KOLINK 230913 Unity Meshbay Performance Midi Tower Case User Manual

User Manual Unity Meshbay Performance Midi Tower Case

ACCESSORY PACK CONTENTS

PANEL REMOVAL

• Left Panel – Unscrew the two thumbscrews and slide the glass panel backwards.
• Right Panel – Unscrew the two thumbscrews and slide off.
• Front Panel – Find the bottom cut out, stabilise the chassis with one hand, and pull from the cutout with a little force until the clips release.

MOTHERBOARD INSTALLATION

• Align your motherboard with the chassis to locate where the stand-offs should be installed.
  Once done, remove the motherboard and fasten stand-offs accordingly.

• Insert your motherboard I/O plate into the cutout at the rear of the case.

• Place your motherboard into the chassis, making sure the rear ports fit into the I/O plate.

• Use the provided motherboard screws to attach your motherboard to the chassis.

POWER SUPPLY INSTALLATION

POWER SUPPLY INSTALLATION

• Place PSU in the battam rear of the case, within the PSU shroud,
• Align the holes and secure with screws,

GRAPHICS CARD/PCI-E CARD INSTALLATION

VIDEO CARD/PCI-E CARD INSTALLATION

• Remove the rear PCI-E slot covers as necessary (depending on the slot size of your card)
• Carefully position and slide your PCI-E card into place, then secure with the add-on card screws supplied,  elf mounting vertically, remove the vertical PCI-E slot covers and attach a riser cable to the card {sold separately) before securing with the add-on card screws,

3.5″ HDD INSTALLATION

3.5″ HDD INSTALLATION

• Place the 3.5″ HDD into/on top of the HDD bracket and screw in if required,

2.5″ SSD INSTALLATION (REAR)

2.5″ SSD INSTALLATION

• Remove the bracket from the rear of the motherboard plate, attach your 2.5” drive and then screw back into place.
• Place the 2.5″ HDD/SSD into/on top of the HDD bracket and screw in if required,

TOP FAN INSTALLATION

TOP FAN INSTALLATION

• Remove the dust filter from the top of the case,
• Align your fan(s) to the screw holes on the top of the chassis and secure with screws.
• Replace your dust filter once secured,

FRONT/SIDE/REAR FAN INSTALLATION

FRONT/SIDE/REAR FAN INSTALLATION

• Align your fan to the screw holes on the chassis and secure with screws.

WATERCOOLING RADIATOR INSTALLATION

WATERCOOLING RADIATOR INSTALLATION

• Secure the fans to the radiator, then fasten the radiator inside the chassis by securing with screws from the outside,

I/O PANEL INSTALLATION

• Carefully check the labelling of each connector from the I/O panel to identify their function.
• Cross reference with the motherboard manual to locate where each wire should be installed, then secure one at a time. Please ensure they are installed in the correct polarity to avoid non-function or damage.

**** The WEEE symbol indicates that this product must not be disposed of with normal household waste, Through the correct disposal of this product, you will help protect the environment. For more information on the disposal of this product, please contact your local municipality, your waste disposal service or the shop where you purchased the product.

Pro Gamersware GmbH
GauBstrase 1, 10589 Berlin, Deutschland
info@gamersware.com
+49(0)30 83797272
www.kolink.eu 
support@kolink.eu

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>