SEALEY MK73 Universal Mobile Rotating Panel Stand User Guide

SEALEY MK73 Universal Mobile Rotating Panel Stand

THANK YOU

Thank you for purchasing a Sealey product. Manufactured to a high standard, this product will, if used according to these instructions, and properly maintained, give you years of trouble free performance.

IMPORTANT: PLEASE READ THESE INSTRUCTIONS CAREFULLY. NOTE THE SAFE OPERATIONAL REQUIREMENTS, WARNINGS & CAUTIONS. USE THE PRODUCT CORRECTLY AND WITH CARE FOR THE PURPOSE FOR WHICH IT IS INTENDED. FAILURE TO DO SO MAY CAUSE DAMAGE AND/OR  PERSONAL INJURY AND WILL INVALIDATE THE WARRANTY. KEEP THESE INSTRUCTIONS SAFE FOR FUTURE USE.

• Refer to instruction manual
  

• Wear protective gloves
  

• Wear protective footwear
  

• Wear protective clothing
  

SAFETY

• Only use on firm, level, unobstructed surfaces which are capable of supporting the stand.
• DO NOT overload.
• Always load the stand carefully to ensure maximum balance and stability.
• DO NOT stand/ride on the stand, or allow others to do so.
• Replace or repair damaged parts. Use only recommended parts. Unauthorised parts may be dangerous and will invalidate the warranty.
• WARNING! Failure to comply with these instructions may result in loss of load, damage to the stand or other property and/or personal injury.
• WARNING! The warnings, cautions and instructions discussed in this instruction manual cannot cover all possible conditions and situations that may occur. It must be understood that common sense and caution are factors which cannot be built into this product, but must be applied by the operator.

INTRODUCTION

Ideal for doors, bonnets, bumpers, wings and spoilers.
Adjustable and rotating bars make this stand suitable for almost all panel types. Portable for easy manoeuvring of application from preparation to spray booth.
Includes: S Hooks (x2), Spray Gun Holder, Vertical Supports with Fixed Hooks (x4), Supports with Holes (x2).

SPECIFICATION

Model   No.:…………………………………………………………..MK73
Max. capacity ……………………………………………………….. 60kg
Overall length………………………………………………….. 1240mm
Short adjustable bar length …………………………………. 400mm
Long adjustable bar length………………………………….. 700mm
Height without bars ……………………………………………. 950mm

ASSEMBLY

Refer to attached Parts Diagram
Note: It is advisable to seek assistance of another person whilst assembling.

1. Assemble frame first then attach extension frame for holding panels.
2. Assemble bottom frame (5) rear brace (4) front upright bar (11) and foot frame (28).
3. Assemble stand frame only parts (1 and 2) at this point.
4. Insert stand frame parts to parts (4 and 11) by attaching handle (10).
5. Attach wheels and other ancillary parts shown on Parts Diagram.
6. Check all fixings for tightness.
   

Operation

1. Before placing panels on the stand the pin needs to be inserted through the vertical locking bar and secured with its R pin. Check that the vertical bar has engaged with the cog.
2. Take the weight of the panel/s by holding the handle before attempting to remove the locking pin.
3. Rotate the panel stand by placing a foot on the pedal (with the pin removed.)
4. Ensure that the pin is reinverted before moving the panel stand.
5. Move by lifting the two handles.
   MK73 Issue 1 25/11/19
   

Part Description

Environment Protection
Recycle unwanted materials instead of disposing of them as waste. All tools, accessories and packaging should be sorted, taken to a recycling centre and disposed of in a manner which is compatible with the environment. When the product becomes completely unserviceable and requires disposal, drain any fluids (if applicable) into approved containers and dispose of the product and fluids according to local regulations.

Note: It is our policy to continually improve products and as such we reserve the right to alter data, specifications and component parts without prior notice. If you require documentation for alternative versions, please email or call our technical team on [email protected] or 01284 757505.
Important: No Liability is accepted for incorrect use of this product.
Warranty: Guarantee is 12 months from purchase date, proof of which is required for any claim.

Customer Support

Sealey Group, Kempson Way, Suffolk Business Park, Bury St Edmunds, Suffolk. IP32 7AR
01284 757500
01284 703534
[email protected]
www.sealey.co.uk

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>