OLIGHT i3T 2 EOS Slim Tail Switch Flashlight User Manual

June 16, 2024
OLIGHT

USER
MANUALOLIGHT i3T 2 EOS Slim Tail Switch
Flashlight i3T 2 EOS
Slim Tail Switch Flashlight.

IN THE BOX

Table 1:
Specification
COOL WHITE CCT: 5700~6700K CRI: 70

OLIGHT i3T 2 EOS Slim Tail Switch Flashlight - BOX 1

  • Above data are tested per ANSI/PLATO FL 1-2019 standard in Olight’s labs for reference.
    Figure 1
    Remove the insulating film

Figure 2
Turn on/off

OLIGHT i3T 2 EOS Slim Tail Switch Flashlight - film 1

Figure 3
Momentary on

OLIGHT i3T 2 EOS Slim Tail Switch Flashlight -
Momentary

Figure 4-1
Change brightness level(1)

OLIGHT i3T 2 EOS Slim Tail Switch Flashlight - Change

Figure 4-2
Change brightness level(2)

OLIGHT i3T 2 EOS Slim Tail Switch Flashlight - Change
1

Figure 5-1
Set initial brightness level(1)

OLIGHT i3T 2 EOS Slim Tail Switch Flashlight -
brightness

Figure 5-2
Set initial brightness level(2)

OLIGHT i3T 2 EOS Slim Tail Switch Flashlight - brightness
1

Figure 6
Battery Installation

AVAILABLE BATTERIES

  • 1 x 1.5V AAA alkaline battery (included)
  • 1 x 10440 lithium battery
  • 1 x AAA NiMH battery

Multi-language dictionary, see Table 2.

  1. Product specification, see Table 1.
  2. Operating instructions as below:

2.1 Remove the insulating film, see Figure 1.
2.2 Turn on/off, see Figure 2.
Press the tail switch firmly (you will hear a click).
2.3 Momentary on, see Figure 3.
Press it slightly to turn it on momentarily, and release it to turn it off.
2.4 Change brightness level(1), see Figure 4-1.
While the light is turned on, press the tail switch firmly twice in a row.
2.5 Change brightness level(2), see Figure 4-2.
While the light is turned off, press the tail switch slightly once and then press it firmly once.
2.6 Set initial brightness level(1), see Figure 5-1.
Press slightly: While the light is turned off, press the tail switch slightly five times in a row with intervals no longer than 1 second, and hold it down on the fifth press. The current brightness will turn on for 1 second, and then change to the desired brightness level. This indicates that the initial brightness has been set successfully.
2.7 Set initial brightness level(2), see Figure 5-2.
Press firmly: While the light is turned off, press the tail switch firmly nine times. After the ninth press, the current brightness level will turn on for 1 second and then change to the desired brightness level. This indicates that the initial brightness has been set successfully.
2.8 Battery Installation, see Figure 6.
Unscrew the tail cap to insert the battery, ensuring that the positive end of the new battery faces the flashlight head, and then screw the tail cap back on.
WARNING

  • Do not look directly at the light source or shine on the eyes, it may cause temporary blindness or permanent damage to the eyes.
  • Don’t leave the battery near the fire or a heated source, or throw the battery into the fire.
  • Do not give the product to children to play with, in order to avoid accidental swallowing.
  • Don’t store, charge or use this light in a car where inside of temperature may be over 60°C, or similar places.

NOTICE

  • Do not disassemble the product.
  • It is normal that the light flickers when the battery is close to running out.
  • Don’t short circuit (+) and (-) terminals with metallic object intentionally.
  • For long-term storage, please remove the battery.
  • Do not immerse the flashlight in seawater or other corrosive media as it will damage the product.
  • Don’t use damaged, deformed battery, or with broken sleeve.

EXCLUSION CLAUSE
Olight is not liable for damages or injuries sustained resulting from the usage of the product inconsistent with the warnings in the manual.
Table 2
Multi-language dictionary

Low High Tap Tap and hold Press Double press

WARRANTY

Within 30 days of purchase: Contact the original seller for repair or replacement.
Within 5 years of purchase: Contact Olight for repair or replacement.
This warranty does not cover normal wear and tear, modifications, misuse, disintegrations, negligence, accidents, improper maintenance, or repair by anyone other than an authorized retailer or Olight itself.
USA Customer Support cs@olightstore.com
Global Customer Support contact@olightworld.com
Visit www.olightworld.com to see our complete product line of portable illumination tools.
Dongguan Olight E-Commerce Technology Co., Ltd
4th Floor, Building 4, Kegu Industrial Park,
No. 6 Zhongnan Road, Changan Town,
Dongguan City, Guangdong, China.
Made in China

OLIGHT i3T 2 EOS Slim Tail Switch Flashlight - Icon

References

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>

Related Manuals