Shenzhen SXT2 Shaking Head Machine Camera Instruction Manual
- June 16, 2024
- Shenzhen
Table of Contents
Shenzhen SXT2 Shaking Head Machine Camera
Product Information
Specifications
- Compliance: FCC radiation exposure limits
- -Environment: Uncontrolled
- Minimum Distance: 20cm between the radiator and your body
Product Usage Instructions
Installation
- Choose a suitable location for the equipment.
- Ensure there is a minimum distance of 20cm between the radiator and your body.
- Place the equipment in the desired location.
- Connect the necessary cables and power source to the equipment.
Operation
- Power on the equipment using the designated power button.
- Follow the on-screen instructions or refer to the user manual for specific operations.
- Use the equipment as intended, keeping in mind the minimum distance requirement.
- Monitor the equipment for any abnormal behavior or malfunctions.
Maintenance
- Regularly clean the equipment using a soft, dry cloth to remove dust and debris.
- Avoid using harsh chemicals or abrasive materials that may damage the equipment’s surface.
- Keep the equipment away from excessive heat or moisture.
- If you encounter any issues or have questions, refer to the troubleshooting section in the user manual or contact customer support.
Frequently Asked Questions
Q: What are the FCC radiation exposure limits?
A: The FCC (Federal Communications Commission) sets limits on the amount of radiation emitted by electronic devices to ensure safety for users. This equipment complies with those limits.
Q: Why is a minimum distance of 20cm required between the radiator and the body?
A: The minimum distance requirement is to minimize potential exposure to radiation and ensure user safety.
Q: Can I install the equipment in a controlled environment?
A: No, this equipment is designed for use in an uncontrolled environment and should not be installed in a controlled environment.
PRODUCT INSTALLATION
- Download and install FtyCamPro, IOS is downloaded from Apple Store, and Android system is searched on GooglePlay. For easy installation, please scan the QR code below to download FtyCamPro installation .
Note: It is recommended to use the browser’s own or third-party QR code scanning software to scan and download the App. The We Chat scan function does not support direct download and installation of App files.
- When the camera is powered on, the PTZ will rotate and self-check during the startup process, and there will be a prompt sound during startup (if there is no prompt sound, you can reset and re-operate). Click “+” to add an activated camera.The connection method is mainly divided into “mobile phone”. Directly connected device”, “Network connected device” and “Add online device” to select the connection method you need.
- After jumping to the WiFi connection page, select the corresponding Wi-Fi hotspot and connect. After the connection is successful, return to the APP, and the device is added successfully. (If the APP does not auto- mati cally add a device, you can click Search to add the searched device
- After the camera is displayed online, click the camera you just added to watch the real-time video, and you can control the device in the video interface.
- Icons and buttons of the video interface
SD card setting: When you need to save the video, open the SD card setting to
set the allday recording, and you can set the recording time to save in
segments
- Firmware upgrade function: This function can be used to upgrade the firmware after the device optimization function
- Click the icon in the upper right corner, the video interface you need to watch can watch multiple video interfaces at the same time
- Product setting interface function: WiFi setting, the device can use WiFi connection in direct connection mode.
Motion detection function: When the motion detection function is turned on,
the device will automatically take pictures when there is an abnormal dynamic
picture in front of the camera.
Note: If the application always fails, try checking the following:
-
A. The mobile phone is not connected to the AP of the camera.
The configuration is to connect the mobile phone to the AP hotspot of the camera. -
B. Common routers are supported. Public routes that require login page authentication are not supported for the time being.
-
C. Pay attention to the network name, network password and UID when configuring.
-
D. Currently, Chinese Wifi name and password and special symbols are not supported.
-
E. Wifi signal of 5G is not supported.
Common Problem
-
Why can’t the APP search detect the camera/can’t configure the network?
A: Please confirm that the device is connected normally, and check whether the APP usage permission is restricted. -
Why does the camera always ask for a username and password, or rather, the incorrect user?
A: The default password of the camera is admin. If you forget the user name or password, you can restore the camera to the
factory settings to obtain the default user name and password. -
How can I restore the camera to factory settings?
A: Please press the reset button of the camera for about 5 seconds until the camera restarts.
FCC Warning
This equipment has been tested and found to comply with the limits These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates,uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, maycause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmfulinterference to radio or television reception, which can be determined by turning the equipmentoff and on, the user is encouraged to try to correct the interference by one or more of thefollowing measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
Caution: Any changes or modifications to this device not explicitly approved by manufacturer could void your authority to operate this equipment. This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:
(1) This device may not cause harmful interference, and (2) this device must
accept any interference received, including interference that may cause
undesired operation.
This equipment complies with FCC radiation exposure limits set forth for an
uncontrolled environment. This equipment should be installed and operated with
minimum distance 20cm between the radiator and your body.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>