CableCreation CD0818 USB C Hub Multiport Adapter User Manual
- June 16, 2024
- CableCreation
Table of Contents
CD0818 USB C Hub Multiport Adapter
User Manual
DEAR CUSTOMER
Thank you for purchasing this product. To ensure optical performance and
safety, please carefully read these instructions before connecting,
operating, or using this product. We recommend keeping this manual for
future reference.
INTRODUCTION
This 7‐in‐1 adapter features Type‐C connectivity with HDMI, 3 USB‐A ports, SD/TF card slots, and Type‐C PD charging, offering an ideal solution for extending the port of Type‐C or Thunderbolt 3 host devices, such as PC/Laptop/Mobile phones, especially those with a single Type‐C port. The hub utilizes a DP Alt mode supported IC, allowing for HDMI video output at a maximum of k/30Hz while concurrently transferring USB 3.0 data at a maximum of 5Gbps. Additionally, the 3 USB‐ A ports enable connection of up to three USB‐A devices simultaneously, and the SD and TF card slots facilitate data transmission from these types of cards. Moreover, the Type‐C female port supports PD 3.0 with a maximum of 100W PD charging (10W dedicated to this roduct’s functionality, with the remaining power up to a maximum of 90W), and it can work with all DP Alt mode supported Type‐C host devices.
FEATURES
- Type‐C Male x1(connect to Type‐C host PC)
- USB‐A Female x3
- HDMI Female x1
- Type‐C Female x1(PD charging up to 100W)
- SD/TF Card slot x1
- Support SD 3.0 UHS‐I up to 104MBps data rate, Allow 2 card slots to work simultaneously
- Support max 100W PD charging , max 90W PD charging for PC
- Support HDMI resolution up to 4K@30Hz
SPECIFICATIONS
Input/Output Connector|
---|---
Input| Type-C Male x1
Output| HDMI xl USB-Ax3 SD/TFX1 Type-C PD Chargingxl
Type-C Malexl(Connect to host)
HDMIx1
Support HDMI max 4k/30Hz
USB-Ax3
.Max 5Gbps data transmission per port
Support short-circuit, over-current, over-voltage protection
SD/TFx1
Support SD3.0 UHS-I up to 104MBps data rate
Allow 2 card slots to work simultaneously
Type-C PD Chargingxl
Support max 100W PD charging, max 85W PD charging for PC (15w is dedicated to
the functioning of this product)
Support PD3.0 Fast Role Swap, the connected device will not get disconnected
while plugging PD Adapter in and out
Environmental|
Operating Temperature| 0°C to +45°C
Operating Humidity| 10% to 90 % RH (no condensation)
Storage Temperature| -10°C to +70°C
Storage Humidity| 10% to 90 % RH (no condensation)
Power Supply|
USB-C PD Charging Port| 100W(20V/SA)
Accessory|
User Manual| English Version
PACKAGE CONTENTS
Before attempting to use this unit, please check the packaging and make sure that the following items are contained in the shipping carton:
- Main unit x1
- User Manual x1
- Travel Pouch x1
CONNECTION DIAGRAM
ADDITIONAL INFORMATION
6.1 Something about 4K 30hz output, please kindly note:
6.1.1. Our products can support resolutions up to 4K at 30Hz and are also
compatible with lower resolutions such as 2K at 60Hz and 1080p at
60Hz. However, some monitor anufacturers may support 4K resolution but
not offer a 2K resolution option. If you encounter this issue, we suggest
seeking technical support from the monitor manufacturer for further
assistance.
6.1.2. In order to achieve a display result of 4K at 30Hz, it is essential
to ensure that your laptop or host is capable of supporting a 4K resolution,
and that the display being used is also compatible with this resolution.
6.2 If the HDMI port is not functioning properly, please try the following
steps:
6.2.1. Make sure the HDMI cable is securely connected to both the laptop and
the display.
6.2.2. Ensure that the HDMI display is set to output to the HDMI port. This
can typically be done in the display settings of the HDMI monitor.
6.2.3. Try using a different HDMI cable to see if the issue is with the cable
itself.
6.2.4. Try connecting the hub to a different display to see if the issue is
with the display rather than the monitor.
6.2.5. Restart the laptop and the display and try again.
6.2.6. Check for any updates for the laptop’s drivers or firmware, as well as
any updates for the display’s firmware.
6.3 Charging Issues.:
6.3.1. While it is possible to charge an iPhone or Android phone using the USB
3.0 interface, please note that the USB ports are primarily intended
for data transmission and may not support charging high‐power phones.
6.3.2. We highly recommend using a 100W PD (Power Delivery) charger to ensure
optimal performance of the hub, with 90W being used to charge the
connected laptop and 10W to power the hub. If you plan to use the
charging function for other devices such as iPads or Samsung cell
phones, we suggest using a PD charger with a power output of more than 30W
for best results.
6.4 USB‐A issues:
6.4.1. Portable drive
Please note that due to power output limitations of certain laptops, we
advise that you connect only one hard drive or SSD at a time to ensure
optimal performance
6.4.2. Wireless mouse, keyboard, wifi issues
Please be aware that the use of USB 3.0 devices may cause interference with
2.4GHz W iFi and other wireless devices due to similar frequencies. Intel has
stated that this issue only affects the 2.4GHz wireless band and not the 5GHz
band. To avoid this problem, we recommend setting your router to use the
5GHz band or just feel free to use wired mouse and keyboard.
6.4.3 SD/micro SD card file format issues.
To use the hub with an iPad Pro, it is necessary to update to
the latest version of iPadOS. Additionally, if you want to utilize an
SD/TF card on an iPad, you will need to format the card to a format that is
recognized by the iPad. The external storage
device must have only a single data partition and be formatted as
APFS, APFS (encrypted), macOS Extended (HFS+), exFAT (FAT64), FAT32 or
FAT. To change the format of the storage device, you can use either a Mac
or a PC.
6.5 SD/TF issues:
When using an SD/TF card with the hub, please take care to ensure that the
card is inserted at the correct angle and direction to avoid damaging the
card.
6.6 Type C female issues.
It’s important to note that you cannot connect a USB‐C to HDMI
adapter to the Type‐C female port on this product in order to connect an
additional external display.
The Type‐C female port is designed for charging your type c host(laptop, like
Samsung Smart phones, iPad Air, iPad Pro). It does not support data transfer
or video output.
If you encounter any questions or difficulties with our product,
please do not hesitate to contact us. We will do our best to resolve any
issues as quickly as possible and provide you with the necessary
support. We appreciate your business and look forward to serving you
again in the future.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>