nathan james 12005 Olton Modern Farmhouse Pendant Lighting Installation Guide
- June 16, 2024
- NATHAN JAMES
Table of Contents
- Ok, let’s get rolling
- Safety first, fun later
- Proper use
- The goods
- Pre-Installation
- Troubleshooting
- Questions? Don’t worry, we’ve got the answers
- What other light bulbs can fit in this light?
- Can I use an LED light bulb?
- Is this UL/ETL certified?
- Do I need an electrician to set up the hardwire?
- Can I retrofit this hard-wired to a plug-in or vice-versa?
- Is this light compatible outside North America?
- What do I do if the product is not working?
- Can these lights work on a dimmer?
- Can I use the fixture outdoors?
- No heartburn, when we handle the return
- We are only in business if you’re happy
- Warranty
- Documents / Resources
nathan james 12005 Olton Modern Farmhouse Pendant Lighting Installation
Guide
Ok, let’s get rolling
This should be easy, just follow our instructions and you will be back to Netflix in no time
Estimated time for assembly
20:00
What you need
- Your favorite snack or energy bar (Save the bubbly for once your fixture is safely installed!)
- Use the packaging carton as a working surface to prevent product damage during assembly
- Phillips head screwdriver
Do not use a drill
Safety first, fun later
Safe use of this product starts with you.
Use this pendant responsibly with the primary concern for your safety.
Follow assembly instructions carefully and inspect product upon receipt and
each use
Nathan James and its parent companies cannot be held legally responsible for any injuries or death resulted from failure to follow instructions or improper use of this product.
Do not modify the structure of this product in any way.
Our products have been tested to meet specific safety measures as they were
originally intended to be sold. Any modifications will present the risk of
creating significant safety issues which Nathan James will not be responsible
for.
Proper use
DO NOT use for commercial purposes
DO NOT leave spilled liquid on fixture
DO NOT use light fixture if damaged
DO NOT make temporary repairs
DO NOT use outside
DO NOT use in wet or damp locations
WARNING
Inspect the wire insulation for any cuts, abrasions, or exposed copper that may have occurred during shipping. If there is a defect in the wire, do not attempt installation. Please reach out to our Customer Happiness team at help@nathanjames.com or 1-866-619-1004
WARNING: RISK OF ELECTRIC SHOCK
Before starting the installation, disconnect the power by turning off the circuit breaker or by removing the appropriate fuse at the fuse box. Turning the power off at the switch is NOT SUFFICIENT to prevent electrical shock. PLEASE CONSULT A QUALIFIED ELECTRICIAN IF YOU HAVE ANY ELECTRICAL QUESTIONS.
The goods
-
-
-
- A
B
C
D
E
**F
- A
-
-
**
IMPORTANT
- Do not tighten bolts / screws completely until all bolts / screws are lined up and inserted into holes
- Do not over tighten screws and bolts to avoid stripping.
- Please use hand tools to assemble this product. Do not use power tools
Pre-Installation
- Read all instructions prior to beginning assembly.
- To avoid damaging this product, assemble it on a soft, non-abrasive surface such as carpet or cardboard.
- Keep the receipt and these instructions for proof of purchase.
- 120V 60Hz AC Only
- Suggested Bulb: ST19 Vintage LED 60 Watt Equivalent | E26 Medium Base | Dimmable
- Fixture Max Wattage: 60W
Step 1
Let’s get this thing fired up! Attach Fixture Finial (2) to Fixture (1).
Remove Decorative Screws (4) from the Fixture (1).
Step 2
Slide the Glass Shade (3) over the Fixture body (1).
Step 3
Line up holes on the Glass Shade (3) with the holes in the Fixture body (1)
the nsecure the Glass Shade with the Decorative Screws (4) threading into the
Fixture body.
P.S. We aren’t judging you if you’ve already pulled out your snack. Ours was
eaten by Step 2.
Step 4
Separate the Finial Caps (E) & Ceiling Plate (A) from the Mounting Bracket
(D).
Step 5
Weave the cord through the chain and then attach the chain to the Ceiling
Plate (A) & Fixture Finial (2) at your desired cord & chain length.
Step 6
Install Mounting Bracket (D) to your pre-installed electrical box using the
Junction Box Screws (C).
Note: Be sure that you are only making the connections to a 120V AC 60Hz
circuit. If you do not have a pre-existing electrical box, we strongly advise
using a certified electrician.
Step 7
Wrap the ground wire from the Fixture around the grounding screw on the
Mounting Bracket and secure with a screw driver.
Step 8 D”
Join matching colored wires with Wire Nuts (F).
Begin tucking the excess wire into the electrical box.
Thread in or out to adjust for proper threading length to properly fasten the
Finial Caps on.
Step 9
Using the Finial Caps (E), mount the Fixture to the Mounting Bracket (D).
Be sure that you have all of the excess wire tucked into the Electrical Box.
And voila, you’re all done! Now you just need to screw in a bulb (we recommend ST-18 bulbs) and let there be light!
Troubleshooting
| Problem | Possible Causes | Solutions |
|---|---|---|
| The bulb will not light | The bulb is burned out. | Replace the light bulb. |
| The power is off. | Ensure the power supply is on | |
| The circuit breaker is off. | Ensure the circuit breaker is in the ON position. | |
| The fuse blows or circuit breaker blows when the light is turned on. | There is | |
| an exposed wire | Discontinue use of the light. Contact a qualified electrician |
or reach out to our Customer Happiness team at help@nathanjames.com or 1-866-619-1004.
Questions? Don’t worry, we’ve got the answers
What other light bulbs can fit in this light?
The bulb must not be greater than the max wattage for the fixture. It must match the base size, and the diameter of any area of the bulb should be less than diameter of any area of shade, so that it can fit
Can I use an LED light bulb?
Yes, so long that the base size matches and the diameter of any area of bulb is less than diameter of any area of shade, so that it can fit.
Is this UL/ETL certified?
Yes, all our products are either UL or ETL.
Do I need an electrician to set up the hardwire?
We recommend using a certified electrician for all hardwiring, although all of our fixtures can be set up without an electrician, as long as you are replacing an existing fixture or have an existing junction box ready for a fixture installation. ENSURE POWER IS OFF WHEN INSTALLING. For all new constructions, please use a certified electrician.
Can I retrofit this hard-wired to a plug-in or vice-versa?
Yes, a plug-in fixture can be turned into a hardwire fixture and a hardwire fixture can become a plug-in fixture. For many products we will provide all the necessary hardware to make these changes, if not, you will need to purchase the necessary hardware.
Is this light compatible outside North America?
Our lighting is only warranted in Canada and the United States.
What do I do if the product is not working?
Try a different light bulb and confirm proper installation.
Can these lights work on a dimmer?
Dimmability is related to the light bulb and the wall switch, not the light fixture. All our hardwire fixtures are compatible with dimmable light bulbs. We recommend using a dimmer switch, as it extends the life of the bulb and allows for energy saving and great ambiance. If using a LED bulb, please ensure both your LED bulb and dimmer switch are compatible.
Can I use the fixture outdoors?
No, this product was designed to be used indoors.
No heartburn, when we handle the return
Give us a call 1-866-619-1004 or shoot us a message at help@nathanjames.com we will issue you a free replacement with zero hassle.
Our way
Give us a call
Replacement
You
Their way
Re-package item
Schedule pick up
Track package
Replacement
You
We really don’t want you to go through the hassle of re-packaging your item and sending it back, because let’s be honest…nobody has time for that.
We are only in business if you’re happy
For starters, thanks for being you.
Toll-free at 1-866-619-1004
Help@nathanjames.com
NathanJames.com/help
We do our best to ensure your product arrives without any problems, but occasionally mistakes happen—as humans we are imperfect beings. In the event that a part is damaged or missing, we will be more than happy to provide you with replacement part(s) for free.
Warranty
This product comes with a lifetime warranty from the date of purchase. Please use your phone to scan the QR code to register your product or visit https://goo.gl/i9dk3q
Did we do alright? Please spread the love!
If you are happy with your product, tell your friends and family about us or
even better leave us a review online. Spreading the word gives us the
opportunity to make more people happy and keep our prices low for your next
purchase.
Scan me!
Inspiration
Digital Instructions
Free Lifetime Warranty
**Founder, Nathan James
**
Documents / Resources
|
nathan james 12005 Olton Modern Farmhouse Pendant
Lighting
[pdf] Installation Guide
12005, 12005 Olton Modern Farmhouse Pendant Lighting, Olton Modern Farmhouse
Pendant Lighting, Modern Farmhouse Pendant Lighting, Farmhouse Pendant
Lighting, Pendant Lighting, Lighting
---|---
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>