Panasonic ET-PKFMJ1 Connect Oceania Instruction Manual

: September 28, 2024
: Panasonic

Table of Contents

ET-PKFMJ1 Connect Oceania
Specifications:
Product Information:
Applicable Devices:
Components:
- Product Usage Instructions:
Before Installation:
Installation Steps:
- FAQ:
Q: What should I do if I encounter missing components?
Q: Can I use this bracket with devices other than ET-FMP50 /

ET-PKFMJ1 Connect Oceania

“`html

Specifications:

Model No.: ET-PKFMJ1, ET-PKFMJ2
Total Weight ET-PKFMJ1: Approx. 237 g (0.52
lbs.)
Total Weight ET-PKFMJ2: Approx. 207.8 g (0.46
lbs.)

Product Information:

This product is a bracket used to attach the Panasonic Connect
Co., Ltd. Media Processor (FMP series) to a 19-inch rack that
complies with the EIA standards (ANSI/EIA-310-D).

Applicable Devices:

Media Processor ET-FMP50 / ET-FMP20

Note: We may also support other products besides those mentioned
above. Please refer to the operating instructions for your product
or the following website for more information: Panasonic Projector
Website

Components:

Rack mounting bracket (TKZX5287)
ET-PKFMJ1
ET-PKFMJ2
Connecting angle (DPMH2109ZA/X1)
Connecting plate (DPMH2110ZA/X1)

Product Usage Instructions:

Before Installation:

Before installing, read and understand the Operating
Instructions and Functional Manual for the FMP series.

Ensure that all cables are disconnected from the FMP and the
power plug is removed from the wall outlet to prevent electric
shock.

Installation Steps:

Identify the appropriate bracket (ET-PKFMJ1 for single device,
ET-PKFMJ2 for two devices).
Attach the rack mounting bracket, connecting angle, and
connecting plate as per the instructions provided in the
manual.
Securely mount the FMP series device(s) onto the rack using the
brackets.
Double-check the installation to ensure stability and
safety.

FAQ:

Q: What should I do if I encounter missing components?

A: In case of missing components, please contact our customer
support for assistance and replacement parts.

Q: Can I use this bracket with devices other than ET-FMP50 /

ET-FMP20?

A: While designed for specific models, compatibility with other
devices may vary. Refer to our website or contact support for more
information.

“`

Operating Instructions
Rack Mounting Kit Commercial Use
Model No. ET-PKFMJ1 ET-PKFMJ2

The above illustration is an example combined with the FMP series.

Read before use This “Operating Instructions” is a manual for the brackets used to mount Panasonic Connect Co., Ltd. Media Processor (FMP series) on a rack. For installation instructions, please refer to the “Operating Instructions – Functional Manual” (available in English) for the FMP series.
To download the “Operating Instructions – Functional Manual” for the FMP series, visit the following website. Pour télécharger le manuel d’utilisation de ce produit en français et le « Manuel d’utilisation – Manuel des fonctions » pour la série FMP, visitez le site Web suivant. https://panasonic.net/cns/projector/

Thank you for purchasing this Panasonic product.
Before using this product, please read these “Operating Instructions” and the “Operating Instructions – Functional Manual” for the FMP carefully and save the
manuals for future use. Before using this product, be sure to read “Read this first!”.

LT0424AM0 -PS Printed in China

ENGLISH DPQX1722ZA/X1

Read this first!

Always follow these precautions

WARNING:
Do not allow children to reach the supplied screws. Accidentally swallowing them can cause a physical harm. z If swallowed, seek medical advice immediately.

CAUTION:
Disconnect all cables from the FMP and disconnect the power plug from the wall outlet before installation. Failure to do so may result in electric shock.
Do not install in any way other than the specified method. Doing so may cause the FMP to fall or break, resulting in injury.

2

About this product

Intended use of the product
This product is a bracket used to attach the Panasonic Connect Co., Ltd. Media Processor (FMP series) to a 19-inch rack that complies with the EIA standards (ANSI/EIA-310-D).

ET-PKFMJ1 ET-PKFMJ2

Used when mounting a single FMP series device onto a rack.
Used when mounting two FMP series devices side-by-side onto a rack.

Applicable device

Media Processor ET-FMP50 / ET-FMP20

Note z We may also support other products besides those mentioned above. Please refer to the
operating instructions for your product or the following website for more information. https://panasonic.net/cns/projector/
Components
Please confirm that the following components are included. The components may vary depending on the product.
Rack mounting bracket <2 pcs>
(TKZX5287)

ET-PKFMJ1
Screw (M3 × 6) <6 pcs> (XYN3+F8FJK) Rack mounting bracket <2 pcs> (DPMH2160ZA/X1)

ET-PKFMJ2

Connecting angle <4 pcs> (DPMH2109ZA/X1)

Connecting plate <2 pcs> (DPMH2110ZA/X1)
Screw (M3 × 6) <22 pcs> (XYN3+F8FJK)
3

About this product (continued)

Attention z Store small parts in an appropriate manner, and keep them away from small children.

Note z The model numbers of components may be subject to change without prior notice.
Specifications

ET-PKFMJ1 Total weight ET-PKFMJ2 Total weight

Approx. 237 g (0.52 lbs.) Approx. 207.8 g (0.46 lbs.)

Panasonic Connect Co., Ltd.
Web Site : https://panasonic.net/cns/projector/ © Panasonic Connect Co., Ltd. 2024