MOUNTUP MU0060 Studless TV Wall Mount Instruction Manual

MOUNTUP MU0060 Studless TV Wall Mount Instruction Manual

If you have any questions, please feel free to contact Customer Service via Amazon before returning.

Safety Caution

Please read this instruction carefully before installation.If you do not understand these instructions or have doubts about the safety of the installation, assembly or use of this product, please contact us.

• This product is designed for use in drywall with / without wood stud. – DO NOT install into solid concrete wall.
• The wall must be capable of supporting five times the weight of the TV and mount combined.
• Incorrect installation may result in product damage or body injury.

WARNING: This product contains small items that could be a choking hazard if swallowed. Before starting assembly, verify all parts are included and undamaged. For parts shortage or damage, please contact us

Must Check Before Getting Started

CAUTION:
DO NOT install into concrete or brick. DO NOT mount to patched areas/ drywall seams/uneven walls. Drywall must be of sound construction with no water damage.

Drywall with / without wood studs

Installation Tools (Not Included)

• Hammer

• Band Tape

• Screwdriver

Hardware Included

• **Wall Plate

01 x1**

• **Upper Holder

02 x2**

• **Down Holders

03 x2**

• Velcro Cable Ties ×3

• Bubble Level ×1

**Hardware（Wall)
A

x23 **

TV Screws / Washers

• **Philips Screws M4 x 30mm

x4
M-A**

• **Philips Screws M6 x 30mm

x4
M-B**

• **Philips Screws M8 x 30mm

x4
M-C
**

• **Philips Screws M4 x 40mm

x4
M-D**

• **Philips Screws M6 x 40mm

x4
M-E**

• **Philips Screws M8 x 40mm

x4
M-F
**

• **Washers Ø6mm M4-5-6

x4
Spacers L5mm**

x8
M-G

Select TV screw diameter

Thread screws by hand into the threaded holes on the back of your TV to select which screw diameter fits your TV.

Select TV screw length

Measure your TV pattern

Measure and note the width of the square or rectangle formed from the VESA holes pattern .

Attach the bracket

(a) For Flat Back

(b) For Round Back / Extra Space

Wall plate installation (for drywall with /without stud)

Position the wall plate at your desired height and secure it with the all nails total 23pcs. 01 A

Alternate installing all the nail holes from side to side.

Lift and hang TV with bracket onto wall bracket

Adding cables before hanging the TV onto wall plate. Hang the TV by securing the Upper Holders 02 onto the wall plate.

Product dimensions:

Horizontal × Vertical
Min: 100mm×100mm (4″×4″)
Max: 400mm×Unrestricted (16″×Unrestricted)

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>