BOTSLAB C211+SD Baby Monitor Camera 2K Baby Video Monitor with Camera User Guide
- June 14, 2024
- Botslab
Table of Contents
Botslab Indoor Cam 2
Quick User Guide
Packing list
Please check whether the main nit and all accessories are complete upon unpacking,
Product appearance
Reset hole: When the camera is powered on, press the reset hole with the
thimble for 5 seconds, and the “Di* sound indicates a successful reset.
Memory card: Maximum storage of 256 GB.
Network configuration instructions
Download and install the APP
Method 1: Scan the QR code below with your mobile phone to download and
install the Bo slab APP.
Method 2: Search and download the Bo slab APP from App Store or Google Play,
and then install it.
Scan to download Bo slab APP
https://www.botslab.com/superappdownload.html
Connect to a power
Find the power socket on the bottom of the product and connect it to a
power supply. When the product status indicator lights up in flashing green,
it indicates that the camera is powered on for network configuration.
Note: If the status indicator lights are not flashing green, reset the
device now.
Add camera
Launch the Bo slab AP, tap the “Sign up button, and start creating your
account. ffyou already have an account, please log in directly and add a
camera
Method : Tap the “+* button in the upper right comer of the APP homepage
t0″Seant the code, then use your mobile phone to scan the QR code at the
bottom of the camera to enter the distribution page, and add the camera as
instructed,
Note:
- Complete the sound wave pairing in a quiet environment.
- Please make sure the camera is connected to a 2.4GHz Wi
Installation guide
Method 1: On a table ‘The camera can be placed on the leveled surface of a desk, table, tea table, etc.
Method 2: To a ceiling
- Drill holes i the ceiling and install expansion bolts and fix the base on the wall with screws.
- Align the fixing groove at the bottom of the camera with the Buckie on the base, and gently push it in i it cannot be pushed to complete the
Notes:
- Please start ceiling-mount/Installation after you have added the camera.
- The ceiling forxaounting must be able to bear at least 3 times the total weight of the camera and the base.
- Please rotate the picture for ceiling-mount installation: Settings – Image, night vision and sound – Rotate image – Inverse camera.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>