Shark NV391 Series Navigator Lift-Away Pro Upright Vacuum User Manual
- June 9, 2024
- Shark
Table of Contents
Shark NV391 Series Navigator Lift-Away Pro Upright Vacuum User Manual
NV391 Series
QUICK START GUIDE
[Please be sure to read the enclosed Shark® Owner’s Guide prior to using your unit.]
WHAT’S INSIDE
A. Handle
B. Motorized Floor Nozzle
C. Wand
D. Crevice Tool
E. Wide Upholstery Tool
F. Dusting Brush
G. Pet Power Brush
H. Multi-Angle Dusting Brush
ASSEMBLY
MAINTENANCE
Empty dust cup after each use
Cleaning Filters
TIP :
Wash filters every 3 months to keep the suction strong.
Rinse filters and allow to air-dry completely.
Tap loose dirt from foam filters as needed between washes.
Pre-Motor (foam and felt):
With the dust cup removed, take out the foam and felt filters and rinse them
with water. Tap loose dirt off filters between washes as needed.
Post-Motor (HEPA):
To access the HEPA filter, reach under the grill, pull the tab forward and
pull the grill away from the vacuum. Remove and rinse the HEPA filter.
Easy brushroll maintenance
Use a coin to open the 2 locks on the bottom of the floor nozzle.
Remove any string, carpet fibers, or hair that may be wrapped around the brushroll.
USING YOUR VACUUM IN LIFT-AWAY® MODE
WARNING:
Lift-Away mode requires stable footing. Using Lift-Away mode without stable
footing may result in personal injury.
TIP:
Our Lift-Away feature allows you to remove the pod from the floor nozzle to
easily clean stairs, above-floor areas with accessories, or hard floors with
the hard-floor attachments.
For questions or to register your product, contact us at 800-798-7398 or visit us online at sharkclean.com
©2017 SharkNinja Operating LLC. LIFT-AWAY and SHARK are registered trademarks
of SharkNinja
Operating LLC. DUST-AWAY and NAVIGATOR are trademarks of SharkNinja Operating
LLC.
DOWNLOAD
Shark NV391 Series Navigator Lift-Away Pro Upright Vacuum:
Quick Start Guide – [Download PDF]
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>