Takdir AT800 Robot Vacuum Cleaner with Self Emptying Station User Manual

Takdir AT800 Robot Vacuum Cleaner with Self Emptying Station

Product Information

Specifications

• Product name : Robot Vacuum Cleaner
• Model : AT800
• Product size : 345mmX345mmX76mm
• Input : DC 24V
• Rated power : 0.6A
• Working voltage : 14.8V
• Battery type : Lithium-ion battery pack
• Battery capacity : 2600mAh
• Wireless connection : Wi-Fi IEEE 802.11b/n 2.4GHz
• Charging dock with dust box output : DC 19V
• Charging dock with dust box rated power : 1A
• Charging dock with dust box product size : 260mmX211mmX347mm
• Whole machine net weight : 7.8kg
• Executive standard : N/A

Product Introduction

Main Machine
The main machine of the robot vacuum cleaner is designed to efficiently clean various surfaces in your home. It is equipped with advanced features to provide a convenient and thorough cleaning experience.

The main machine includes the following components

• Main brush cover
• Main brush
• HEPA filter
• Side brushes

Charging Dock with Dust Box
The charging dock with dust box is an essential accessory for the robot vacuum cleaner. It not only provides a convenient place for the robot to dock and recharge but also serves as a self-emptying station for the collected dust and debris.

The charging dock with dust box includes the following components

• Dust bag handle
• Dust bag
• Cleaning knife (1)

Robot Mop Holder
The robot mop holder is an additional accessory that can be attached to the robot vacuum cleaner to enable mopping functionality. It allows you to achieve a deeper clean by removing dirt and grime from hard floors.

2-in-1 Water Tank
The 2-in-1 water tank is another optional accessory that can be used in conjunction with the robot mop holder. It provides a convenient way to control the amount of water used during mopping, allowing you to customize the cleaning process according to your needs.

Product Usage Instructions

Safety Precaution
Before using the robot vacuum cleaner, it is important to follow these safety precautions

• Do not use the product if it is severely damaged, as the battery may explode.
• Avoid using unauthorized accessories and charging docks.
• Do not disassemble or modify the product without permission.
• Avoid cleaning the main unit with a damp cloth or wet hands.
• Properly dispose of the battery by sending it to professional recycling organizations.
• Seek professional assistance from the manufacturer or service department for maintenance and repairs.
• When storing or transporting the product, ensure that it is turned off and placed in the original box.
• Avoid immersing the device in water.
• If the product will not be used for an extended period, fully charge it and store it in a cool and dry place.
• If necessary, remove the battery by following the specified steps.

Usage Restrictions
There are certain usage restrictions that should be observed when using the robot vacuum cleaner

• Avoid using the product on surfaces that may cause damage, such as sharp objects or hot surfaces.
• Do not use the product on wet surfaces or in wet environments.
• Avoid using the product on surfaces that are sensitive to moisture, heat, or chemicals.

Battery and Charging
Here are some important points regarding the battery and charging of the robot vacuum cleaner

• The robot vacuum cleaner is powered by a lithium-ion battery pack with a capacity of 2600mAh.
• The battery can be charged wirelessly through the charging dock with dust box.
• Make sure to charge the robot vacuum cleaner at least once every three months to avoid battery damage due to over-discharge.
• To replace the battery, follow the specified steps to safely remove it from the battery box.

FAQ

• Q: How often should I replace the dust bag?
  A: The dust bag should be replaced regularly to maintain optimal performance. Please refer to the user manual for specific instructions on how to replace the dust bag.

• Q: Can I use the robot mop holder and 2-in-1 water tank simultaneously?
  A: No, the robot mop holder and 2-in-1 water tank cannot be used simultaneously. You can choose to use either the mop holder or the water tank depending on your cleaning needs.

• Q: Can I use the robot vacuum cleaner on all types of floors?
  A: The robot vacuum cleaner is suitable for various types of floors, including hardwood, tile, carpet, and laminate. However, it is recommended to check the user manual for specific instructions and precautions for each type of floor.

User Manual
Robot Vacuum Cleaner with Self -Emptying Station

Thank you for choosing our robot vacuum cleaner! Please read this manual carefully before use and keep it for future reference. Hopefully we shall render you a more convenient life of smart home.
This product is subject to the material object. Our company reserves the right to update the product without prior notice.
Best wishes!

Safety precaution

Usage restrictions

• To avoid danger of suffocation, keep this plastic bag away from babies and children.
• This product is intended for household use only, not for outdoor surface (such as open balconies), non-floor level (such as sofas), etc.
• Do not use this product on a surface where there is no guardrail protection (such as duplex buildings, open balconies, and the top of furniture).
• Do not use it in an environment where the temperature is higher than 40°C, lower than 0°C, or there are any liquids and viscous objects on the ground.
• Before use, please hang up the ground cable on the floor to prevent cable-related troubles.
• Please put away the fragile items and sundries placed on the ground (such as vases, plastic bags) to avoid the main machine being blocked or collided during operation and cause damage to valuables.
• Do not allow persons (including children) who lack physical, sensory and intellectual capacity or experience and common sense to use this product without supervision or guidance.
• Do not let children use this product as a toy.
• Do not place the cleaning tool of the main brush in a child-accessible area.
• Do not let your hair, fingers and other parts close to the vacuum port of the machine when the machine is working.
• Do not use this product to clean up any burning objects (e.g. unextinguished cigarette butts).
• Do not let the host pick up hard or sharp objects (such as decoration waste, glass, iron nails, etc.).
• Do not use the protective cover of the laser ranging sensor, the upper cover of the main unit and the collision buffer as a handle to carry the machine.
• To clean and maintain the main unit and the charging dock with dust box, first turn off the machine, pull out the plug from the socket, and disconnect the power supply. Do not immerse the main unit and the charging dock with dust box into water to wash or rinse it with water.· Do not wipe any part of the product with a damp cloth or any liquid.
• Do not use the mopping mode on a carpeted floor.
• Please use this product in accordance with the instructions of this manual. Any loss and damage caused by improper use shall be borne by the user.

Battery and charging

• Incineration of the product is prohibited even if the  product is severely damaged, as the battery of the product may explode.
• Do not use any third-party batteries, chargers and charging dock.
• Do not disassemble, repair or modify batteries and charging dock without permission.
• Do not place charging dock near heat sources (such as radiators). • Do not wipe or clean the electrode of the charging dock with a damp cloth or wet hands.
• Do not throw away discarded batteries at will. Please send the battery professional recycling organizations.
• If the power cord is damaged, it must be replaced by professionals from the manufacturer, maintenance department and similarly service department.
• If you need to transport the product, please make sure that the main unit is turned off, and it is recommended to use the original box.
• Do not pour water into the device, or immerse the device in water.
• If it is not used for a long time, please turn off the main unit after fully charged and put it in a cool and dry place, and charge it at least once every three months to avoid damage to the battery due to over-discharge.
• To take out the battery, you need to use the correct tool, first remove the bottom battery cover screw, then open the product battery cover, unplug the battery connection terminal, and take out the battery from the battery box.
• The battery must be removed from the appliance before disposing of the appliance.
• The appliance must be switched off when the battery is removed.

Packing list

The illustrations of products, accessories, user interface, etc. in this manual are schematic diagrams and are for reference only. Due to product updates and upgrades, the actual product may be slightly different from the schematic diagram, please refer to the actual product.

Accessories installed on the robot

Accessories installed on the charging dock with dust box
Dust bag (include the one installed in the charging dock with dust box) Dust bags cannot be recycled, please replace them regularly.

Product Parameters

Charging dock with dust box

Whole machine

Product introduction

Main machine on the machine

Power on/off/one key start and stop

• Press hold & key for more than 3 seconds to turn on or Turn off the robot vacuum.
• Short press key to perform start cleaning and pause operate.

LED indicator
Green : normal operation/standby/charged.
Red : Low battery/fault alarm/charging.

Automatic recharge/APP distribution network

• Short press key to start/stop automatic charging.
• WIFI fast network distribution : long press the button for more than 3 seconds, the sweeper will make the first sound of “ding dong”, the voice prompt “start fast network distribution”, the green light of the power button will flash quickly, and it will enter the fast network configuration state;
• APP hotspot distribution network : long press the button for more than 6 seconds, the sweeper will make a second “ding dong” sound.
  The voice prompt “Start AP network configuration”, the green light of the power button flashes quickly, and the AP hotspot network configuration state is entered;

Indicator description

Charging dock with dust box

Dust bucket indicator light

Install charging dock with dust box

Place the charging dock with dust box against the wall on a flat ground, insert the power plug into a socket that meets the requirements, and turn on the power.
Make sure that there are no obstacles within 1.2 meters in front of the charging dock with dust box and within 0.5 meters on both sides.

How to use

Charge the robot
Press and hold button for 3 seconds to turn on the robot, and then press button to make the robot automatically recharge. The robot will enter the ready-to-work state when fully charged.

• For initial cleaning task, fully charge the robot.
• Before starting the cleaning task, tidy up the wires and items on the ground to avoid cable entanglement and collision in the cleaning process.
• It is recommended that the robot starts cleaning task from the charging dock with dust box
• When the power is insufficient during the cleaning process, the robot will automatically return to the the charging dock with dust box. After the power is sufficient, it will automatically return to the interrupted location to continue cleaning.

Power on/Power off/Pause

• Press and hold button for 3 seconds to turn on the machine; the green light of the power indicator flashes for 5 seconds, then the green light is always on, the device broadcasts a voice “Welcome to use our Robot vacuum cleaner, I am glad to serve you”, the robot enters the standby state, short press button, turn on Global cleaning mode; or press and hold ‘ button for 3 seconds to turn on the WIFI network.
• When the sweeping and mopping robot is stationary, press and hold the button for 3 seconds to turn off the machine, and the power indicator light turns off. During the cleaning process, press ‘ button to enter the recharge state, and press button to pause the cleaning task.

The robot will enter sleep state if there is no operation for 10 minutes; in the sleep state, short press any button to wake up the machine.
During charging, the robot cannot be turned off and will not enter sleep state.

Automatic recharge/manual recharge
When the battery is low in the cleaning process, the robot will automatically recharging; or after cleaning, the robot will automatically recharge.

In the cleaning process, short press button to pause the robot, and short press button the robot will return to the charging dock with dust box to collect dust and charge.

Set the cleaning mod
The default mode is the whole house cleaning mode; after connecting the APP, you can choose more modes in the APP.

APP connect
Scan the QR code below, or search for “Smart Life’ APP in the app store, download and install it. Open the APP, click “Smart Life” in the upper right corner of the home page, and follow the prompts to add devices.

Due to the upgrade and update of the APP, the actual operation may be slightly different from the above description, please operate according to the current instructions in the APP.

Fill the water tank with water or clean the mop halfway
Short press button to pause the robot, remove the mopping module, add water or clean the mop, then install the mopping module back, and briefly press button again to continue cleaning.

Fault condition

• When the robot is abnormal, it will give a voice prompt and the power indicator will flash red light. For solutions, please refer to ‘Troubleshooting”.
• If there is no operation for 10 minutes in the fault state, the robot will automatically enter sleep state

Reset device
Network distribution method

1.  Wi-Fi fast connection Press and hold the automatic recharge button for more than 3 seconds, the sweeper will make the first sound of “ding dong”, the voice prompt “start fast network distribution”, and the green light of the power button will flash quickly, entering the fast network configuration state; Network distribution method
2.  hotspot distribution network When the Wi-Fi quick connection cannot connect to the network, please select “hotspot network” Hotspot distribution network: Press and hold the automatic recharge button for more than 6 seconds, the sweeper will make a second “ding dong” sound, the voice prompt “Start AP distribution network”, and the green light of the host power button will flash quickly,

Maintenance

Steps for changing the dust bag
The LED indicator light is always red, indicating that the dust bag is full. At this time, a new dust bag is required. (recommended to be replaced every 4 weeks)

Please purchase dust bags from our designated sales channels.

Clear dust tube
If the indicator light of the charging dock with dust box is always on red, it is recommended to unplug the power plug, reverse the dust box, and check whether the dust channel is blocked by foreign objects. If the dust tube is blocked, refer to the figure below, remove the transparent cover of the dust tube with a screwdriver, and clean out the foreign objects

Violent disassembly is prohibited.
After cleaning the dust tube, put it back in place.

Clean the infrared lens/sensor head
Wipe the infrared lens/sensor head gently with a clean, soft, dry cloth. It is recommended to clean it once a month.

Clean the fan filter
The fan filter is under the dust bag. When the dust accumulates, wipe it with a clean, soft dry cloth. It is recommended to clean it once a month.

Clean the main brush
The main brush is a consumable item and should be cleaned at least once a week. It is recommended to replace the main brush every 6 or 12 months to ensure the cleaning quality.

1.  Turn over the sweeping and mopping robot, press the buckle on the main brush cover, and remove the main brush cover and main brush.
2. Use a cleaning tool to cut the entangled hair on the main brush, and use the cleaning brush on other end of the cleaning tool to clean the main brush.

When flipping, avoid collisions to prevent damage to the lidar.

Clean/replace the side brush
Remove the side brush.
nstall the side brush back in place after cleaning, or install a new side brush.

The side brush is a consumable item. Please replace it every 3-6 months to ensure the cleaning effect.

Cleaning the sensor
It is recommended to gently wipe each sensor with a clean, soft, dry cloth every week to ensure normal use of the machine.

Battery Maintenance

1. The robot has a built-in high-performance rechargeable lithium-ion battery pack. To maintain battery performance, Keep the battery charged at all times.
2. If the machine is not used for a long time, please turn it off and store it, and charge th battery at least once every three months to prevent battery damage due to overdischarge.

Clean up 2-in-1 water tank
Press and hold the release button of the 2-in-1 water tank, and simultaneously pull it out.
Buckle of the dust box
Release button of the 2-in-1 water tank

Press the buckle of the dus: box to open the dust box.

Remove the filter holder.

Use a cleaning brush to remove debris from the filter and filter holder.
Clean the dust box with running water.

The filter is a consumable item. It is recommended to replace it once every 3-6 months. Please buy the new filter from our official channels.

Open the cover of the water tank and add water.
Turn the 2-in-1 water tank over and remove the mop for replacement or cleaning.

•  If the mop is too dirty, it will affect the mopping quality, please clean it in time.
• Be sure to remove the mop for cleaning, and install it after drying. Do not clean it when it is installed on the 2-in-1water tank, otherwise the dirty water will clog the filter element.
• The mop is a consumable item. Please replace it once every 3 or 6 weeks.

Troubleshooting

When an operation exception occurs, the power indicator will flash red light quickly, and the robot will issue a voice prompt for some of the faults. Please refer to the table below to solve the problem.

Warranty

The after-sales service of this product is strictly in accordance with the “Consumer Rights Protection Law of the People’s Republic of China” and the “Product Quality Law of the People’s Republic of China” to implement after- sales services. The service contents are as follows

Non-Warrant
Claim The following cases are not covered by the free warranty, but maintenance services are provided, and the corresponding accessories and labor costs are charged

1. Unauthorized maintenance, misuse, collision, neglect, abuse, accident, alteration, abnormal use of non-product accesso- ries, or tearing, altering labels, anti-counterfeiting marks
2. The machine has exceeded the free warranty period
3. Damage caused by force majeure such as natural disasters
4. Not a performance failure.
5. Damage caused by consumers due to personal reasons

Warranty information

The main brush, side brush, main brush cover, filter screen, mop holder, cleaning tool, disposable mop and disposable dust bag are consumables provided with the product, and there is no warranty period.

Failure information of product performance

• To ensure the safety of the product during transportation, it is necessary to use the packing box. It is recommended that you keep the packing box for at least 30 days from the date of receipt
• This product is only sold in China (excluding Hong Kong, Macao and Taiwan), so the after-sales service of this product is only available in China (excluding Hong Kong, Macao and Taiwan).
• This warranty is only applicable to China (excluding Hong Kong, Macao and Taiwan).

Hazardous substances contained in this product

FCC Warning

This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions

1.  This device may not cause harmful interference, and
2.  This device must accept any interference received, including interference that may cause undesired operation.

Any Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.

Note : This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, th user is encouraged to try to correct the interference by one or more of the following measures

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.

RF warning for Mobile device
This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance 20cm between the radiator & your body.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>