OLIGHT i3T 2 EOS Slim Tail Switch Flashlight User Manual
- June 16, 2024
- OLIGHT
Table of Contents
USER
MANUAL
i3T 2 EOS
Slim Tail Switch Flashlight.
IN THE BOX
Table 1:
Specification
COOL WHITE CCT: 5700~6700K CRI: 70
- Above data are tested per ANSI/PLATO FL 1-2019 standard in Olight’s labs for reference.
Figure 1
Remove the insulating film
Figure 2
Turn on/off
Figure 3
Momentary on
Figure 4-1
Change brightness level(1)
Figure 4-2
Change brightness level(2)
Figure 5-1
Set initial brightness level(1)
Figure 5-2
Set initial brightness level(2)
Figure 6
Battery Installation
AVAILABLE BATTERIES
- 1 x 1.5V AAA alkaline battery (included)
- 1 x 10440 lithium battery
- 1 x AAA NiMH battery
Multi-language dictionary, see Table 2.
- Product specification, see Table 1.
- Operating instructions as below：
2.1 Remove the insulating film, see Figure 1.
2.2 Turn on/off, see Figure 2.
Press the tail switch firmly (you will hear a click).
2.3 Momentary on, see Figure 3.
Press it slightly to turn it on momentarily, and release it to turn it off.
2.4 Change brightness level(1), see Figure 4-1.
While the light is turned on, press the tail switch firmly twice in a row.
2.5 Change brightness level(2), see Figure 4-2.
While the light is turned off, press the tail switch slightly once and then
press it firmly once.
2.6 Set initial brightness level(1), see Figure 5-1.
Press slightly: While the light is turned off, press the tail switch slightly
five times in a row with intervals no longer than 1 second, and hold it down
on the fifth press. The current brightness will turn on for 1 second, and then
change to the desired brightness level. This indicates that the initial
brightness has been set successfully.
2.7 Set initial brightness level(2), see Figure 5-2.
Press firmly: While the light is turned off, press the tail switch firmly nine
times. After the ninth press, the current brightness level will turn on for 1
second and then change to the desired brightness level. This indicates that
the initial brightness has been set successfully.
2.8 Battery Installation, see Figure 6.
Unscrew the tail cap to insert the battery, ensuring that the positive end
of the new battery faces the flashlight head, and then screw the tail cap back
on.
WARNING
- Do not look directly at the light source or shine on the eyes, it may cause temporary blindness or permanent damage to the eyes.
- Don’t leave the battery near the fire or a heated source, or throw the battery into the fire.
- Do not give the product to children to play with, in order to avoid accidental swallowing.
- Don’t store, charge or use this light in a car where inside of temperature may be over 60°C, or similar places.
NOTICE
- Do not disassemble the product.
- It is normal that the light flickers when the battery is close to running out.
- Don’t short circuit (+) and (-) terminals with metallic object intentionally.
- For long-term storage, please remove the battery.
- Do not immerse the flashlight in seawater or other corrosive media as it will damage the product.
- Don’t use damaged, deformed battery, or with broken sleeve.
EXCLUSION CLAUSE
Olight is not liable for damages or injuries sustained resulting from the
usage of the product inconsistent with the warnings in the manual.
Table 2
Multi-language dictionary
| Low | High | Tap | Tap and hold | Press | Double press |
|---|
WARRANTY
Within 30 days of purchase: Contact the original seller for repair or
replacement.
Within 5 years of purchase: Contact Olight for repair or replacement.
This warranty does not cover normal wear and tear, modifications, misuse,
disintegrations, negligence, accidents, improper maintenance, or repair by
anyone other than an authorized retailer or Olight itself.
USA Customer Support [email protected]
Global Customer Support
[email protected]
Visit www.olightworld.com to see our
complete product line of portable illumination tools.
Dongguan Olight E-Commerce Technology Co., Ltd
4th Floor, Building 4, Kegu Industrial Park,
No. 6 Zhongnan Road, Changan Town,
Dongguan City, Guangdong, China.
Made in China
