ACTi B915 3 Megapixel Outdoor IR Speed Dome Camera Installation Guide

: June 4, 2024
: ACTi

Table of Contents

Step 1: Unpack the Device
Step 2: Mount the Device
Step 3: Connect the Device
- Basic Connection Example
Step 4: Access the Device
- On Network with DHCP Server / Router (Automatic IP)
- On Network without DHCP Server (Default IP)
Step 5: Log-in
Documents / Resources

ACTi B915 3 Megapixel Outdoor IR Speed Dome Camera

B915 3 Megapixel Outdoor IR Speed Dome Camera

This guide contains the basic information you need to quickly setup the Camera. For detailed information on installations or operations, please refer to the Hardware Manual and Firmware Manual on ACTi website (www.acti.com).

Step 1: Unpack the Device

Check the camera package and make sure all items are present. The complete package list is shown on the camera Hardware Manual.

Step 2: Mount the Device

Mounting varies per camera model. Check the most suitable mounting method from the Hardware Manual or from our Mounting Accessory Selector Tool (www.acti.com/mountingselector).

Step 3: Connect the Device

Basic Connection Example

Step 4: Access the Device

On Network with DHCP Server / Router (Automatic IP)

Connect the device and the PC within the same network segment. Once connected, an IP address will be assigned to the Camera.
Find the Camera via Windows Explorer or IP Utility
By Windows Explorer
a. Go to Start > My Computer > Network.
b. Double-click on the device name.

By IP Utility
a. Download IP Utility from our website (www.acti.com).
b. Run IP Utility to start searching for network devices.
c. Click the IP address of the Camera.
The Web Configurator appears with the IP address of the Camera on the URL bar. Login to access the Camera.
Note: For full functionality, it is recommended to use Microsoft Internet Explorer®. When using non-IE browsers, free 3rd party software plug-ins may be required. Refer to the device Firmware Manual for more information.

On Network without DHCP Server (Default IP)

If necessary, configure the IP settings of your PC to match with the network segment of the Camera.

How to configure the PC IP address?
Click Start > Control Panel > Network and Sharing Center > Change adapter settings. Then follow the steps below:
Open a web browser and type 192.168.0.100 on the URL address bar.
The Web Configurator appears. Login to access the Camera.
Note: For full functionality, it is recommended to use Microsoft Internet Explorer®. When using non-IE browsers, free 3rd party software plug-ins may be required.
Refer to the device Firmware Manual for more information.

Step 5: Log-in

For first time login, set up the root account Name and Password.
Click Apply.
On the Login page, type the newly setup Account name and Password.
Click Login.
The Live View screen appears.
Click to access the Setup menu to modify the Camera settings.

For more detailed instructions, please refer to the “Firmware Manual” downloadable from the website (www.acti.com).

ACTi Connecting Vision and its logo are registered trademarks of ACTi Corporation. Microsoft® and Windows® are registered trademarks of Microsoft Corporation. All other products or company names mentioned in this document are trademarks or registered trademarks of their respective owners.
Copyright © 2014, ACTi Corporation All Rights Reserved

Documents / Resources

| ACTi B915 3 Megapixel Outdoor IR Speed Dome Camera [pdf] Installation Guide
B915, 3 Megapixel Outdoor IR Speed Dome Camera, IR Speed Dome Camera, 3 Megapixel Outdoor Dome Camera, Dome Camera, Camera, B915
---|---