Botslab P4PRO Indoor Camera Pan and Kilt User Manual

June 6, 2024
Botslab

Botslab LOGO

Botslab P4PRO Indoor Camera Pan and Kilt

Botslab P4PRO Indoor Camera Pan and Kilt

Product Appearance

Product Appearance

Packing List

Please check whether the device and all accessories are complete upon unpacking.

Packing List

User Guide

  1. Connect to a power

  2. Find the USB power socket on the bottom of the camera, connect it to a power supply via the USB power cable. When the status indicator lights up in green, it means that the
    camera is ready for setup.
    Note: Please unplug the USB power cable horizontally to avoid accidentally damaging the socket by force.Connect to a
power

  3. Please make sure that your smartphone has connected to an available Wi-Fi connection.

  4. Please start wall-mount installation after you have added the camera to the app on your smartphone.

  5. Download the Botslab App and Set up the System Download the Botslab app from the App Store(iOS devices) or Google Play(Android devices).

  6. Add Camera

  7. Launch the Botslab APP, tap the Register button, and start creating your account. If you already have an account, you can log in directly.

  8. After logged in, click the”+” icon on the upper right corner of the screen. After the new page appears, choose your product, and finish adding your camera following the voice guidance and the interactive guidance on your app.
    Note: The following problems may cause the network connection to fail.

  * Complete the sound wave pairing in a quiet environment.
  * Check whether the wireless router has enabled preventive functions for Wi-Fi squatting.
  * Check the 2.4GHz band of Wi-Fi signal that the camera is trying to connect to.
  * The camera currently does not support WPA/WPA2-Enterprise for Wi-Fi encryption.
  * Please try to connect to non-bridging Wi-Fi.
3. After adding successfully, start your discovery.
  1. Ways for camera installation

  2. On a table

  3. To a ceiling

  4. On a wall with a bracket (requires the separately sold bracket with 1/4″ nut)Ways for camera installation

  5. Schematic diagram for installing the camera to a ceilingSchematic diagram for installing the camera to a ceiling Note: The wall for mounting must be able to bear at least three times the total weight of the camera and the base.

  6. Steps for installing the base

  7. Align buckle the on the fixing base, groove follow at the the bottom instructions of the printed camera at with the the buckle on the base, follow the instructions printed at the camera counter clockwise fully home until you feel a “click”.

  8. Likewise, follow the instructions printed at the bottom of the camera, and rotate the camera clockwise fully home until you feel a “click” to detach the camera from the base.

Steps for installing the base

Important Statement

  1. Personal information security
    To protect the information for you and your family, please make sure that the product you purchased was not bound by others without your permission. 360 Company always take strict measures to guard and protect the information safety of you and your family.

  2. Description of Hazardous material Contents

Toxic and Harmful Substances and Elementst Component
Plastic enclosure Circuit board components
Adapter Lens
Lead (Pb) 0
Mercury (Hg) 0
Cadmium (Cd) 0
Hexavalent 0
Polybrominated 0
Polybrominated 0

This form is prepared in accordance with SJ/T11364.

0: Indicates that for each item in this product, said hazardous substance id below the requirements set forth by the standard GB/T26572.
X: It indicates that the hazardous substance in at least one homogeneous material of this part exceeds the limit specified in GB/T26572. However, it satisfies limit requirements specified in the List of Exempt Applications of Hazardous Substances Identified in the Management Catalog.

Note:
A small patch of electronic components for special purposes is marked with “X” in the table (such as high voltage resistors, ceramic resistors, diodes), in which the lead content may exceed 0.1 % . As the screws and the core in the data cables using alloy with better performance, the lead content may also be exceed 0.1 %. These components are in accordance with the require­ments of the exemption clause of the EU RoHs directive. Limited by the current global technology development, there are no other alternative technologies and components. The external lead contents of these components are in accordance with enviornmental protection requirements.

This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.

Note:
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

  • Reorient or relocate the receiving antenna.
  • Increase the separation between the equipment and receiver.
  • Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
  • Consult the dealer or an experienced radio/TV technician for help.

Any Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated withminimum distance 20cm between the radiator & your body.

Manufacturer’s Name:
Beijing Visual World Technology Co., Ltd.
Address: Room 1721, 15F17F, Building 3, Jiuxianqiao Road Jia NO.10, Chaoyang District, Beijing
Product Name: Botslab Indoor Cam Pan & Tilt Trade Mark: Botslab
Model number: P4 Pro
Operating Temperature: 0° C to 45° c

This device is in compliance with the essential requirements and other relevant provisions of Directive 2014/53/EU. All essential radio test suites have been carried out.
Detailed DOC file please visit our website:https://smart.360.cn/en

  • The device complies with RF specifications when the device used at 20cm from your body.
  • Adapter shall be installed near the equipment and shall be easily accessible.
  • The plug considered as disconnect device of adapter.

Model: A806A-0501 00U-EU1
Input: 100-240V-S0/60Hz,0.2A
Output: SV=1.0A
Model:TEKA-UCA1 0EU
Input: 100-240V~S0/60Hz,0.2A
Output: SV=1.0A
Care for the environment! Must not be discarded with household waste!

RF Secification:

Function| Operation Frequency| Max RF
output power| Limit
---|---|---|---
2.4GWIFI 802.11 blg/n (HT20,HT40)| 802.11big/n(20MHz): 2412~2472MHz;

802.11n(40MHz):2422~2462MHz

| 17 62

·   dBm

| 0dBm 2

This product can be used across EU member states.

IC Caution:
This device complies with Industry Canada licence-exempt RSS standard(s). Operation is subject to the following two conditions:

  1. this device may not cause interference,
  2. this device must accept any interference, including interfer­ence that may cause undesired operation of the device.

This Class [Bl digital apparatus complies with Canadian ICE-003.

After-Sales Service

  1. Warranty policy of Botslab Indoor Cam Pan & Tilt
    This product comes with a One-year Local Warranty Service. For detail of warranty service, please kindly contact local Authorized Distributors in your country.

  2. Non warranty policy of Botslab Indoor Cam Pan & Tilt

  3. Cannot present valid warranty certificate and purchase invoice.

  4. Damages caused by usage, maintenance, and storage which are not performed following the product user manual and damages caused by disassembly and repair which are not authorized by 360.

  5. Damages which result of force majeure.

  6. Normal decoloration and wastage during usage will not be included into warranty service.

Contact Us
Official Site: smart.360.com
Customer Support: zh-service@360.cn
Facebook@360smartlife

Botslab Indoor Cam Pan & Tilt Warranty Card

  1. User Information
    Name ____ Tel __ _ E-mail ____ Post Code ___ _ Address

  2. Product information
    Color ____ _ SN

  3. Service Record

Service Record Fault Information Service Date Signature
     
     
     

Read User Manual Online (PDF format)

Loading......

Download This Manual (PDF format)

Download this manual  >>

Related Manuals