SoundCore Motion+ Portable Speaker A3116 User Manual
- June 13, 2024
- Soundcore
Table of Contents
SoundCore Motion+ Portable Speaker A3116
USER MANUAL
Safety Instructions
- Avoid dropping.
- Do not disassemble.
- Soundcore Motion+ can be immersed in water up to 1m for up to 30 minutes.
- Avoid extreme temperatures.
- Do not use the device outdoors during thunderstorms.
- Do not use any corrosive cleaner / oil to clean.
What’s Included
At a Glance
1. Bass Indicator // Bass indicator color: White
2. Bass Button
3. Volume – Button
4. Multi-function Button
5. Volume + Button
6. Bluetooth Button
7. Bluetooth Indicator //Bluetooth indicator color: Blue / White
8. Power Button / Power Indicator // Power indicator color Red / White
9. USB Type C Port
10. 3.5mm Audio Input Port
Using Your Soundcore Motion+
1. Turn On / Off
ON: Press once
OFF: Press and hold for 2 seconds
Soundcore Motion+ is equipped with High-Resolution Audio. This specialty gives the speaker a better sound quality by referring to digital processes that allow playback of music using higher sampling rates.
Note: Soundcore Motion+ supports Qualcomm® aptX™.
2. Pair
a. Bluetooth mode
Slowly Flashing Blue (Fade in and out): Bluetooth Pairing Mode
Note: starts to connect to previous connected mobile device when speaker is turned on.
Solid Blue: Connected to a device
Note: With True Wireless Stereo technology, you can pair your Soundcore Motion+ with another Soundcore Motion+ to explore the best sound effects with left and right sound channels separated on both speakers.
MUSIC
Mobile phone
NOTE:
- When turned on, Soundcore Motion+ will automatically connect to the last connected device if available. If not, press the Bluetooth button to activate pairing mode.
- To pair a different device, press the Bluetooth button to re-enter pairing mode. Then repeat the pairing steps.
- Having connection problems? Remove Soundcore Motion+ from your device’s Bluetooth history and ensure it’s less than 3 feet away. Then try pairing again. To get the best sound quality, make sure there is a clear line of sight between the connected device and your speaker.
b. AUX-In mode
Note: Plugging in an audio cable will automatically switch to AUX mode.
When using AUX mode, control audio playback via the connected device.
Charging your Soundcore Motion+
NOTE:
- Use the included USB cable to charge your Soundcore Motion+ and make sure it is fully charged before its first use.
- USB type C cable only supports charge in, it does not support charge out.
- Disconnect your speaker from the charger when fully charged. Do not charge your speaker for extended periods.
- When not in use, store your speaker in a cool place.
Soundcore App
Specifications
Specifications are subject to change without notice.
-
Input: 5 V 2 A
-
Audio output: 30 W
-
Battery capacity : max.6700mAh
-
Charging time : Approximately 4 hours(When power is off and the adapter must be at least 5V/2A)
-
Playtime (varies by volume level and music content): 12 hours
-
Size: 257 x 79 x 81 mm / 10.1 x 3.1 x 3.2 inch
-
Weight (without packaging): 1050 g / 37 oz
-
Bluetooth version: V 5.0
-
Bluetooth range: 30m/99ft
-
Sound Frequency Range: 50Hz~40kHz
-
-
Support Videos
How to pair two devices with Motion+
DOWNLOAD
SoundCore Motion+ Portable Speaker A3116 User Manual – [Download PDF]
SoundCore Motion + Portable Speaker A3116 QSG – [Download PDF]
A3116 Soundcore Motion+ Declaration of Conformity – [Download PDF]