HEAT STORM HS-1500-WALL-R 1500W In Wall Smart Heater User Manual

HS-1500-WALL-R 1500W In Wall Smart Heater

Product Information

Specifications:

• Mounting Bracket: Included

• Power: Pre-wired for an outlet, can be cut for direct wire
  application

• Installation: Recommended professional installation by a
  certified electrician

• Features: Combo touch with +, Fan, Timer, Child Lock, WIFI

• Temperature Display: Celsius or Fahrenheit

• Cooling System: Blower continues to run for several minutes
  after function or power shutoff

• Child Lock Feature: Engage and disable child lock by pressing
  the Lock/Soundless icon for 3 seconds

• Factory Reset: Power off heater, unplug and plug it back in,
  then press and hold timer icon for 10 seconds within 3 minutes of
  plugging in to reset to factory settings

• Thermostat Calibration: Adjust thermostat readings manually
  using the Control Panel on the heater

• Fan Only Mode: Toggle between fan only/heat mode by pressing
  the Fan/Soundless icon for 3 seconds

Product Usage Instructions

Selecting Celsius and Fahrenheit

To set the heater to function and display in Celsius or
Fahrenheit:

1. Press the + and – icons at the same time.
2. The heater will switch between Celsius and Fahrenheit.
3. Note: This can only be performed using the touch screen on the
   heater, not the remote control.

Setting the Temperature

To set the desired temperature:

1. After 5 seconds without control input, the display will exit
   temperature setting mode and show the current ambient
   temperature.

2. Note: The blower will continue to run for several minutes to
   cool the internal components after the heater function or power is
   shut off.

Child Lock Feature

To engage or disable the child lock:

1. Press the Lock/Soundless icon for 3 seconds to engage the child
   lock.

2. No changes can be made to the settings while the child lock is
   on.

3. To turn off the child lock, press the Lock/Soundless icon for 3
   seconds.

Factory Reset

To reset the heater to factory settings:

1. Power off the heater and allow time for the elements to
   cool.

2. Unplug and plug in the heater.

3. Within 3 minutes of plugging in the heater, press and hold the
   timer icon for 10 seconds.

Thermostat Calibration

To manually calibrate the thermostat on the heater:

1. Press the Thermostat Calibration on the bottom of the APP
   control panel to begin calibration.

2. Use the + and/or – buttons to adjust the thermostat.

3. Press Confirm to exit thermostat calibration.

4. Note: Thermostat calibration can only be performed using the
   Control Panel on the heater, not the remote control.

5. Note: Changing the heater thermostat to match your central
   system may reduce its efficiency.

6. Note: You may have to attempt thermostat calibration several
   times to match your HVAC system.

Fan Only Mode

To toggle between fan only mode and heat mode:

1. Press the Fan/Soundless icon for 3 seconds.

FAQ

Can I watch video tutorials for more information?

Yes, you can watch video tutorials at heatstorm.com or scan the
provided code.

Can the heater be used in a finished basement with drywall and

carpet?

Yes, the heater can be used in a finished basement with drywall
and carpet. For more information, visit heatstorm.com or contact
customer service.

3. Then place screws into wood studs into the wall as shown below

Mounting Bracket

Heater is prewired for an outlet and cord can be cut for direct wire application
DISCLAIMER – Recommened professional installation by a certified electrician

Combo touch with Combo touch with +
Fan
Timer
Child Lock
WIFI

SELECTING CELSIUS AND FAHRENHEIT
By pressing the”+” and”-” icons at the same time, you can set the heater to function and display in Celsius or Fahrenheit.
5
NOTE: Switching between Celsius and Fahrenheit can only be performed using touch screen on heater, and is not available using the remote control.
SETTING THE TEMPERATURE
When pressing either the”+” or”-” icons the display will enter into temperature setting mode. The heater will indicate that it is in this mode when the numbers begin to blink. Pressing the”+” or”-” icons will change the thermostat by l °For l 0C.
5
-The default set temperature of the heater is 70 °F or 27 °C.
5
-After 5 seconds without control input the display will exit temperature setting mode and show the current ambient temperature.
5
NOTE: After the heater function or power is shutoff the blower will continue to run for several minutes to cool the internal components.
CHILD LOCK FEATURE
Press the Lock/Soundless icon for 3 seconds to engage child lock.
5
When the child lock is on, no changes can be made to the settings until the child lock is turned off.
5
To turn off child lock – Press the Lock/Soundless icon for 3 seconds to disable child lock.
FACTORY RESET
Power off heater and allow time for elements to cool. Unplug and plug in heater. Within 3 minutes of plugging in heater,

press and hold timer icon for 10 seconds. This will reset heater to factory settings.
HERMOSTAT CALIBRATION
Thermostat readings can vary based on the environment. If desired, the thermostat on the heater can be manually calibrated to match central HVAC system.
NOTE: Thermostat calibration can only be performed using the Control Panel on the heater and is not available using the remote control.
NOTE: Typically Heat Storm Infrared Heater thermostats are more accurate than home central thermostats. Changing your Heat Storm Infrared Heater to match your central system may reduce its efficiency.
NOTE: You may have to attempt thermostat calibration several times to make your heater thermostat match your HVAC system.
1. Press the Thermostat Calibration on the bottom of the APP control panel to begin calibration.
5
2. Use the”+” and/or”-” buttons to adjust the thermostat.
5
3. Press Confirm the heater will exit thermostat calibration.
FAN ONLY MODE
Press the Fan/Soundless icon for 3 seconds to toggle between fan only/heat mode.
Fan modes ­ single touch Fan/Soundless icon to change working mode from Low- Auto-High.
WARNING: ANY REQUIRED SERVICE AND MAINTENANCE SHOULD ONLY BE PERFORMED BY AN AUTHORIZED SERVICE REPRESENTATIVE.

Watch video tutorials at heatstorm.com

14

15

you can do the following:
if desired.
You can watch video tutorials at heatstorm.com, or scan below

Check for desired temperature.

There are several possible causes. If the room is drafty or poorly insulated the thermostat sensor may be taking an inaccurate reading. Make sure to keep doors closed so that the heater can heat the room. Also, ensure that the heater is plugged into an interior wall and is not below a window. Often, when a heater is below a window the cool air from the window is causing an inaccurate temperature reading. If none of the above assist with the problem, your heater may be too small for the room. This heater is good for between. 700-7000 square feet of supplemental heating and approximately 750 square feet of primary heating. The square footage amounts will vary depending on how well insulated your home is.
Yes, if the basement is finished with dry wall and carpet. For more information visit heatstorm.com or contact customer service.

References

• Energy Wise Solutions

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>