mibro AC1 True Wireless Earbuds User Manual

AC1 True Wireless Earbuds
User Manual

Thank you for choosing our product, hope the fashionable appearance and high quality stereo can enrich your life. Note: Please fully charge it with the charging case before the first use when you receive the product.

Product Overview

1. Bicolor cartips
2. Charging Pin
3. Tone hole
4. Eartips Battery Indicator
5. Touch Multi-function Button(MFB)
6. Microphone
7. Noise-reducing microphone
8.  Charging Box Battery Indicator
9. Type-C Charge input

Charging

Please put the buds into the box before the first use, and connect the charging cable with the charging box to fully charge.

• Put the buds into the corresponding slot to ensure that the charging contact of the buds contacts the metal sheet.
• The red light is flashing the aids charging.
• When the buds indicator is solid, the battery is fully charged.

When the charging box is power is low than 10%, the white light flashes.

• Connect uSi3 adapter to charge it
• If it is not used for a longtime, it shall he charged at least once every three months.

Getting Starts

1. Open the cover of the charging box. The buds will automatically turn on. The buds will enter the Bluetooth pairing mode.
2. Open your mobile phone system Bluetooth, search for the Bluetooth name “Mibro Earbuds AC1” and click the device name to pair. The buds will prompt tune if the paring is successful.
3. The buds will record the last connection status of the device. Take out two buds and wear them properly, you will hear prompt tone indicating that both buds are connected and the device music car be played normally.

Function

Getting Off
The earbuds turn off automatically if:

1. You put earbuds back to the charging case. .
2. When earbuds Leave the charging case, but haven’ t connect to any devices within 5 minutes.
3. When the earphone battery is low (please charge it in time).

Safety Instructions

• Avoid dripping and dropping.
• Please use a certified charging adapter with an output voltage not exceeding 5v.
• Never disassemble or modify your earbuds for any reasons to avoid any damages and dangers.
• Keep the earbuds dry and do not submerge it in water.
• Keep outer reach of children, small parts included may be a choking hazard, and avoid using the LED indicator close to the eyes of children or animals.
• Do not use this earbuds during a thunderstorm to avoid irregular function and increased risk of the electric shock.
• Clean with a dry, soft lint-fret cloth, do riot use harsh chemicals or strong detergents to clean.
• The product shall not be exposed to excessive hot or wet.

Hearing Safety

• To avoid hearing damage; do not listen for long time at high volume.
• Do not turn the volume so high that you’re unable to hear your surroundings.
• Do not use earbuds while driving.
• You should use with caution or temporarily discontinued using in potentially hazardous situations.

Name and content of hazardous substances

This table is prepared in accordance with SJ/T 11364-2014,
Indicates that the content of the hazardous substance in all homogeneous materials of the component is below the limit specified in GB/ 1265 (2.
It means that the content of the hazardous substance in at least one homogeneous material of the component exceeds the limit specified in GB/1265(2.
This product meets the ROHS environmental protection requirements: there is no mature technology in the world to replace or reduce the lead content of some electronic components of circuit components, steel and copper alloys.

Trouble shooting and after sales regulations

2. During the call, the other party cannot hear the sound.
3. Unable to charge, the charging indicator is not on.

Non warranty regulations

1. Wear and dirt caused by users’ use, such as scratches and color changes; As well as damage caused by contact with chemical reagents, sharp objects, falling, extrusion and deformation.
2. Unauthorized maintenance, collision, misuse, negligence, abuse, water ingress, accidents, and failures caused by the use of non-standard accessories of the product.
3. Tearing, altering labels, forging anti-counterfeiting marks, etc.
4. Damage caused by force male tire.
5. Non compliance with performance faults listed in the performance faull table.

If you need after-sates service, please contact Mibro customer service:
Website: www.mibrofit.com
Customer service: 400-0908-508
Attention:
The illustrations of products and accessories in the manual are schematic diagrams for users’ reference only. Due to the update and upgrading of this product, the actual product may be different from the schematic diagram. Please take the actual product as the standard.

• Mibro brand owns the final right to interpret the goods.

FAQ

Q: One of the earbuds is silent while another is playing.

A:1. It may be that the buds can't be connected normally, which may occur in extreme cases. Please put the buds back into the charging box, and then take it out for reconnection after 5 seconds; 2. The silent buds may be out or power. Please put your buds back into the charging box to fully charge them and then take them out for reuse.

Q: The earbuds didn’t turn on when I get them from the charging case, it can' t turn on automatically.

A: Please check the power of charging case, if there is no power the earbuds can't turn on automatically. Please fully charge the product before use.

Q: The earbuds is placed in the charging compartment and still connected to the mobile phone.

A: Please check whether the earbuds is in good contact with the charging chamber, or the charging chamber is not powered.

Q: I have established connection with my smartphone, but l am not hearing any sounds?

A: Please make sure that you have turned up the volume of both devices Smartphone requires you to set up the Bluetooth earbuds as an audio output devices before transmutation of sound. Please check the instruction of your smartphone for details. If you are using a music player or other Bluetooth devices, please make sure it supports A2DP protocol.

Q: Why the connection is not stable and cuts out intermittently?

A; Please make sure there are no obstacles between the udbuds and your Bluetooth device; please make sure there is no radio or WiFi interference nearby.

Q: The sound is not very clear or the caller cannot hear my voice clearly.

A; Please adjust the volume on your phone and earbuds. Make sure there is no source of interference nearby. Stay close to your smartphone check if there's any improvement,

Package Contents

• Charging Box X 1,
• Earbuds X 2,
• Charging cable X1,
• User Manual X1,
• 3 pairs of ear tips (M size has been pre-installed)

Basic Parameters

Earbuds Basic Parameters;

Charge Box Basic Parameters:

Manufacture:
Zhenshi Information Technology (Shanghai) Co., Ltd.
Address:
Room 4015, Building 2, No. 588, Zixing Road, Minhang District, Shanghai

FCC Statement

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.

Caution: Any changes or modifications to this device not explicitly approved by manufacturer could void your authority to operate this equipment.
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:

1. This device may not cause harmful interference, and
2. This device must accept any interference received, including interference that may cause undesired operation.

RF Exposure Information
The device has been evaluated to meet general RF exposure requirement. The device can be used in portable exposure condition without restriction.

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>