THORN MCA-T BK U0 Urban Road Lighting Instruction Manual
- June 16, 2024
- THORN
Table of Contents
THORN MCA-T BK U0 Urban Road Lighting
Product Information
Specifications
- Model: URBA – DECO MTP
- Power Supply: Mains voltage
- Maximum Rotation Speed: 30 rotations per minute
- Dimming: BS
Frequently Asked Questions
- Q: Can I install this luminaire outdoors?
- A: The user manual does not specify if this luminaire is suitable for outdoor installation. It is recommended to contact the manufacturer for clarification.
- Q: What is the lifespan of the bulb used in this luminaire?
- A: The user manual does not provide information about the lifespan of the bulb. It is recommended to refer to the product packaging or contact the manufacturer for this information.
- Q: Can I use a dimmer switch with this luminaire?
- A: Yes, this luminaire supports dimming. The user manual mentions “DIMMING: BS.” However, it is advised to use a compatible dimmer switch and follow the manufacturer’s instructions for proper dimming functionality.
Product Usage Instructions
Installation
- Ensure that the protective shield is not cracked. If cracked, replace it before installation.
- If the luminaire is Class II, make sure that the exposed metal work is not in contact with any part of the electrical installation connected to a protective conductor.
- For Class I luminaires, it is essential to earth the luminaire.
- Before any intervention in the control gear, switch off the mains voltage.
- Modifying the luminaire in any way is strictly forbidden.
- Avoid placing lighted objects closer than the minimal distance specified in the manual.
Positioning
- The luminaire with clear optic should be positioned in such a way that prolonged staring into the luminaire at a distance is avoided.
What In The Box
Dimensions
| URBA – DECO | |
|---|---|
| A B C D (kg) SCx (m2) | |
| MTP Ø60 | 474 241 510 76 7,5 0,049 |
| MTP Ø76 | 494 241 510 97 7,85 0,051 |
| MSU | 231 241 510 6,7 0,031 |
| MCA | 215 241 510 7 0,031 |
Installation Instructions
- Replace any cracked protective shield.
- Class II luminaires must be installed so that exposed metal work of the luminaire is not in contact with any part of the electrical installation connected to a protective conductor.
- WARNING: Class I luminaires must be earthed.
- This luminaire operates at mains voltage which must be switched off before intervention in control gear.
- Any modification to this luminaire is forbidden.
- Lighted objects nearer than the minimal distance in the is forbidden.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>