Xiaomi mibro N50983 Air Smart Watch User Manual

Xiaomi mibro N50983 Air Smart Watch

product description

Packing list: Smartwatch(including strap) X 1, magnetic charging cable X 1, product manual X 1, product important information and warranty card X 1

Product overview

Buttons and touch

Connect the watch

1.  Scan the QR code above, or search for “WearFit pro” in the Android App Store/APP Store, download and install the WearFit pro APP.
2. Press and hold the button for 3 seconds to turn on, open and enter the “WearFit pro” APP, search for the device according to the APP connection wizard, select the device model, and complete the connection and pairing. Tips: After the first time the APP is connected to the iOS system of the Apple device, a Bluetooth pairing request will be prompted. Click “Pair” to connect, and the bracelet can receive notifications such as calls and text messages from the iOS system.

Charging
Please align the metal contacts of the magnetic charging cable and be close to the charging contacts of the watch. The magnetic charging cable will automatically be attached to the charging contacts of the watch to start charging, and the charging instructions will be displayed on the watch screen.

NOTE

1. Do not charge in a humid environment;
2.  Make sure that the metal contacts on the watch body and the magnetic charging cable are not dirty or corroded;
3.  Please clean the metal contacts on the back of the watch and the magnetic charging cable with a clean flannel regularly. Ensure that the contacts of the watch and the magnetic charging cable are in full contact to ensure normal charging;
4.  This product is not equipped with a power adapter. In order to ensure the safety of your family and property, you can use a computer USB port or choose a power adapter with an output not exceeding 5V 1A when charging. Please purchase power adapters through formal channels, and avoid using low-quality, fake power adapters to avoid bursting or fire.

Bluetooth data transmission
When connected to a mobile phone, the watch will instantly synchronize some data with the mobile phone via Bluetooth, including weather, notification messages, sports health data, etc. After the connection is disconnected or Bluetooth is turned off, the data will not be synchronized.

Precautions

1. The measurement results of this product are for reference only, not for any medical purpose or basis. Please follow the doctor’s instructions and never make self-diagnosis and treatment based on the measurement results.
2. The waterproof grade of this product is IP68, and it cannot be used for deep diving and long-term soaking in water. In addition, this product is not resistant to hot water, because water vapor will affect the smartwatch.
3.  The company reserves the right to modify the contents of this manual without any notice. Some functions are different in the corresponding software version, which is normal.

Basic parameters

• Name: Mibro Air
• Model: XPAW001
• Nominal voltage: 3.7V
• Input: 5V 1A Max.
• Size: 42×8.95mm
• Battery capacity: 200mAh
• Charging cut-off voltage: 4.2V
• Equipment requirements: Android 4.2 or iOS 8.4 and above

If you need after-sales service, please call the service phone: 400-0908-508 Client: Zhenshi Information Technology (Shanghai) Co., Ltd. Address: Room 4015, Building 2, No. 588, Zixing Road, Minhang District, Shanghai Manufacturer: Shenzhen Wake Up Technology Co., Ltd. Address: 1501, Block E, Phase II, Galaxy WORLD, Minle Community, Minzhi Street, Longhua District, Shenzhen August 2020 Version 1.0

FCC Warning

This device complies with part 15 of the FCC rules. Operation is subject to the following two conditions:

1. this device may not cause harmful interference, and
2.  this device must accept any interference received, including interference that may cause undesired operation. Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.

NOTE:
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

1.  Reorient or relocate the receiving antenna.
2.  Increase the separation between the equipment and receiver.
3.  Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
4.  Consult the dealer or an experienced radio/TV technician for help.

Radiation Exposure Statement
The device has been evaluated to meet general RF exposure requirements. The device can be used in portable exposure conditions without restriction.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>