RJ45 CableCreation USB C to 2.5G Ethernet Adapter User Manual
- June 6, 2024
- CableCreation
Table of Contents
Type-C to 2.5G Ethernet
Adapter
User Manual
DEAR CUSTOMER
Thank you for purchasing this product. For optimum performance and safety, please read these instructions carefully before connecting, operating or using this product. Please keep this manual for future reference.
INTRODUCTION
This Type-C to 2.5Gbps Ethernet Adapter is a high-performance and low expenditure solution. It enables your new Macbook Pro, Chromebook or other USB-C supported host PC to get access to a fast Ethernet network by connecting the RJ45 port.
FEATURES
- Supports Type-C input and 2.5Gbps RJ45 output
- Supports USB-C plug and play, hot swap
- Supports 10M/100M/1G/2.5G bandwidth
- Supports twisted pair crossover detection and auto-correction
- USB bus power (no external power supply)
- Support WOL(Wake-On-LAN), Full Duplex flow(10M/100M/1G/2.5G Rate), Auto-Negotiation
- Supports Operating system for computers:
Windows: Windows 7 / Windows 8/Windows10/ Windows Vista/
Windows XP (32/64bit).
Mac: Mac OS X 10.6 to 10.12.5
Note: If driver software installation is required, please download from below official website:
https://www.realtek.com/zh-tw/component/zoo/category/network-interface- controllers-10-100-1000m-gigabit-ethernet-usb-3-0-software
SPECIFICATIONS
Input/ Output Connector|
---|---
Input| Type-C Male ×1
Output| RJ45 ×1
RJ45 Basic Specifications|
Supported communication rate| 10Mbps/100Mbps/1Gbps/2.5Gbps
Main features supported| WOL(Wake-On-LAN)
Full Duplex flow(10M/100M/1G/2.5G Rate)
Auto-Negotiation
Size&Weight|
Size| mm(LWH)
Weight| g
Warranty|
Limited Warranty| 1 Year
Environmental|
Operating Temperature| 0 ℃ to +45℃
Operating Humidity| 10% to 85 % RH (no condensation)
Storage Temperature| -10℃ to +70℃
Storage Humidity| 5% to 90 % RH (no condensation)
Power Consumption|
Voltage| 4.75V～5.25V
Standby Power| <60mA (When Ethernet cable is not
connected)
Normal Operating Power| <250mA 10/100/1000/2500Mbps
Regulatory Approvals|
Certifications| FCC,CE
Accessories|
User Manual| English Version
PACKAGE CONTENTS
Before attempting to use this unit, please check the packaging and make sure the following items are contained in the shipping carton:
- Main unit x1
- User Manual x1
OPERATION
① Connect Type-C host PC to USB-C port of this product
② Connect Gigabit Ethernet port of this product to Ethernet Router with an
Ethernet cable
③ Automatically or manually set IP address of computer
CONNECTION DIAGRAM
DRIVER INSTALLATION
When this product is connected to windows OS PC that can automatically start “auto run” function for CD driver installation, the below tip will pop up on the screen if the PC has not been installed with the driver of this product, then we need to click “yes” to finish the installation.
The above tip will not pop-up if the connected PC can’t automatically start
“auto run” function for CD driver installation.In this case, we need to
manually set it with the following steps.
First, double click “This Picture” Icon on the desktop, we can see “CD-ROM”
icon (seen below left picture); second, double click this
icon, we can see “driver installation” icon (seen below right picture).
At last, double click “driver installation” icon, the above installation tip
will pop-up and click “yes” to finish installation.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>