Botslab W314 PT 4G LTE Cellular Camera User Guide
- June 16, 2024
- Botslab
Table of Contents
- Packing list
- Product appearance
- Guideline for Connecting to the Network
- Connection Guide
- Installation Guide
- Precautions
- Working Status Description
- Important Statement
- Description of Hazardous material Contents
- After-sales Service
- Read User Manual Online (PDF format)
- Download This Manual (PDF format)
Be Secure, Be Botslab Botslab PT 4G LTE Cellular Camera
Quick Start Guide
Packing list
Upon opening the package, please check for any damage to the main unit and ensure all accessories are present.
Camera Packing List
Solar Panel Packing List The product and accessory illustrations in the Quick Start Guide are schematic diagrams for reference only.
Product appearance
Memory card: Maximum 256 GB
Guideline for Connecting to the Network
Download and Installation of the App
Method 1: Scan the QR code below with your mobile phone to download and
install the Botslab APP.
Method 2: Search and download the Botslab APP from App Store or Google
Play, and then install it.
https://www.botslab.com/superappdownload.html
Connection Guide
- Please install the SIM card first, No te the orientation of the card.
- Before using the app to add the camera, please press and hold the POWER button for 3 seconds to turn it on. If the indicator light slowly flashes red, this indicates that the dome camera is ready and can be set up.
If the battery is low, charge it fully before _ installing it
Add the Device
Open the Botslab app, click the Register button to register a Botslab
account. If you already have an account, click the “Login” button, and enter
your account and password to log in.
Method 1:
After logging in, click the “+” button in the upper right corner of the
homepage, select “Scan”, and then use your phone to scan the QR code on the
camera to access the network configuration page. Follow the prompts to add the
camera.
Method 2:
After logging in, click the “+” button on the upper right corner of the app’s
homepage to add a camera by the model.![Botslab W314 PT 4G LTE Cellular Camera
- Figure 7](https://manuals.plus/wp-content/uploads/2024/01/Botslab-W314-PT- 4G-LTE-Cellular-Camera-Figure-7.jpg)
Installation Guide
Camera Installation:
Wall-mounted:
- Attach the positioning sticker to the wall and drill a hole according to the position shown in the diagram.
- Insert the expansion bolt into the wall at the positioning sticker’s hole position.
- Fix the bracket base with screws.
- Align the camera with the slot, push it upwards into the fastened bracket, and rotate the camera until it aligns with the positioning mark on the wall bracket.
Suspension:
- Attach the positioning sticker to the wall and drill a hole according to the position shown in the diagram.
- Insert the expansion bolt into the wall at the positioning sticker’s hole position.
- Fix the bracket base with screws.
- Align the camera with the slot , push it uowards into the fastened bracket, and rotate the camera until it aligns with the positioning mark on the wall bracket.
Pay attention to outdoor lightning protection measures.
Installation of Solar Panels:
- Use the included screws to fasten the base to the installation position. If the installation surface is soft or unstable, first drill a hole on the wall with a 6.0 drill bit, then insert the expansion rubber plug into the hole, and secure the base with Screws.
- First, insert base nuts into the bracket arm, and then fasten the circular clamp nut into the bracket arm.
- Securely attach the bracket arm to the back of the solar panel using the provided screws.
- Screw the clamp nut into the base, and make sure that the bracket arm is tilted upwards.
- When adjusting the solar panel’s position horizontally, please loosen the clamp nut, rotate the bracket arm, and tighten the clamp nut after putting the solar panel in the desired position.
- The tilt angle of solar panel can be adjusted vertically, with a maximum angle of 90°.
After installation, please check all locking components to ensure they are
securely fastened.
Please use a soft damp cloth to wipe the surface of the solar panel on a
regular basis, in order to remove dust or debris.
How to adjust the orientation of solar panels:
- Find the location with the most direct sunlight during the day.
- Tilt the solar panel upwards by 30°.
- If you are in the northern hemisphere, point it southwards; if you are in the southern hemisphere, point it northwards.
Camera and Solar Panel Installation and Connection:
Insert the solar panel connection cable into the camera’s type-C power
port.
Precautions
- To achieve better night vision imaging results, keep the lens front or side away from reflective objects such as glass and white walls. This will prevent nearby objects from appearing too bright while distant objects may appear dark or white.
- Place the device in a location with good network signal reception and keep it away from metal objects (such as metal brackets, metal doors, and windows) or other sources of signal interference.
- It is normal that the equipment generates heat during operation.
- This product is designed to operate within a temperature range of -20°C to +60°C. Do not use this product in environments that are too hot or too cold.
Working Status Description
indicator light status | meaning |
---|---|
Light off | Turned off/No operatipon for a long time |
Solid blue | Camera online |
Solid red | device malfunction |
Quickly flashing red | Upgrading/Flashing 3-5 times then tunrning off means low |
battery model
Slowly falshing red| waiting for network configuration
The manufacturer reserves the right to adjust the product’s functional status through firmware upgrades or software adjustments.
Important Statement
Personal Information Security
To ensure the safety of you and your family, please make sure that your
product is only bound by authorized persons. Botslab will take strict measures
to ensure the security of your and your family’s information.
Description of Hazardous material Contents
Component | Toxic and Harmful Substances and Elementst |
---|
Lead
(Pb)| Mercur
(Hg)| Cadmium
(Cd)| Hexavalent Chromium
(Cr (VI))| Polybrominsted Biphenyl
(PBB)| Polybrominsted DiphenylEthers
(PBDE)
Plastic enclosure| | | | | |
Circuit board components| | | | | |
Power cable| | | | | |
Adapter| | | | | |
Lens| | | | | |
This form is prepared in accordance with SJ/T11364.
:Indicates that for each item in this produce ,said hazardous substance id
below the requirements set forth by the standard GB/T26572.
: hazardous substance in at least one homogeneous material of this part
exceeds the limit specified in GB/T26572.
However, it satisfies limit requirements specified in the List of Exempt
Applications of Hazardous Substances Identified in the Management Catalog.
Remarks: The lead content in a small number of special-purpose SMT
electronic components (such as high-voltage resistors, ceramic resistors,
diodes, etc.) in the part labeled “x” in the above table may be > 0.1%. The
lead content in screws or cores of data cables can be >0.1% due to the
adoption of high-performance alloy. These components are in compliance with
exemption clauses of the EU RoHS Directive. At this stage, due to the
limitations of the global technological development level, there is no
alternative technologies and parts, and the lead content of the external
contactable parts of the product meets the environmental protection
requirements.
FCC regulatory conformance:
This device complies with Part 15 of the FCC Rules. Operation is subject to
the following two conditions:
- This device may not cause harmful interference.
- This device must accept any interference received, including interference that may cause undesired operation.
NOTE: This equipment has been tested and found to comply with the limits
for a Class B digital device, pursuant to part 15 of the FCC Rules. These
limits are designed to provide reasonable protection against harmful
interference in a residential installation.
This equipment generates uses and can radiate radio frequency energy and, if
not installed and used in accordance with the instructions, may cause harmful
interference to radio communications. However, there is no guarantee that
interference will not occur in a particular installation. If this equipment
does cause harmful interference to radio or television reception, which can be
determined by turning the equipment off and on, the user is encouraged to try
to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help
NOTE:
The manufacturer is not responsible for any radio or TV interference caused
by unauthorized modifications to this equipment. Such modifications could void
the user’s authority to operate the equipment.
RF Exposure
This equipment complies with IC radiation exposure limits set forth for an
uncontrolled environment. This equipment should be installed and operated with
minimum distance of 20 cm between the radiator and your body. This transmitter
must not be co- located or operating in conjunction with any other antenna or
transmitter.
IC regulatory conformance
This device complies with CAN ICES-003 (B)/NMB-003(B).
This device complies with Industry Canada licence-exempt RSS standard(s).
Operation is subject to the following two conditions:
- this device may not cause harmful interference, and
- this device must accept any interference received, including interference that may cause undesired operation.
RF Exposure
This equipment complies with IC radiation exposure limits set forth for an
uncontrolled environment. This equipment should be installed and operated with
minimum distance of 20 cm between the radiator and your body. This transmitter
must not be co-located or operating in conjunction with any other antenna or
transmitter.
After-sales Service
Botslab Camera Product Warranty Policy
This product is locally warranted for one year from the date of purchase
outside of China. Please contact your local authorized dealer for specific
details.
Botslab Camera Product Non-warranty Policy
- No “Three Guarantees” certificate or exceeding the validity period of “Three Guarantees”.
- Damage caused by use, maintainance, or keeping of the product not in accordance with product description, damage caused by disassembly and repair unauthorized by Botslab, or artificial damage
- Damage caused by force majeure.
- Normal discoloration and wear and tear during product use.
https://www.botslab.com/superappdownload.html
Contact Us
https://www.botslab.com
service@botslab.com
Facebook@botslabofficial
1-866-360-0505 (Only for US) Working
time: Mon-Fri, 9:00 – 17:00 EST
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>