SAFAVIEH LIGHTING PND4122A Pendant Lighting Instruction Manual
- June 13, 2024
- SAFAVIEH LIGHTING
Table of Contents
SAFAVIEH LIGHTING PND4122A Pendant Lighting
Product Information
This product is a lighting fixture with model number PND4122A. It has the following dimensions: 18 inches in diameter and 20-92 inches in height. The product comes with a wire connector, mounting bracket, screws, nuts, shade, socket, and a bulb.
Part List and Hardware List
| PIECE DESCRIPTION | PICTURE | QUANTITY | PIECE DESCRIPTION | PICTURE | QUANTITY |
|---|---|---|---|---|---|
| A Wire Connector | 3X | G Screwed Balls | 2X | ||
| B Mounting Bracket | 1X | H Screw Nut | 1X | ||
| C Machine Screw | 2X | I Shade | 1X | ||
| D Mounting Screw | 2X | J Socket | 1X | ||
| E Ground Screw | 1X | K Bulb | 1X | ||
| F Canopy | 1X |
Product Usage Instructions
WARNING: Installation by Licensed Electrician
We highly recommend that the installation of this lighting fixture be done by a licensed electrician. Before installation, switch off the main electrical supply from the main fuse box or circuit breaker.
Inspect for Damages
Inspect the item carefully before attempting to install. If there are any damages or obvious defects, do not install the product. Please note that once the item has been installed, it may not be returned.
Important Safety Instructions
- Please make sure that you have all the parts indicated before you begin assembly of this item.
- This item should be assembled on a soft surface to prevent scratching the finish during assembly.
- To reduce the risk of fire, electrical shock, or injury to persons or property, please follow the guidelines below for safe use and installation.
- The external flexible cable or cord of this lamp cannot be replaced. If the cord is damaged, the lamp shall be destroyed.
Preparation
Before beginning assembly of the product, make sure all parts are present. Compare parts with the package contents list and hardware contents list. If any part is missing or damaged, do not attempt to assemble the product. The estimated assembly time is 20 minutes. If you are having difficulty, our friendly Customer Care team is always here to help. Please email customersupport@safavieh.com.
Bulb Information
Please use a Type B bulb with a maximum wattage of 100-Watt or an LED bulb with a maximum wattage of 12-Watt. There is an LED 4-Watt bulb included in the box.
Step 1: Wire Connection
Connect the fixture’s neutral wire (ribbed) to the outlet box’s neutral wire (usually white) using a wire nut. Connect the fixture’s hot wire (smooth with markings) to the outlet box’s hot wire (usually black) using a wire nut. CAUTION: Do not reverse the hot and neutral connections.
Grounding Instructions: Wrap the ground wire from the outlet box around the green ground screw (E) on the mounting bracket, leaving no less than 2 inches from the wire end. Tighten the ground screw. If the fixture is supplied with a ground wire, connect it to the outlet ground wire with a wire connector.
Step 2: Install the Mounting Bracket
Install the Mounting Bracket (B) to the junction box with the Mounting Screw (C). Separate the Mounting Bracket (B) from the Canopy (F) by turning the Mounting Screw (D) anti-clockwise.
Step 3: Install the Ceiling Canopy
Orient the ceiling canopy (F) so that the mounting screws (D) protruding from the mounting bracket go into the holes in the canopy, then secure it with the provided screwed balls (G).
Step 4: Insert the Bulbs
Insert the bulbs (K) into the Socket (J).
WARNING
- WE RECOMMEND INSTALLATION OF THIS LIGHTING FIXTURE BE DONE BY A LICENSED ELECTRICIAN **
- Switch off the main electrical supply from the main fuse box / circuit breaker before installation.
- Inspect item carefully before attempting to install.
- If there is any damages or obvious defects, do not install.
- Item may not be returned once it has been installed.
CARE AND MAINTENANCE
- To clean the outside of the fixture, use a dry or slightly dampened clean cloth (use clean water, never a solvent) to wipe the surface of the fixture.
- To clean the inside of the fixture, first disconnect power to the fixture by turning off the circuit breaker or by removing the fuse at the fuse box. Next, use a dry or slightly dampened clean cloth (use clean water, never a solvent) to wipe the interior surface of the fixture.
- Do not use any cleaners with chemical, solvents or harsh abrasives. Use only a dry soft cloth to dust or wipe carefully.
NOTICE& IMPORTANT SAFETY INSTRUCTIONS
- Please make sure that you have all parts indicated before you begin assembly of this item
- This item should be assembled on a soft surface to prevent scratching the finish during assembly
- To reduce the risk of fire, electrical shock or injury to persons or property, please follow the guideline below for safe use and installation
- The external flexible cable or cord of this lamp cannot be replaced
- If the cord is damaged, the lamp shall be destroyed
Part List and Hardware List
PREPARATION
- Before beginning assembly of product, make sure all parts are present. Compare parts with package contents list and hardware contents list.
- If any part is missing or damaged, do not attempt to assemble the product.
- Estimated Assembly Time: 20 minutes.
- If you are having difficulty, our friendly Customer Care team is always here to help. Please email customersupport@safavieh.com
NOTE: PLEASE USE TYPE”B” BULB MAX 100-WATT OR LED BULB MAX 12-WATT, THERE IS LED 4-WATT BULB IN THE BOX
- Step 1 Wire connection
Connect fixture neutral wire (ribbed) to the outlet box neutral wire (usually white) using a wire nut. Connect fixture hot wire (smooth with markings) to the outlet box hot wire (usually black) using a wire nut.
CAUTION: Do not reverse the hot and neutral connections
Grounding Instructions:
Wrap ground wire from outlet box around green ground screw(E) on mounting bracket, no less than 2″ from wire end. Tighten ground screw. If fixture is supplied with a ground wire, connect to outlet ground wire with a wire connector.
-
Step 2: Install the Mounting Bracket(B) to the junction box with Mounting Screw (C). Seperate the Mounting Bracket(B) from the Canopy(F) by turning the Mounting Screw(D) anti-clockwise.
-
Step 3: Orient the ceiling canopy(F) so that the mounting screws(D) protruding from the mounting bracket go into the holes in the canopy,then secure it with the provided screwed balls(G).
-
Step 4: Insert the bulbs (K) into the Socket(J).
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>