Merece CZK-3659 Portable Car Tire Inflator User Manual

June 6, 2024
Merece

Merece CZK-3659 Portable Car Tire Inflator-- logo

PORTABLE CAR TIRE INFLATOR
User ManualMerece CZK-3659 Portable Car Tire Inflator--
Inflator (Please read all this user manual carefully before using this tire inflator.)

PACKING LIST

1 x Air Compressor
1 x Carrying Bag
3 x Nozzle Adapters
1 x User Manual
1 x power adaptor
1 x DC Cable for Car Cigarette Lighter 1 x Replaceable Fuse

IMPORTANT TIPS BEFORE USING

  1. Please charge your air compressor fully before the initial use if you do not want to use the DC Cable for Car Cigarette Lighter.
  2. 1t is not suitable for inflation of tires of large and super heavy vehicles, such as trucks, large vehicles, etc.
  3. The electric source is DC 12V. 110V or 220V family electric source is prohibited unless with a adapter or transformer.
  4. Please press the SET button first to power on before inflating.
  5. Avoid over-inflating, never exceed the recommended pressure.
  6. 1t is normal that the product get hot when using, but don’t worry, it is safe and will not hurt human body.
  7. Do not run the air compressor continuously for more than 10 minutes. After each 10minutes, allow it to cool for a minimum of 15 minutes.
  8. Please charge the product in time after use, if it is not charged for a long time, the battery life may be shortened. And it can not be use to inflat when charging,
  9. Switch off the compressor if it makes an abnormal noise or overheats. Allow the compressor to cool down for at least 15 minutes.

SAFETY USING GUIDE

  1.  Keep the inflating at your sight and attention, Please check the gauge for the pressure and not let the pressure too high.
  2. Do not allow children to connect/disconnect the air compressor to/from power sources. Do not leave children unattended with the air compressor.
  3. Do not allow anyone to pump air into the mouth, ears, nose, etc. of people or animals, as this could result in serious injury or death.
  4. Do not use the air compressor near flammable fluids or gases.
  5. Always be careful when removing the air hose.
  6. Do not expose the air compressor or battery to rain or frost or temperatures above 122°F.
  7. Do not change the battery in humid or wet conditions.
  8. If the air compressor is going to be unused for long periods of time, it should be stored in a dry place, inaccessible to children.

SPECIFICATION

Model: CZK-3659
Size: 195x90x180mm
Input Voltage: 12V
Rated Power: 120W
Power Supply Type: Cigarette Lighter or battery (USB charging cord)
Power Cord Length: 9.84ft/3m
Continuous Operating Time:15 Minute Maximum
Large LCD Display Screen and integrated LED flashlight
Display Units: KPA, PSI, BAR, KG/ CM2
Accurate to ±0.5-2 PSI

PRODUCT DESCRIPTION

Merece CZK-3659 Portable Car Tire Inflator-- Tire
Inflator

1. LED flashlight 5. Charging port
2. Tire pressure gauge ON/OFF button
3. Switch of LED flashlight 6. Pressure hose
4. Switch button of inflating 7. Air nozzle storage

Merece CZK-3659 Portable Car Tire Inflator-- Car Tire
Inflator

USING STEPS

Merece CZK-3659 Portable Car Tire Inflator-- usjing

  1. Please press the SET button first, then press the ON/OFF button to start inflating.
  2. If you use the battery of the tire inflator to inflat, then please ignore step 1 and step 2, start directly from step 3. And it will power off if you do not inflat after 40 seconds
  3. When finish inflating, please switch off button.

HOW TO PRESET TIRE PRESSURE

Press “SET” to switch the unit, press the “+” or “-” key to increase or decrease the value, wait a few seconds after setting. After the number stops flashing, turn on the inflation ON/OFF switch to start inflating. Inflate to the specified air pressure, the tire inflator will automatically stop, please turn off the switch.Merece CZK-3659 Portable Car Tire Inflator--
button

Please press the SET button first to power on before inflating

Recommended tire pressure for cars

Merece CZK-3659 Portable Car Tire Inflator-- Car Tire
Infl

FAQ Please real this before use

  1. Will the tire inflator get hot when using it?
    Answer: It is normal to get hot when the unit is working. Because the cylinder need to power up quickly to provide enough power to inflate. But don’t worry, the temperature is warm and safe. (Please keep it far away from children.)

  2. Does the valve connector let a lot of air out of the tire when disconnecting?
    Answer: The nozzle is a push-type, which ensure no air leakage during inflation. But when you end the inflation and pull out the nozzle, it is normal that a little bit air will out of the tire. Please Be sure the valve in on straight.

  3. How many psi can I set at a time?
    Answer: You can preset psi according to the normal value of tire pressure. The maximum PSI you can set is 150. It is not suitable for inflation of tires of large and super heavy vehicles, such as trucks, large vehicles

  4. Why the battery icon shows less battery power when inflating but normal after inflating?
    Answer: Don’t worry, it is normal. Because the tire inflator use an air cylinder inside, when inflating, the air cylinder will have Instantaneous power consumption, the Current will become larger and the voltage will become less to support the Cylinder power on, which makes the battery power looks less on the LCD display. It will go back to normal after inflating.

BATTERY POWER

Charger your air compressor fully before the initial use a full charge can take up to 5 hours

Read User Manual Online (PDF format)

Loading......

Download This Manual (PDF format)

Download this manual  >>

Merece User Manuals

Related Manuals