RAIDER RD-JBC20 Jump Starter Battery Charger User Manual
- June 16, 2024
- Raider
Table of Contents
RAIDER
User Manual
power tools
USER’S MANUAL
RD-JBC20
RD-JBC20 Jump Starter Battery Charger
- LED display
- USB output
- Type C outlet
- ECS exit
- LED display
- Power button
Double isolation
Refer to instruction manual / booklet!
Original Instruction for Use
Dear Users,
Congratulations on buying a machine from the fastest growing brand for
electric, gasoline and pneumatic machines – RAIDER. With proper installation
and operation, RAIDER are reliable and reliable machines, and the work with
them will bring you real pleasure. For your convenience, there is an excellent
service network with 45 service stations all over the country.
Before using this machine, please read this „Instruction for Use“ carefully.
For the sake of your safety and to ensure proper use, read these instructions
carefully, including the recommendations and warnings therein. To avoid
unnecessary errors and incidents, it is important that these instructions
remain available for future reference to anyone who will use the machine. If
you sell it to a new owner, the „Instruction for Use“ must be handed over to
the new owner so that the new user can read the relevant safety precautions
and operating instructions.
„Euromaster Import Export“ Ltd is an authorized representative of the
manufacturer and owner of the trademark RAIDER. The address of the company‘s
management is in Sofia 1231, 244 Lomsko Shosse Blvd., tel. 02934 33 33, 934 10
10, www.raider.bg;
www.euromasterbg.com; e-mail:
info@euromasterbg.com.
Since 2006 the company has introduced the ISO 9001: 2008 quality management
system with scope of certification: Trade, import, export and servicing of
professional and hobby electric, pneumatic and mechanical tools and general
hardware. The certificate is issued by Moody International Certification Ltd,
England.
Technical data
| parameter | measure unit | value |
|---|---|---|
| Model | – | RD-JBC20 |
| output voltage | V | Output USB 1 5V2A, ;Output USB2 9V2A; jump start output |
DC12V (EC5 jump start output)
input voltage| V| 5V2A,9V2A
applicable car models for emergency start| –| can jump start below 4.0L(40 cc)
gas engine and below 2.0L(2000cc ) diesel engine
charging limit voltage| v| 16.8
jump starter output voltage| V| 12
recomended charging current| А| 2
starting current| A| 600
capacity| Ah| 18
Product use and operation instructions
5.Turn the car ignition switch to the START position.
6.After the car is started, unplug it within 30 seconds.
7.Remove the starter clamp.
8.Do not perform limit start-up tests on the product, and the interval between
continuous starts is more than 10 seconds
Notice:
Before start the car, it must be confirmed (EC5 connector) should be inserted
tightly and inserted to the end, otherwise the effect of the emergency start
of the car will be affected, and the plastic connector may be melted.
Before starting the car in an emergency, please check whether the connector on
the car battery is dirty. If there is any dirt, wipe the dirt off before using
it.
When the car is started in an emergency, if it cannot be started at one time,
please do not start it reluctantly.
First check whether the clip is properly clamped? Is the power of the machine
insufficient? Or is there any other fault in the car?
The clip of the engine start cable is clamped in a large area of metal. Do not
clamp it on a screw or a place with plastic, which will cause it to fail to
start.
Please use the special battery clip equipped with this machine to avoid damage
to this product and your car.
USB output port charging model
- All 3C products such as smartphones and tablets that support USB 5V travel charger can be charged by the jump starter (USB output )
- When connected to a charged 3C electronic product, press the power switch button, and the USB-5V/2A will appear in the power display.Lights up to indicate that the 3C electronic product is being charged
D. Lighting
- Press and hold the [Power Switch] button for 3 seconds to power on/ off the car jump starter.
- Press and hold the [Power Switch ] button for 3 seconds to turn on/off, it is the SOS emergency signal light.
- Press and hold the [Power Switch] button for 3 seconds to turn on/off, it is LED long-light lighting
Answers to questions
Question: What is the function of the car jump starter?
Answer: This small and exquisite emergency start-up power supply has full power and can charge various brands of mobile phones. It is suitable for PSP, MP3, Bluetooth headsets, GPS navigation equipment and other electronic equipment with DC 5V. This car jump starter is equipped with 3 LED lighting modes. The most important feature is being able to successfully start a 12V car.
Question: How to turn the LED light on and off?
Answer: Press and hold the switch (side) for three seconds to activate the LED light, then lightly press the switch (side) to start the flash (burst), then press Press a key to switch to SOS mode (send SOS distress signal), press again to turn off. ( On - Strobe - SOS - Off )
Question: Can the positive and negative poles be reversed?
Answer: It cannot be reversed. It is forbidden to reverse the positive and negative poles. It must be the red battery clip to stabilize the positive pole of the power supply “+”, and the battery clip to be black. Securely clamp the negative”-” of the battery. If the operation is reversed, it will cause damage to the power supply host, resulting in hidden dangers such as sparks.
Question Any tips before operation?
Answer: It cannot be reversed. It is forbidden to reverse the positive and negative poles. It must be the red battery clip to stabilize the positive pole of the power supply “+”, and the battery clip to be black. Securely clamp the negative”-” of the battery. If the operation is reversed, it will cause damage to the power supply host, resulting in hidden dangers such as sparks.
Question: Under what circumstances will the car be started with the jump starter ?
Answer: The car has been idle for too long, forgot to turn off the lights/radio, won’t start in cold weather ...
Question: What are the precautions for starting the car?
Answer: It is forbidden to start diesel vehicles. In the case of full power, according to the size of the car’s displacement/year/car’s power loss, the car’s displacement The lower the number, the relatively more starts: on the contrary, the higher the displacement, the less the number of starts. The exact number of starts depends on the condition of your vehicle. It is generally recommended that customers start a car with a smaller displacement.
Question: How long can the host be stored?
Answer: The design of the host circuit is very scientific, it can be stored for 3-6 months without use, but in order to better prolong the service life, it is recommended Charge it once a month. In extremely cold and hot weather, it is recommended to store at normal indoor temperature
Charging at home (230V charger charging)
- When the display shows 0% of the power, it means that the power has been exhausted. At this time, please charge the jump starter as soon as possible to ensure the best storage effect of the battery. It should be charged in time after each use.
- You can use the charger (output is SA) provided by other 3C products to plug into the 230V socket, plug one end of the data cable provided with this machine into the 5V output USB port of the charger, and the other end into the side of the machine. The Micro USB/Type-C USB charging input port can start charging.
- Charging time: It takes about 5~5 hours to charge at 5V/2A when it is completely dead.
- After charging, to save energy, please remove the charger from the 230V socket.
car charging ( cigarette lighter charging )
- You can use the 12V to 5V car charger (optional) to charge the machine. Plug the car charger into the cigarette lighter socket on the car, plug one end of the data cable of the machine into the 5V output USB port of the car charger, and insert the other end into the MicroUSB or Type-C USB charging input port on the side of the machine to start. to charge.
Important Notes
Please read the manual carefully before use Please use the special battery
clip provided with this machine to avoid damage to this product and your car,
and please charge it as soon as possible after use to ensure the best battery
storage effect When not in use, please fully charge it before placing it. It
is recommended to extend the battery life at least charge once every one
month.
Do not disassemble the machine by yourself, otherwise it may cause a safety
accident Please keep away from high temperature or humid environment and do
not soak in water to avoid damage. Stop using the battery immediately if you
find that the battery is swollen, leaking, or smells bad.
ENVIRONMENTAL PROTECTION.
In view of environmental protection electrical appliances, additional
accessories and packing must be subject to appropriate processing for reuse of
the compound materials.
According the European Guideline 2012/19/EC for Waste Electrical and
Electronic Equipment and its implementation into national right, power tools
that are no longer usable must be collected separately and disposed of in an
environmentally correct manner.
****EUROMASTER IMPORT EXPORT LTD
1231, Sofia, Bulgaria, 246 Lomsko shose Blvd.,
tel.: +359 700 44 155
fax: + 359 2 934 00 90
www.euromasterbg.com;
e-mail: info@euromasterbg.com