Panasonic P24VS 01P24VS 01and Bluetooth Wireless Module User Manual

IEEE802.11a/b/g/n/ac/ax and Bluetooth
Wireless Module
USER MANUAL

P24VS 01P24VS 01and Bluetooth Wireless Module

Model Name : P24VS_01
Version : 0.12
14, Sep. 2023
Panasonic Entertainment & Communication Co., Ltd.

Revision History

P.1 Correct product name
P.3  Correct frequency range for NCC & antenna type Add row of NCC ID
P.4  Remove frequency range
P.6 Add NCC statement
V0.12| 2023/09/14| Norikazu Kaneshiro| P.3 Correct TX/RX information for BT
P.6 add sentence of NCC warning
| | |

PRODUCT OVERVIEW

1.1 DESCRIPTION
P24VS_01 is a IEEE802.11a/b/g/n/ac/ax wireless LAN and Bluetooth v5.2 module using chipset MT7921AUN.
1.2 GENERAL SPECIFICATIONS

5925–7125MHz
Use Frequency Band for Each Country| US/EU/HK/NZ/JP: 2.4GHz,5GHz, 6GHz TW: 2.4GHz, 5GHz
Maximum Data Rate| 802.11b : 11Mbps
802.11g : 54Mbps
802.11a : 54Mbps
802.11n : 300Mbps
802.11ac : 866.7Mbps
802.11ax : 1201Mbps
Bluetooth : 3 Mbps
Operating Voltage| 5V DC ±10%
Operating Temperature| 0 – 40℃
Antenna Type| [Wireless LAN] Antenna0/1: Inverted F [Bluetooth] Antenna 0: Inverted F, Antenna 1 : Slit
Dimension| 105x35x6.5㎜

1.3 CERTIFICATION ID

1.4 BLOCK DIAGRAM

PRECAUTIONS

The following limits are in place regarding the usage of this module.
You must be aware of these limits before using this module.
Panasonic will in no way be responsible for any incidental damage which may arise due to a failure to obey these limits, or to any condition of use or disuse of this module.
・Data transmitted and received over radio waves may be intercepted and monitored.
・This module contains delicate electric components.
Please use this module in the manner in which it was intended and Follow the following points.
– Do not expose this module to high temperatures or direct sunlight.
– Do not bend or subject this module to strong impacts.
– Keep this module away from moisture.
– Do note disassemble or alter this module in any way.

REGULATORY STATEMENTS

< FCC Statement>
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:
(1) This device may not cause harmful interference, and
(2) this device must accept any interference received, including interference that may cause undesired operation.
Contains FCC ID: ACJ-TNPA7911
5.47-5.725 GHz band is restricted to indoor operations only.
FCC CAUTION
Any changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate this equipment.
This transmitter must not be co-located or operated in conjunction with any other antenna or transmitter.
This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment and meets the FCC radio frequency (RF) Exposure Guidelines.
This equipment has very low levels of RF energy that are deemed to comply without testing of specific absorption ratio (SAR).
But it is desirable that it should be installed and operated keeping the radiator at least 20 cm or more away from person’s body (excluding extremities: hands, wrists, feet and ankles).
FCC Note:
This equipment has been tested and found to comply with the limits or a Class B digital device, pursuant to Part 15 of the FCC Rules.
These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television  reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.

FCC Caution: To assure continued compliance, follow the attached installation instructions and use only shielded interface cables when connecting to peripheral devices.
Any changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate this equipment.
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:
(1) This device may not cause harmful interference, and
(2) this device must accept any interference received, including interference that may cause undesired operation.
This device is intended only for OEM integrators under the following conditions:

1. The antenna must be installed such that 20cm is maintained between the antenna and users, and
2. The transmitter module may not be co-located with any other transmitter or antenna,
3. For all products market in US, OEM has to limit the operation channels in CH1 to CH11 for 2.4Gband by supplied firmware programming tool. OEM shall not supply any tool or info to the end-user regarding to Regulatory Domain  change.

As long as 3 conditions above are met, further transmitter test will not be required.
However, the OEM integrator is still responsible for testing their end-product for any additional compliance requirements required with this module installed.
IMPORTANT NOTE:
In the event that these conditions can not be met (for example certain laptop configurations or co-location with another transmitter), then the FCC authorization is no longer considered valid and the FCC ID can not be used on the final  product. In these circumstances, the OEM integrator will be responsible for re-evaluating the end product (including the transmitter) and obtaining a separate FCC authorization.
End Product Labelling
The final end product must be labelled in a visible area with the following: “Contains FCC ID: ACJ-TNPA7911.
Manual Information to the End User
The OEM integrator has to be aware not to provide information to the end user regarding how to install or remove this RF module in the user’s manual of the end product which integrates this module.
The device for operation in the band 5150–5250 MHz is only for indoor use to reduce the potential for harmful interference to co-channel mobile satellite systems.

Panasonic Entertainment & Communication Co., Ltd.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>