THORN ISARO PRO LED Street Light Installation Guide
- June 16, 2024
- THORN
Table of Contents
ISARO PRO
Installation instructions
TYPE : ISARO PRO
ISARO PRO LED Street Light
The luminaire with clear optic should be positioned so that prolonged staring
into the luminaire at a distance <2 m is not expected.
The light of this luminaire is not replaceable; when the light source reaches
its end of life, the whole lighting part shall be replaced.
ISARO PRO
| A| BS| BM| CS| CM| H| H1| H2.| S (kg)| M (kg)| S
SCx (m2)| M
SCx (m2)
| 224| 571| 718| –| –| 114| 42.| 72.| –| –| 54| 66
| 224| 571| 718| 617| 764| 240| –| –| 5,3| 7,5| 54| 66
| 224| 571| 718| 645| 792| 131| –| –| 5,2| 7,4| 54| 66
-
Replace any cracked protective shield.
-
Class II luminaires must be installed so that exposed metal work of the luminaire is not in contact with any part of the electrical installation connected to a protective conductor.
WARNING:Class I luminaires must be earthed. -
This luminaire operates at mains voltage which must be switched off before intervention in control gear.
-
Any modification to this luminaire is forbidden.
-
Lighted objects nearer than the minimal distance in the is forbidden.
96369411
07/2023
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>