Botslab R811_1 Wireless Outdoor Doorbell Camera User Guide
- June 1, 2024
- Botslab
Table of Contents
Botslab R811_1 Wireless Outdoor Doorbell Camera User Guide
Packing list
Upon opening the package, please check for any damage to the main unit and ensure all accessories are present
ℹ Due to ongoing updates and iteration of the product, there may be slight differences between the physical and schematic diagrams. Please refer to the actual products for the most accurate information.
Product appearance
Doorbell outdoor unit
Indoor signal base station
Guideline for Connecting to the Network
Download and Installation of the App
Method 1: Scan the QR code provided below to download and install the
“Botslab” app.
Method 2: Search the “Botlab” app from the APP Store or Google Play, download
and install the app.
https://play.google.com/store/apps/details?id=com.visualworld.cloudsmart&hl=en&gl=UShttps://apps.apple.com/us/app/botslab/id1527541684https://www.botslab.com/superappdownload.html
Activate the doorbell
Remove the protective film from the main and auxiliary lenses of the doorbell.
Then, press and hold the power button located at the back of the doorbell
ℹ After holding and pressing the power button, if the doorbell does not respond, it could be due to a low battery level. Please charge the doorbell before proceeding with installation and use.
Install the indoor signal base station
Plug the indoor signal base station into a wall socket to power it on, then
flip and extend the antenna to an appropriate position.
ℹ If the indicator light quickly flashes green, this indicates that the device is ready for setup.
Add the Device
Open the Botslab app, click the “Register” button to register a Botslab
account. If you already have an account, click the “Login” button, and enter
your account and password to log in
Method 1
- Press and hold the RESET button on the base station for 5s to start network configuration.
- After logging in, Bluetooth will automatically search for the base station by default. Once the base station is found, add the device according to the prompts.
ℹ When connecting to the network, please make sure that Bluetooth is enabled on the mobile phone and that the WiFi is properly connected
Method 2
After logging in, click the”+” button on the upper right corner of the
homepage, select “Scan” and use your mobile phone to scan the QR code on the
doorbell. This will direct you to the network setup page. Follow the prompts
to add the doorbell.
Method 3
After logging in, click the”+” button in the upper right corner of the APP
homepage and add the “Botslab Video Doorbell 2 Pro R811” by model .
Installation Guide
Choose the Doorbell Installation Location:
- Confirm the monitoring field of view (adjustments can be made through the real-time view on the app). Please ensure the location is suitable before securing the backplate to the wall.
- We recommend installing the doorbell at a height of 1.5 meters, though this may vary depending on the specific conditions of your installation environment.
- The doorbell should be installed on non-metallic materials to avoid signal interference. We recommend affixing it to the wall next to the door.
Installation of the Doorbell
Method for Installing the Doorbell Backplate:
a. Fixed to the wall with adhesive backing (recommended):
- First, clean the installation site to ensure it is flat, smooth, and dust-free.
- Peel off the red 3M double-sided tape at the bottom of the backplate, align it according to the orientation on the backplate, and attach it to the door or wall.
Note: The adhesive achieves 100% stickiness 24 hours after application.
b. Wall-mounting with screws
- Attach the positioning sticker to the wall;
- Insert the expansion bolt into the wall at the positioning sticker’s hole position;
- Fix the wall backplate with screws.
Note: When the installation angle needs to be inclined, please use the 15-degree mounting bracket.
Doorbell Installation Method
When securing the doorbell, first engage the lower latch of the wall backplate
onto the doorbell. Then, press on the upper half of the doorbell to
automatically engage the upper latch.
Doorbell Removal
Before removal, turn off the tamper alarm in the app. Then, with one hand,
insert the removal pin into the disassembly hole with moderate force. Use your
other hand to hold and remove the doorbell.
Precautions
-
Avoid installing the doorbell on metal doors or load-bearing walls. Instead, try to position it in an area with an optimal Wi-Fi signal.
-
The doorbell contains a battery within its main body. Keep it away from heat and fire sources, and refrain from unauthorized disassembly or repairs. If the product gets wet, stop using it immediately.
-
Although the doorbell supports power bank charging, it’s best to remove the doorbell and bring it indoors for charging in low-temperature environments.
-
Use a certified SV power adapter to charge the doorbell to prevent potential damage
(Note: adapter must be purchased separately). -
If the doorbell is not in use for extended periods, ensure it’s fully charged at least once every 3 months.
Work status description
Personal information security
For the safety of you and your family, please make sure that the products you
purchase are not bound to any unauthorized person. Botslab will take strict
measures to protect the information security of you and your family.
Description of Hazardous material Contents
Note: A small patch of electronic components for special purposes is marked with ‘”‘X”” in the table (such as high voltage resistors, ceramic resistors, diodes), in which the lead content may exceed 0.1 % . As the screws and the core in the data cables using alloy with better performance, the lead content may also be exceed 0.1 %. These components are in accordance with the requirements of the exemption clause of the EU RoHs directive. Limited by the current global technology development, there are no other alternative technologies and components. The external lead contents of these components are in accordance with environmental protection requirements.
FCC STATEMENT
This device complies with part 15 of the FCC Rules. Operation is subject to
the following two conditions: (1) This device may not cause harmful
interference, and (2) this device must accept any interference received,
including interference that may cause undesired operation.
This equipment has been tested and found to comply with the limits for a Class
B digital device, pursuant to part 15 of the FCC Rules. These limits are
designed to provide reasonable protection against harmful interference in a
residential installation. This equipment generates uses and can radiate radio
frequency energy and, if not installed and used in accordance with the
instructions, may cause harmful interference to radio communications. However,
there is no guarantee that interference will not occur in a particular
installation. If this equipment does cause harmful interference to radio or
television reception, which can be determined by turning the equipment off and
on, the user is encouraged to try to correct the interference by one or more
of the following measures:
Reorient or relocate the receiving antenna.
– Increase the separation between the equipment and receiver.
– Connect the equipment into an outlet on a circuit different from that to
which the receiver is connected.
– Consult the dealer or an experienced radionv technician for help.
Any Changes or modifications not expressly approved by the party responsible
for compliance could void the user’s authority to operate the equipment.
This equipment complies with FCC radiation exposure limits set forth for an
uncontrolled environment. This equipment should be installed and operated with
minimum distance 20cm between the radiator & your body.
Operations in the 5.15-5.25GHz band are restricted to indoors usage only.
IC Caution:
This device contains licence-exempt transmitter(s)/receiver(s) that comply
with Innovation, Science and Economic Development Canada’s licence-exempt
RSS(s).
Operation is subject to the following two conditions:
This device may not cause interference.
This device must accept any interference, including interference that may
cause undesired operation of the device.
Operations in the 5.15-5.25GHz band are restricted to indoors usage only.
CE Declaration of conformity
This product complies with the radio interference requirements of the European
community.
Hereby, Botslab, Inc. declares that the product is in compliance with the
essential requirements and other relevant provisions o RE Directive
2014/53/EU. You can find the Declaration of Conformity on
http://www.botslab.com. In accordance with Article 10(2) and Article
10(10),This product is allowed to be used in all EU member states.
The device is restricted to indoor use when operated in the European Community
using frequency 5150MHz-5250MHz to reduce the potential for interference.
The device complies with RF specifications when the device used at least 20cm.
from your body.
Operation frequency(Max power)
Botslab Video Doorbell 2 Pro(Wi-Fi HomeBase)
BT: 2402MHz-2480MHz (-1.16dBm)
2.4G Wifi: 2412MHz-2472Mhz (17.35dBm)
SGWifi:
5150MHz-5250MHZ (16.03dBm)
5470MHz-5725MHZ (15.09dBm)
5725MHz-5850MHz (13.36dBm)
Botslab Video Doorbell 2 Pro
2.4G Wifi: 2412MHz-2472Mhz (14.0SdBm)
The operating temperature of the product is:-20 ·c-60 ·c
Manufacturer Name: Botslab Inc.
Address: 919 North Market Street, Suite 950, Wilmington, New Castle, Delaware,
USA
Product Name: Botslab Video Doorbell 2 Pro
Trademark: Botslab
Product Model: R811
After-Sales Service
Warranty Policy for Botslab Smart Camera Products
The product, if purchased out of China, will be repaired locally within 1 year
from the date of purchase. Please contact the local authorized distributor for
details.
Non-Warranty Policy for Botslab Smart Camera Products
- Cannot present valid warranty certificate and purchase invoice.
- Damages caused by usage, maintenance, and storage which are not performed following the product user manual and damages caused by disassembly and repair which are not authorized by Botslab.
- Damages which result of force majeure.
- Normal decolouration and wastage during usage will not be included into warranty service.
This symbol means the product must be discarded as household waste, and should be delivered to an appropriate collection facility for recycling. Proper disposal and recycling helps protect natural resources, human hearth and the environment. For more information on disposal and recycling of this product, contact your local municipality, disposal service, or the shop where you bought this product.