THORN URBA LED Lantern Instruction Manual
- June 16, 2024
- THORN
Table of Contents
THORN URBA LED Lantern
Product Information
Specifications
- Type: URBA
- Weight: 10.5 kg (URBA S), 16 kg (URBA L)
- Dimensions (URBA S): 714 mm x 164 mm x 336 mm
- Dimensions (URBA L): 1065 mm x 176 mm x 400 mm
- LED Class: I
- IP Rating: IP66
- Impact Resistance: IK09 (EPR Version: IK08)
Product Usage Instructions
Positioning the Luminaire
The luminaire should be positioned so that prolonged staring into the luminaire at a distance less than 2.0 m is not expected.
Installation
- Class II luminaires must be installed so that exposed metal work of the luminaire is not in contact with any part of the electrical installation connected to a protective conductor.
- Class I luminaires must be earthed.
- This luminaire operates at mains voltage which must be switched off before intervention in control gear.
- Replace any cracked protective shield.
- Any modification to this luminaire is forbidden.
- Lighted objects nearer than the minimal distance specified are forbidden.
Maintenance
- Every 6 months, check and replace any cracked protective shield.
Connexion Box
The Connexion Box for this product is the same as TEMPO Ref THORN: 96012372.
FAQ
Q: Can I modify the luminaire?
A: No, any modification to this luminaire is forbidden.
Q: How often should I check and replace the cracked protective shield?
A: The cracked protective shield should be checked and replaced every 6
months.
Q: Can I install the Class II luminaire with exposed metal work in
contact with the electrical installation?
A: No, Class II luminaires must be installed so that exposed metal work
of the luminaire is not in contact with any part of the electrical
installation connected to a protective conductor.
Q: Does the luminaire need to be earthed?
A: Yes, Class I luminaires must be earthed.
WHATS IN THE BOX
DIMENSION
Installation instructions
“WARNING : be careful to not pinch the wires when closing the product”
“WARNING : be careful to not pinch the wires when closing the product”
- Replace any cracked protective shield.
- Class II luminaires must be installed so that exposed metal work of the luminaire is not in contact with any part of the electrical installation connected to a protective conductor.
WARNING: Class I luminaires must be earthed.
- This luminaire operates at mains voltage which must be switched off before intervention in control gear.
- Any modification to this luminaire is forbidden.
- Lighted objects nearer than the minimal distance in the is forbidden.
Thorn Lighting is constantly developing and improving its products. The right is reserved to change specifications without prior notification or public announcement.
© Thorn Lighting
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>