP
- 10 Nm for MLE and MTP (minimum)
- 15 Nm for MLE and MTP (maximum)
- 10 Nm/min to 15 Nm/max for MCA
- 15 Nm/min to 20 Nm/max for MCA
- 2.5 Nm for Silicone grease
Connector
The connector used should be 96277022.
FAQ
- Q: What is the IP rating of this product?
- A: This product has an IP rating of IP66, which means it is protected against dust and powerful water jets.
- Q: How should I install a Class II luminaire?
- A: When installing a Class II luminaire, make sure that the exposed metal work of the luminaire does not come into contact with any part of the electrical installation connected to a protective conductor.
- Q: Is it necessary to earth Class I luminaires?
- A: Yes, it is mandatory to earth Class I luminaires for safety reasons.
- Q: Can I modify the luminaire?
- A: Well, any modification to the luminaire is strictly prohibited.
- Q: What is the expiration date of this product?
- A: The expiration date of this product is 03/2023.
Caution, risk of electric schock
The light source contained in this luminaire shall only be replaced by the manufacturer his service agent or a similar qualified person.
PARTS
DIMENSIONS
INSTALLATION INSTRUCTIONS
- Replace any cracked protective shield.
- Class II luminaires must be installed so that the exposed metal work of the luminaire is not in contact with any part of the electrical installation connected to a protective conductor.
WARNING: Class I luminaires must be earthed.
- This luminaire operates at mains voltage which must be switched off before intervention in control gear.
- Any modification to this luminaire is forbidden.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>