mibro XPAW016 GS Active Watch User Manual

mibro XPAW016 GS Active Watch

Product Information

Specifications

• Model: XYZ-123
• Dimensions: 10 inches (L) x 5 inches (W) x 3 inches (H)
• Weight: 1 pound
• Power Input: 110V – 240V AC
• Power Output: 5V DC, 2A

Description
The XYZ-123 is a versatile and user-friendly product designed to enhance your daily life. It is a compact device with multiple functions and features that make it suitable for various applications.

Key Features

• High-resolution LCD
• Touch-sensitive interface
• Wireless connectivity via Bluetooth
• Built-in rechargeable battery
• Multiple pre-set modes for easy operation

Included Accessories

• XYZ-123 device
• USB charging cable
• User manual

Product Usage Instructions

Charging the Device
To charge the XYZ-123, follow these steps:

1. Connect one end of the USB charging cable to the device’s charging port.
2. Plug the other end of the USB cable into a power source (e.g., computer, USB wall adapter).
3. The device’s battery indicator will show the charging progress. Once fully charged, the indicator will turn green.

Powering On/Off
To power on the XYZ-123, press and hold the power button for 3 seconds until the LCD display lights up. To power off the device, press and hold the power button again until the display turns off.

Navigating the Interface
The XYZ-123 features a touch-sensitive interface for easy navigation. Simply tap on the corresponding icons or buttons displayed on the LCD screen to access different functions and settings.

Wireless Connectivity
The XYZ-123 can be connected to other devices via Bluetooth for seamless wireless communication. To enable Bluetooth pairing mode, go to the settings menu and select “Bluetooth.” Follow the on-screen instructions to complete the pairing process.

Using Pre-set Modes
The XYZ-123 comes with multiple pre-set modes that allow for easy operation. To select a mode, navigate to the mode selection menu and tap on the desired mode icon. Each mode has specific functions and settings tailored to different use cases.

Troubleshooting
If you encounter any issues or difficulties while using the XYZ-123, refer to the user manual for troubleshooting steps. If the problem persists, please contact our customer support for further assistance.

FAQs

• Q: Can I use the XYZ-123 while it’s charging?
  A: Yes, you can use the XYZ-123 while it’s charging. However, please note that the charging time may be longer if the device is in use.

• Q: How long does the battery last on a full charge?
  A: The battery life of the XYZ-123 depends on the usage and settings. On average, it can last up to 8 hours on a full charge.

• Q: Can I connect multiple devices to the XYZ-123 simultaneously?
  A: No, the XYZ-123 can only be connected to one device at a time via Bluetooth.

Please read this manual carefully before using the product and keep it properly.

Product Description

Packing list:

• Mi bro Watch GS Active (Including Silicone strap) X1
• User manual X1
• Magnetic charger X1
• Woven strap X1

1. Home button Tuming On: Long press the button for 2 seconds until the screen lights up.
   • Turning Off: Long press the button for 2 seconds until the screen turns off.
   • Return: Click .
2. Full touch display
3. Shortcut Button
4. Charging port (Positive)
5. Charging port (Negative)
6. Heart rate sensor
7. Barometer bore

Connect the watch

1. Please scan the QR code to download the “Mibro Fit” App.
2. Please use “Mibro Fit” to scan the QR code for pairing.

Untie a watch

1. Android system: select “Delete current device” in the App to unbind the device.
2. iOS system: select “Delete current device” in the App, and jump to the Bluetooth interface of the mobile phone system according to the prompt, Select Ignore Current Device to unbind the device

Charging instructions

1. Do not charge in a humid environment.
2. Make sure that the metal contact on the watch body and magnetic charger are not dirty or corroded.
3. Please clean the metal contact on the back of the watch and the magnetic charger with a clean flannel regularly. Make sure hatthecontactsofthewatchandthe magnetic charger are in full contact to ensure normal charging.
4. This product is not equipped with a power adapter. For the safety of your family and property, you can use a computer USB port or choose a power adapter with an output not exceeding 5V=1A when charging. Please purchase power adapters through formal channels, and never use low-quality and fake power adapters to avoid bursting or fire.

Features

Troubleshooting and after-sales regulations

Non-warranty regulations

1. Wear and dirt caused by users’ use, such as scratches and colour changes; As well as damage caused by contact with chemical reagents, sharp objects, falling, extrusion and deformation.
2. Unauthorized maintenance, collision, misuse, negligence, abuse, water ingress, accidents, and failures caused by the use of non-standard accessories of the product.
3. Tearing, altering labels, forging anti-counterfeiting marks, etc.
4. Damage caused by force majeure.
5. Non-compliance with performance faults is listed in the performance fault table.

Attention instructions

1. The measurement results of this product are for reference only, not for any medical purpose or basis. Please follow the doctor’s instructions and never make self-diagnosis and treatment based on the measurement results.
2. The waterproof grade of this product is SATM, but it is not against sea water, deep diving and long time soaking in water. At the same time, it doesn’t prevent hot water, because steam will affect the watch.
3. The company reserves the right to modify the contents of this manual without any notice. Some functions are different in the corresponding software version, which is normal.

Disposal of electrical and electronic equipment
The symbol of the crossed-out wheeled garbage can Symbol on your product. The symbol of the crossed-out wheeled garbage can on your product, battery, or packaging is a reminder that all electronic products and batteries must be disposed of separately at the end of their life and should not be disposed of with other household waste. It is the user’s responsibility to dispose of the device at an official collection point or service for the separate recycling of electrical and electronic equipment and batteries by the applicable local legislation (WEEE – Waste of Electrical & Electronic Equipment).

Options for Returning Old Devices
Owners of old devices may hand in these devices within the framework of the possibilities for the return or collection of old devices set up and available by public waste management authorities, to ensure proper disposal of the old devices. The following link provides an online list of collection and return points: https://www.ear-svstem.de/ear-verzeichnis/sammel-und- ruecknahmestellen.

Data Protection
We would like to remind all end users of waste electrical and electronic devices that you are responsible for deleting personal data on the waste devices to be disposed of.

Declaration of Conformity

Zhenshi Information Technology (Shenzhen) Co., Ltd., hereby declares that this device complies with the essential requirements and other applicable provisions of European Directives 2015/53 /EU and 2011/65/ EU. For the full EU Declaration of Conformity, please refer to our website. https://www.mibrofit.com/?doc/

Specifications

• Name: Mi bro Watch GS Active
• Model: XPAW016
• Size: >47 x 11.8mm
• Operational Frequency: 2400-2483.SMHz
• Signal transmission: ≤2odBm
• Battery capacity: 400mAh
• Nominal voltage: 3.8V
• Charging cut-off voltage: 4.35V
• Input: 5V=1A Max.
• FCC ID: 2BAYW-XPAW016
• Compatible with: Android 5.0 or iOS 10.0 and above
• After-sales service Email: service@mibrofit.com
• Manufacturer: ZhenShi Information Technology (Shanghai) Co., Ltd
• Address: Room 4015, Building 2, No.588 Zixing Road, Minhang District, Shanghai
• Exporter: ZhenShi Information Technology (Shenzhen) Co., Ltd
• Address: RM1401-1403,1408, Tower E, Galaxy World, Minzhi

FCC Statement

This equipment has been tested and found to comply with the limits for a Class B digital device, under part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used by the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and the receiver.
• Connect the equipment to an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.

Caution: Any changes or modifications to this device not explicitly approved by the manufacturer could void your authority to operate this equipment.
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.

RF Exposure Information
The device has been evaluated to meet general RF exposure requirements. The device can be used in 0mm exposure conditions, and compliance with exposure requirements.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>