EDIFIER Z9G-EDF192 Wireless On-Ear Headphones Instruction Manual

EDIFIER Z9G-EDF192 Wireless On-Ear Headphones Instruction Manual

Product Using Instruction

Power ON/OFF
Press and hold the power button for 2s.
Pairing

1. When they’re power off, press and hold the power button for 6s. The status light blinks blue.
2. Select “EDIFIER WH500” in your device setting to connect.

1st Pairing

1. Once the headphones are power on, they will enter Bluetooth pairing automatically. The status light blinks blue.
2. Select “EDIFIER WH500” in your device setting to connect.

Note:

1. For subsequent use, the headphones will auto-connect to device used last time.
2. Dual-Device Connection ：After connected to a device, restart and enter Bluetooth pairing to connect the second device. Then manually re-pair the headphones again from the first device to complete Dual-Device connection.

Reset

1. When the headphones are power on, press and hold the ”  +  ” and ”  –  ” at the same time for 6s.
2. The status light blinks white until reset is completed.
3. Once the headphones are reset, they enter pairing mode automatically.

Status Light

Bluetooth Status Blue LED blinks  Blue LED on for 3s  Blue LED blinks twice for every 5s for 10mins  Battery Status Red LED blinks twice every 5mins  Red LED on
LED off

Controls

Note:

1. Sound Mode switch between “Music Mode” & “Game Mode”.
2. Images are for illustrative purposes only and may differ from the actual product.

For more information, please visit our website: www.edifier.com  @Edifierglobal  @Edifier_Global @Edifier_Global
NOTICE: For the need of technical improvement and system upgrade,information contained herein may be subject to change from time to time without prior notice. Products of EDIFIER will be customized for different applications. Pictures and illustrations shown on this manual may be slightly different from actual product. If any difference is found, the actual product prevails. FCC Regulatory Compliance Warning: changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits
are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate
radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications.
However, there is no guarantee that interference will not occur in a particular installation.
If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the
user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help

RF Exposure Compliance
This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment.

ISED Regulatory compliance
This device contains licence-exempt transmitters that comply with Innovation, Science and Economic Development Canada’s licence-exempt RSS(s).
Operation is subject to the following two conditions:
This device may not cause interference.
This device must accept any interference, including interference that may cause undesired operation of the device.
This equipment complies with IC RSS-102 radiation exposure limits set forth for an uncontrolled environment.
IB-200-000000-14

https://www.edifier.com/

References

• Headphones, Speakers | A Passion for Sound -【Edifier】

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>