Reverb RGBA 4 In 1 LED Wash Light User Manual
- June 15, 2024
- Reverb
Table of Contents
Reverb RGBA 4 In 1 LED Wash Light
Product Information
Specifications
- Power consumption: 192W
- Power supply: 100~240V, 50/60Hz
- Dimensions: 1030×73.4×81.4mm
- Weight: 3.2kg
- Housing material: Aluminium
Safety Advice
WARNING: Please read the user manual carefully before operating the product.
Product Overview
The RGBA 4-IN-1 LED Wash Light and RGBW 4-IN-1 LED Wash Light are versatile
lighting fixtures designed for various applications.
The wash light bar includes multiple features and modes to create stunning
lighting effects.
In the Box
- 1 x LED wash light bar
- 1 x Power cable
- 2 x Mounting brackets & adjustable knobs
- 1 x User manual
Button Layout
The wash light bar features the following buttons:
- Bracket tightening knobs
- Bracket
- IEC power input
- Earth point
- LED display
- Function buttons
- 3-Pin XLR input
- 3-Pin XLR output
- IEC power output
Product Usage Instructions
Auto Mode
To access auto mode:
- Press the MODE button to show “Auto” on the LED display.
- Press the ENTER button.
- Use the UP and DOWN buttons to select the auto speed.
- Press the ENTER button.
- Use the UP and DOWN buttons to select the strobe speed.
- Press the ENTER button to confirm the setting.
Show Mode (built-in programs)
To access the show modes:
- Press the MODE button to show “Show” on the LED display.
- Press the ENTER button.
- Use the UP and DOWN buttons to choose the required program.
- Press the ENTER button.
- Use the UP and DOWN buttons to select the speed.
- Press the ENTER button.
- Use the UP and DOWN buttons to select the flash speed.
- Press the ENTER button to confirm the setting.
Sound Mode
To access the sound modes:
- Press the MODE button to show “Sound” on the LED display.
- Press the ENTER button.
- Use the UP and DOWN buttons to choose the required sound mode.
- Press the ENTER button.
- Use the UP and DOWN buttons to select the sound sensitivity.
- Press the ENTER button to confirm the setting.
Master / Slave Mode
To set the master unit:
- Select one of the auto, show, sound, color mix, or static color modes.
To set the slave unit:
- Press the MODE button to show “Slave” on the LED display.
- Ensure all slave units are set to the same DMX channel mode as the master unit.
Color Mix Mode
To access the color mix mode:
- Press the MODE button until “Colour Mix” shows on the LED display.
- Press the ENTER button.
- Use the UP and DOWN buttons to select the brightness.
FAQ
Q: How do I change the operating mode?
- A: To change the operating mode, press the MODE button and select the desired mode using the UP and DOWN buttons.
Q: How do I adjust the speed settings?
- A: Use the UP and DOWN buttons to adjust the speed settings while in auto mode, show mode, or sound mode.
- Press the ENTER button to confirm the setting.
Q: How do I set up the master and slave units?
- A: Set the master unit by selecting one of the available modes.
- To set the slave unit, press the MODE button to enter slave mode.
- Ensure all slave units are set to the same DMX channel mode as the master unit.
Safety Advice
WARNING
- Before your initial start-up, please make sure that there is no damage caused during transportation.
- Should there be any damage, consult your dealer and do not use the equipment.
- To maintain the equipment in good working condition and to ensure safe operation, the user must follow the safety instructions and warning notes written in this manual.
- Please note that damages caused by user modifications to this equipment are not subject to warranty.
IMPORTANT
- Handle the power cable and all mains voltage connections with particular caution!
- Never remove warning or informative labels from the unit.
- Do not open the equipment and do not modify the unit.
- Do not switch the equipment on and off in short intervals, as this will reduce the system life.
- Only use the equipment indoors.
- Always disconnect the power from the mains when equipment is not in use or before cleaning! Only handle the power cable by the plug. Never pull out the plug by pulling the power cable.
- Make sure that the available mains supply voltage is between 100~240V AC, 50/60Hz.
- lf the equipment is dropped or damaged, disconnect the mains power supply immediately and have a qualified engineer inspect the equipment before operating it again.
- lf your product fails to function correctly, stop use immediately.
- Pack the unit securely (preferably in the original packing material), and return it for service.
- Warranty: One year from the date of purchase.
Product Overview & Technical Specifications
4-IN-1 LED WASH LIGHT
- The RGBA 4 IN 1(RGBW 4 IN 1) LED WASH LIGHT BAR contains 24pcs high brightness LEDs divided into 8 segments.
- They feature a 25° viewing angle lens to reach higher the wash effect of the wall. The unique effect further expands the versatility of this fixture.
- Onboard features include color mixing to create soft washes from its rich color palette, and chase programs controlled in auto mode or activated by music.
- Many chase programs are included and can be selected by the control panel along with speed and variable strobe.
- 24pcs*8W RGBA (RGBW) 4-in-1 Leds
- Beam angle: 25°
- Refresh rate: 2.1kHz
- DMX channels: 4 / 6 / 9 / 32 / 36 selectable
- Static color, auto, sound active, and master/ slave modes plus built-in programs
- 0-100% dimming and variable strobe
- The bracket allows for multiple rigging or floor standing applications
- 4 push button menu with LED display
- IEC power input/output
- 3-Pin XLR input/output
- Fan convection cooled
- (Note: Since this wash light is a high-power version, the fan will start working when the case temperature reaches 55°)
Specifications
- Power consumption: 192W
- Power supply: 100~240V, 50/60Hz
- Dimensions: 1030×73.4×81.4mm
- Weight: 3.2kg
- Housing material: Aluminium
In the box:
- 1 x LED wash light bar
- 1 x Power cable
- 2 x mounting brackets & adjustable knobs
- 1 x User manual
Dimensions
Button Layout:
- Bracket tightening knobs
- Bracket
- IEC power input
- Earth point
- LED display
- Function buttons
- 3-Pin XLR input
- 3-Pin XLR output
- lEC power output
Operating Instructions
Auto Mode:
- To access auto mode, press the “MODE” button to show Auto on the LED display.
- Now press the “ENTER” button and use the “UP” and “DOWN” buttons to select the auto speed between the “ENTER” buttons and use the “UP” and “DOWN” buttons to select the strobe speed between.
- Press the “ENTER” button to confirm the setting.
- To exit out of any of the above options, press the “MODE” button.
Show Mode (built-in programs)
- To access the show modes (built-in programs), press the “MODE” button to show the show on the LED display. Now press the “ENTER” button and use the “UP” and “DOWN” buttons to choose the required program
- Press the “ENTER” button and use the “UP” and DOWN” buttons to select the speed between the “ENTER” button and use the “UP” and “DOWN” buttons to select the flash speed between
- Press the “ENTER” button to confirm the setting.
- To exit out of any of the above options, press the “MODE” button.
Sound Mode
- To access the sound modes (built-in programs), press the “MODE” button to show sound on the LED display. Now press the “ENTER” button and use the “UP” and “DOWN” buttons to choose the required sound mode.
- Press the “ENTER” button and use the “UP” and “DOWN” buttons to select the sound sensitivity between
- Press the “ENTER” button to confirm the setting.
- To exit out of any of the above options, press the “MODE” button.
Master /Slave Mode
- The default setting for this fixture is master. To set the master unit, select from one of the auto, show, sound, color mix, or static color modes.
- To set the slave unit, press the “MODE” button to show the slau on the LED display.
- The unit is now in slave mode. To exit out of any of the above options, press the “MODE” button.
- Please ensure that all slave units are set to the same DMX channel mode as the master unit.
Color Mix Mode:
- To access the color mix mode press “MODE” until shows on the LED display.
- Now press the “ENTER” button and use the “UP” and “DOWN” buttons to select the brightness between
- Press the “ENTER” button and repeat for green ( ), blue ( ), amber ( ) / white( ), and strobe ( ).
- Use the “UP” and “DOWN” buttons to adjust the brightness of color and strobe speed ( )
- Value: 000 – 255 (000 = low brightness, 255 = high brightness)
- To exit out of any of the above options, press the “MODE” button.
Static Colour Mode:
- To access the static color mode, press the “MODE” button to show on the LED display.
- Now press the “ENTER” button and use the “UP” and “DOWN” buttons to choose the required color between
- Press the “ENTER” button and use the “UP” and “DOWN” buttons to select the strobe speed between 5t0~5t 9.
- Press the “ENTER” button to confirm the setting.
- To exit out of any of the above options, press the “MODE” button.
Display Backlight Setting
- To access the display backlight setting, press the “MODE” button to show the set on the LED display.
- Now press the“ENTER” button and use the “UP” and “DOWN” buttons to select. 6 ~15
- Press the “ENTER” button and use the “UP” and “DOWN” buttons to select between (10 seconds), 10 5 (20 seconds), 20 5 (30 seconds), 30 5 (60 seconds), 60 5 or (constantly on). ON
- Press the “ENTER” button to confirm the setting.
- To exit out of any of the above options, press the “MODE” button.
Program Direction Setting:
- To access the program direction setting, press the “MODE” button to show the on the LED display.
- Now press the “ENTER” button and use the “UP” and “DOWN” buttons to select 1r.
- Press the “ENTER” button and use the “UP” and “DOWN” buttons to select between
- Press the “ENTER” button to confirm the setting.
- To exit out of any of the above options, press the “MODE” button
DMX Mode:
- To access the DMX address mode, press the “MODE” button to show Addr on the LED display.
- Press the “ENTER” button and use the “UP” and “DOWN” buttons to choose one of the 4/6/9/32/36 DMX channel modes. Press the “ENTER” button and use the “UP” and “DOWN” buttons to set the DMX address code.
Channel Mode
| Channel | Value | Function |
|---|---|---|
| CH1 | 0-255 | All Red (0-100%) |
| CH2 | 0-255 | All Green (0-100%) |
| СН3 | 0-255 | All Blue (0-100%) |
| CH4 | 0-255 | All Amber (0-100%) / All White (0-100%) |
Channel Mode
| Channel | Value | Function |
|---|---|---|
| CH1 | 0-255 | Dimmer |
| CH2 | 0-9 | No Function |
| 10-255 | Slow->fast | |
| CH3 | 0-255 | All Red (0-100%) |
| --- | --- | --- |
| CH4 | 0-255 | All Green (0-100%) |
| CH5 | 0-255 | All Blue (0-100%) |
| CH6 | 0-255 | All Amber (0-100%) / All White (0-100%) |
Channel Mode
| Channel | Value | Function |
|---|---|---|
| CH 1 | 0-255 | Dimmer |
| CH2 | 0-255 | All Red (0-100%) |
| CH3 | 0-255 | All Green (0-100%) |
| CH4 | 0-255 | All Blue (0-100%) |
| CH5 | 0-255 | All Amber (0-100%) / All White (0-100%) |
| CH6 | 0-9 | No Function |
| 10-255 | Slow->Fast | Strobe |
| CH 7 | 0-3 | CH2~5 Color control |
| 4-7 | Program 1 (CH2~5 color control) | **** Effects channel |
| 8-11 | Program 2 (CH2~5 color control) | |
| … | … | |
| 124-127 | Program 31 (CH2~5 color control) | |
| 128-131 | Program 32 (built-in color effect) | |
| 132-135 | Program 33 (built-in color effect) | |
| … | … | |
| 200-203 | Program 50 (built-in color effect) | |
| 204-207 | Auto effect (Cycle run program effect 1~50) | |
| 208-211 | Sound mode 1 | |
| 212-255 | Sound mode 2 | |
| CH8 | 0-255 | Program Speed (Slow to fast) |
| CH9 | 0-255 | CH7 (4-95) Program effect background color selection |
(see final background color table for details)
Channel Mode
| Channel | Value | Function |
|---|---|---|
| CH1 | 0-255 | R1(0~100%) |
| CH2 | 0-255 | G1(0~100%) |
| CH3 | 0-255 | B1(0~100%) |
| CH4 | 0-255 | A1(0~100%) / W1(0~100%) |
| … | … | … |
| CH5 | 0-255 | R8(0~100%) |
| CH6 | 0-255 | G8(0~100%) |
| CH7 | 0-255 | B8(0~100%) |
| CH8 | 0-255 | A8(0~100%) / W8(0~100%) |
Channel Mode
| Channel | Value | Function |
|---|---|---|
| CH1 | 0-255 | R1(0~100%) |
| CH2 | 0-255 | G1(0~100%) |
| CH3 | 0-255 | B1(0~100%) |
| CH4 | 0-255 | A1(0~100%) / W1(0~100%) |
| … | … | … |
| CH29 | 0-255 | R8(0~100%) |
| CH30 | 0-255 | G8(0~100%) |
| CH31 | 0-255 | B8(0~100%) |
| CH32 | 0-255 | A8(0~100%) / W8(0~100%) |
| CH33 | 0-9 | No Function |
| 10-255 | Slow->Fast |
CH34
| 0-3| No Function
4-7| Program 1 (CH1~4 color control)
8-1| Program 2 (CH1~4 color control)
…| …
124-127| Program 31 (CH1~4 color control)
128-131| Program 32 (built-in color effect)
132-135| Program 33 (built-in color effect)
…| …
200-203| Program 50 (built-in color effect)
204-207| Auto effect（Cycle run program effect 1~50）
208-211| Sound mode 1
212-255| Sound mode 2
CH36| 0-255| Program Speed (Slow->fast)
CH37| 0-255| CH34 (4-95) Program effect background color selection
(see final background color table for details)
RGBA / RGBW Background Color
| Value | Color |
|---|---|
| 0-4 | R:000 G:000 B:000 A / W:000 |
| 5-9 | R: 51 G:000 B:000 A / W:000 |
| 10-14 | R:102 G:000 B:000 A / W:000 |
| 15-19 | R:153 G:000 B:000 A / W:000 |
| 20-24 | R:204 G:000 B:000 A / W:000 |
| 25-29 | R:255 G:000 B:000 A / W:000 |
| 30-34 | R:000 G: 51 B:000 A / W:000 |
| 35-39 | R:000 G:102 B:000 A / W:000 |
| 40-44 | R:000 G:153 B:000 A / W:000 |
| 45-49 | R:000 G:204 B:000 A / W:000 |
| 50-54 | R:000 G:255 B:000 A / W:000 |
| 55-59 | R:000 G:000 B: 51 A / W:000 |
| 60-64 | R:000 G:000 B:102 A / W:000 |
| Value | Color |
| --- | --- |
| 65-69 | R:000 G:000 B:153 A / W:000 |
| 70-74 | R:000 G:000 B:204 A / W:000 |
| 75-79 | R:000 G:000 B:255 A / W:000 |
| 80-84 | R:000 G:000 B:000 A / W: 51 |
| 85-89 | R:000 G:000 B:000 A / W:102 |
| 90-94 | R:000 G:000 B:000 A / W:153 |
| 95-99 | R:000 G:000 B:000 A / W:204 |
| 100-104 | R:000 G:000 B:000 A / W:255 |
| 105-109 | R: 51 G: 51 B:000 A / W:000 |
| 110-114 | R:102 G:102 B:000 A / W:000 |
| 115-119 | R:153 G:153 B:000 A / W:000 |
| 120-124 | R:204 G:204 B:000 A / W:000 |
| 125-129 | R:255 G:255 B:000 A / W:000 |
| Value | Color |
| --- | --- |
| 130-134 | R: 51 G:000 B: 51 A / W:000 |
| 135-139 | R:102 G:000 B:102 A / W:000 |
| 140-144 | R:153 G:000 B:153 A / W:000 |
| 145-149 | R:204 G:000 B:204 A / W:000 |
| 150-154 | R255 G:000 B:255 A / W:000 |
| 155-159 | R:000 G: 51 B: 51 A / W:000 |
| 160-164 | R:000 G:102 B:102 A / W:000 |
| 165-169 | R:000 G:153 B:153 A / W:000 |
| 170-174 | R:000 G:204 B:204 A / W:000 |
| 175-179 | R:000 G:255 B:255 A / W:000 |
| 180-184 | R: 51 G:000 B:000 A / W: 51 |
| 185-189 | R:102 G:000 B:000 A / W:102 |
| 190-194 | R:153 G:000 B:000 A / W:153 |
| Value | Color |
| --- | --- |
| 195-199 | R:204 G:000 B:000 A / W:204 |
| 200-204 | R:255 G:000 B:000 A / W:255 |
| 205-209 | R:000 G: 51 B:000 A / W: 51 |
| 210-214 | R:000 G:102 B:000 A / W:102 |
| 215-219 | R:000 G:153 B:000 A / W:153 |
| 220-224 | R:000 G:204 B:000 A / W:204 |
| 225-229 | R:000 G:255 B:000 A / W:255 |
| 230-234 | R:000 G:000 B: 51 A / W: 51 |
| 235-239 | R:000 G:000 B:102 A / W:102 |
| 240-244 | R:000 G:000 B:153 A / W:153 |
| 245-249 | R:000 G:000 B:204 A / W:204 |
| 250-255 | R:000 G:000 B:255 A / W:255 |
Multiple Fixture Linking
Multiple Fixture Linking:
- This fixture provides power linking via the power output on the rear allowing multiple units to be connected. The maximum number of fixtures that can be connected is 12 fixtures @240v or 6 fixtures @110V(including the first fixture).
- After the maximum number of fixtures are connected a new power run will need to be started.
- Please note: Caution should be used when power linking other fixtures to the RGBA /RGBW LED Wash Light as the power consumption of other fixtures will vary.
- Fixtures fitted with lamps often require 2/3 times more current on startup, these may require their power source.
Read User Manual Online (PDF format)
Loading......